• Journal of Adhesion and Interface
• /
• v.12 no.1
• /
• pp.26-33
• /
• 2011

Phosphoric acid treatments were conducted to improve the adhesion property of polyketone film to rubber. The effects of phosphoric acid treatments were characterized by using a contact angle analyzer and a XPS (X-ray photoelectron spectroscopy). Morphological changes were observed by using a scanning electron microscope (SEM) and an atomic force microscope (AFM) as the acid treatment condition varied in concentration and time. The contact angle was found to significantly decrease with the acid treatment. According to the XPS, increased wettability was attributed to the inclusion of oxygen containing groups such as hydroxyl, carbonyl and carboxyl by acid treatments. Cracks and pores were produced on the polyketone film surface and thus, roughness increased with the acid treatment. Interfacial adhesion strength between polyketone and natural rubber was largely improved by acid treatment due to the increased wettability and roughness of the polyketone surface. However, the higher level of acid treatment caused the degradation of the polyketone surface, and thus, its interfacial adhesion consequently decreased.

• Korean Journal of Organic Agriculture
• /
• v.9 no.3
• /
• pp.103-117
• /
• 2001

This study was inducted to investigate the effects of microbial fertilizers on the fields of young radish(Raphanus sativus L.), chemical components of plant and soil, and the microbial floras. Six microbial fertilizers, MPK+Husk+Palma, Husk+Palma, MPK+Compost, Compost, BIO Livestock Clean System(BLCS) cattle dropping, and Tomi were used. The yields of young radish were increased in six microbial fertilizer treatments. The fresh matter weight, the number of leaves, and the dry matter weight of young radish in BLCS cattle dropping treatment, the leaf length in MPK+Husk+Palma treatment, the sugar content in Husk+Palma treatment, arid the leaf width in Tomi treatment showed the highest amount, respectively. The effects of microbial fertilizers on chemical characteristics of young radish and soil were examined. Phosphoric acid amount of young radish in Tomi treatment was much higher than other treatments. Potassium amount of young radish showed high significance in all microbial fertilizer treatments compared with control, and shoved the highest in Compost treatment . Two components, phosphoric acid find potassium, in soil inoculated by microbial fertilizers showed significant. Phosphoric acid in the Tomi treatment and Potassium in Husk+Palma treatment were increased. The microorganic populations in soil inoculated with microbial fertilizers were examined. While the number of Bacillus in ceil was increased in MPK+Husk+Palma treatment, the numbers of total bacteria, actinomycetes, and fungi were increased in Tomi treatment.

• Carbon letters
• /
• v.12 no.2
• /
• pp.112-115
• /
• 2011

The scope of this work investigates the relationship between the amount of oxygen-functional groups and hydrogen adsorption capacity with different concentrations of phosphoric acid. The amount of oxygen-functional groups of activated carbons (ACs) is characterized by X-ray photoelectron spectroscopy. The effects of chemical treatments on the pore structures of ACs are investigated by $N_2$/77 K adsorption isotherms. The hydrogen adsorption capacity is measured by $H_2$ isothermal adsorption at 298 K and 100 bar. In the results, the specific surface area and pore volume slightly decreased with the chemical treatments due to the pore collapsing behaviors, but the hydrogen storage capacity was increased by the oxygen-functional group characteristics of AC surfaces, resulting from enhanced electron acceptor-donor interaction at interfaces.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.3
• /
• pp.220-224
• /
• 1991

Six reagents (water, citric acid, phosphoric acid, oxalic acid, acetic anhydride and maleic anhydride) were evaluated for their effectiveness is degumming rice bran oil. All chemical reagents tested were found to be significantly more effective than water in removing phosphatides from crude rice bran oil. Especially acetic anhydride and phosphoric acid were effective in reducing phosphorous levels (92.5% and 93.3% removeal, respectively). Nonhydratable phospholipids, lysophosphatidyl choline, were removed more effectively by the chemical reagents than by the water degumming. The major phospholipid(PL) components were phophatidyl choline. Oleic, linolieic and palmitic acids were the major fatty acids of PL in rice bran acetone insolubles(AI). The AI recovered by acetic anhydride degumming produced the most stable emulsions. However, the AI obtained from phophoric acid or oxalic acid treatments had very poor emulsifying properties.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.23-36
• /
• 1994

Most investigators recommended that porcelain surface should be roughened with abrasives and/or be etched with acid in repairing the fractured porcelain with composite resin. This study was designed to evaluate the effect of porcelain surface treatments on the bond strength between porcelain and composite resin by measuring the shear bond strength and observing the porcelain surface with SEM. 48 porcelain disc were fabricated with Vintage porcelain and embedded in epoxy resin with the test surface exposed. The specimens were divided four groups at random and the test surfaces of the four groups were prepared as follows : Group 1 : Porcelain surface was roughened with a fine diamond and treated with 32% phosphoric acid gel for 10 seconds. Group 2 : Porcelain surface was roughened with a fine diamond and etched with 8% hydrofluoric acid gel for 5 minutes. Group 3 : Porcelain surface was roughened with a coarse diamond and treated with 32% phosphoric acid gel for 10 seconds. Group 4 : Porcelain surface was roughened with a coarse diamond and etched with 8% hydrofluoric acid gel for 5 minutes. All specimens were washed for 30 seconds. A representative specimen of each group was selected and the porcelain surface was observed with SEM at 1000 magnification. Remaining specimens were silanated, bonded with composite resin, thermocycled, and shear-tested on specially designed zig connected to Instron machine. The results were as follows : 1. The shear bond strength of the group etched with hydrofluoric acid was significantly higher than that of group treated with phosphoric acid(p<0.01). 2. The shear bond strength of the group roughened with a fine diamond was not significantly different from that of the group roughened with a coarse diamond(p>0.01). 3. SEM examination of prepared porcelain surfaces revealed that the surface etched with hydrofluoric acid showed numerous microporosities, undercut, and rougher surface than the surface treated with phosphoric acid. 4. All specimens etched with hydrofluoric acid showed cohesive failure within porcelain, but specimens treated with phosphoric acid mainly showed adhesive failure between porcelain and composite resin.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.223-233
• /
• 1995

The purpose of this study was to evaluate the effects of surface conditioning with $10\%$ polyacrylic acid, etching with $38\%$ phosphoric acid, and polishing with a slurry of pumice on shear bond strengths of light-cured glass ionomer cement, chemically cured glass ionomer cement, and a composite resin to enamel, and to observe the failure patterns of bracket bondings. Shear bond strengths of glass ionomer cements were compared with that of a composite resin. Metal brackets were bonded on the extracted human bicuspids after enamel surface treatments, and samples were immersed in the $37^{\circ}C$ distilled water bath, and shear bond strengths of glass ionomer cements and a composite resin were measured on the Instron machine after 24hrs passed, and the deboned samples were measured in respect of adhesive remnant index. Scanning electron micrographs were taken of enamel surfaces after various treatments. The data were evaluated and tested by ANOVA and Duncan's multiple range test, and those results were as follows. 1. Shear bond strength of light-cured glass ionomer cement showed statistically higher than that of chemically cured glass ionomer cement. 2. Shear bond strengths of light-cured and chemically cured glass ionomer cements to enamel treated with $10\%$ polyacrylic acid and $38\%$ phosphoric acid showed statistically higher than those with a slurry of pumice. 3. According to scanning electron micrographs, enamel surface conditioned with $10\%$ polyacrylic acid is slightly etched and cleaned, that etched with $38\%$ phosphoric acid is severely etched, and that polished with a slurry of pumice is irregulary scretched and not completely cleaned. 4. After debonding, light-cured glass ionomer cement to enamel treated with $10\%$ polyacrylic acid showed less residual materials on the enamel solace than composite resin to enamel etched with $38\%$ phosphoric acid. 5. There was no significant difference in the shear bond strength of light-cured glass ionomer cement to enamel treated with $10\%$ polyacrylic acid and that of composite resin to enamel etched with $38\%$ Phosphoric acid.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.6
• /
• pp.682-687
• /
• 2018

We investigated the effects of a highly saline solution (HS) containing hypochlorous acid, calcium chloride ($CaCl_2$), and phosphoric acid ($H_3PO_4$) on cell death and growth rate of laver Porphyra yezoensis and green laver Ulva intestinalis. Cell death rates of laver treated with HS and HS plus hypochlorous acid (HS + HOCl) in the harvesting stage were less than 0.5%, and there were no significant differences between the HS and HS + HOCl treatments. However, cell death of green laver treated with HS + HOCl in the harvesting stage was greater than 81.2%. These results indicate that the addition of HOCl is highly effective to eradicate noxious green laver without causing damage to laver. The addition of HOCl and $H_3PO_4$ to HS did not increase the area or weight of laver blades. A combination treatment of $CaCl_2$ and HS, however, significantly increased the area and weight of laver lades compared to controls (P<0.05).

• Korean Journal of Poultry Science
• /
• v.35 no.1
• /
• pp.57-62
• /
• 2008

The study was conducted to evaluate the effects of dietary organic acid mixture(lactic acid 12%, formic acid 9%, citric acid 5%, butyric acid 5% and phosphoric acid 6%) on growth performance, organ weight, blood immunological parameter and intestinal villi morphology in broilers. Dietary treatments included 1) CON (basal diet), 2) OA1 (basal diet + 0.1% organic acid mixture) and 3) OA2 (basal diet + 0.2% organic acid mixture). Four hundred eighty hatched Arbor Acre broiler chickens were housed in 24 pens of 20 birds each. Eight replicate pens were allotted into each treatment by completely randomized design. Daily weight gain, feed intake and feed/gain were not significantly different among the treatments. In organ weight, that of gizzard was significantly heavier in OA2 than CON (Linear effect = 0.034). However, those of spleen and intestine were not significantly different among the treatments. Blood immunological parameters such as RBC, WBC and lymphocyte were not significantly difference. In intestinal villi morphology, villi length was increased in OA1 compared to CON (Quadratic effect = 0.050). In conclusion, 0.2% organic acid mixture was effective to improve gizzard weight of broilers.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.217-221
• /
• 1986

A column test was conducted to find out the effect of application of slaked lime, calcium sulfate, calcium superphosphate, and phosphoric acid on the solubility of lead in soil. The soil was adjusted to 310.8 ppm concentration of Pb and applied with amounts of calcium equivalent to 600, 1000, 2000 ppm as slaked lime; sulfate 144, 288, 432 ppm as calcium sulfate; phosphate 95, 190, 285 ppm as calcium superphosphate and phosphoric acid, respectively. The results obtained are as follows: 1. The increasing application of improvement agents reduced the amounts of water soluble Pb in soil. Phosphoric acid was the most effect among to the treatments. 2. The slaked lime treatment has the highest pH of soil and the lowest at the phosphoric acid one. The soil Eh has a reverse tendency the soil pH. 3. Water soluble Ca, $PO_4$ and $SO_4$ contents increased with increasing application amounts of improvement agents in soil. 4. $1N-NH_4$ OAC soluble Pb content in soil was a decreasing tendency in the order of calcium superphosphate, phosphoric acid, slaked lime, calcium sulfate and control after experiment.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.233-233
• /
• 2017

Algal communities are important to maintain the aquatic ecosystems function. Algae have short life cycles, they respond quickly to environmental change and their diversity and density can indicate and the quality of their habitat. The bloom forms before the rice seedings have emerged, it may present a physical barrier that prevents the seedlings from penetrating the floodwater. Wind may also move the algal bloom, pushing the young plants beneath the surface. Another harmful action develops when the water dries up and the algae form a layer at the bottom of the field. The layer envelops the seedlings, which are not yet deeply rooted, and drag them to the surface when the water is let in again. Soil utilization pattern can be the mail facter affecting soil physico-chemical properties, especially in soil phosphorus (P). Solid content of the algae culture solution increased with the increase in the nitrogen rather the phosphors concentration. Phosphoric acid was treated with conventional treatments (100-0%, before transplanting time-tillering stage), 50-50%, 0-100%, and un-treated. The herbicide was treated on the 7 DAT (day after transplanting). Green algae samples were collected 20 DAT. Total phosphoric acid was the highest at 0.06 in 50-50% treatment in 20 DAT. The amount of green algae was about twice (9.8 mg/20ml) that of un-treated. Total number of green algae was 54 species(Green algae 35 species, Euglena 9 species, Stone wheel 10 species). Among the phosphoric acid treatment methods, the number of occurrences of green algae were the highest with 39 species in 0-100%, followed by 50-50%, 28 species, conventional treatments, 22 species, non-treatment, 18 species, respectively. Rice Yield was not significantly different by phosphoric treatment time, but slightly higher than un-treated. The maximal algal biomass was observed about 2weeks or 1 month after transplanting; the subsequent decrease of the biomass was related to the consumption by grazers and to a deficient light under the rice canopy. Maximal algal growth was observed just before tillering. To estimate the suitable method of phosphorus application in puddled-soil drill seeding of rice, available phosphorus appearance of algal water bloom, and rice yield were investigated in paddy soil of rice-barley double cropping system.