• 한국압력기기공학회 논문집
• /
• 제5권1호
• /
• pp.14-19
• /
• 2009

NDE(Nondestructive examination) detects a flaw or discontinuity in materials. Flaws detected by the examination shall be evaluated for the decision basis of the integrity. The internal flaws of forging products can be detected by UT. However, UT has detection limits because of its reflected signal weakness. Normally, a 1mm or less flaw is known as the limit. If a flaw was detected, the size of flaw would be evaluated by AVG(or DGS) technique. To verify the evaluation data, alternative examination methods are needed. But there is no alternative examination methods until now. In this study, Phased array ultrasonic technique can be used to size the flaws in the generator rotor with focused beam of ultrasonic wave as a supplement method of AVG. Also, the phased array ultrasonic technique described enables the shape of flaw to be depicted exactly.

• 한국가스학회지
• /
• 제16권1호
• /
• pp.22-25
• /
• 2012

Welding and/or fusion in polyethylene(PE) system made on site is focused on the control of the welding or fusion process to follow proper procedure. The process control is important, but it is not sufficient for the long term reliability of a pipe system. To achieve the rate of failure close to zero, Non Destructive Testing(NDT) is necessary in addition to joining process control. For electrofusion joints several non-destructive testing methods are available. The ultrasonic phased array technique is possible to detect various defects including wire deviations and regions with lack of fusion. In this studies, testing was carried to detect the defect after electrofusion joining of polyethylene piping is utilized by the ultrasonic phased array technique. From testing data, ultrasonic phased array technique is recommended as a reliable non-destructive testing method.

• 한국압력기기공학회 논문집
• /
• 제9권1호
• /
• pp.8-14
• /
• 2013

Steam turbine blades and discs of nuclear power plants are one of the most highly stressed areas of turbine rotor, and periodic inspection of the blade roots is essential for monitoring integrity and preventing turbine failure. Ultrasonic technique is applied for volumetric inspection of blade root. However, the complexity of blade root geometry imposes challenges to inspection of blades and discs. Recently, phased array ultrasonic inspection technology is being applied to numerous power generation inspection applications including turbine rotor. The phased array ultrasonic technique requires customized inspection wedges which are generally necessary to generate effectively higher incident angle. But the usage of this wedge can cause access limitation for the lower stage blades of turbine because of the wedge front length. Therefore, the shear wave phased array probe which can generate high inspection angle without wedge is essentially necessary. In this study, feasibility study is conducted for the shear wave phased array ultrasonic probe application to blade and disc inspection. As results, the experimental results show that the shear wave phased array probe can detect the flaw and measure its size with reliable accuracy. Therefore if this shear wave phased array probe is applied to field inspection of blade and disc, more reliable inspection is expected for turbine having access limitation.

• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.440-446
• /
• 2006

The reactor vessel body and closure head are fastened with the stud bolt that is one of crucial parts for safety of the reactor vessels in nuclear power plants. It is reported that the stud bolt is often experienced by fatigue cracks initiated at threads. Stud bolts are inspected by the ultrasonic technique during the overhaul periodically for the prevention of failure which leads to radioactive leakage from the nuclear reactor. The conventional ultrasonic inspection for stud bolts was mainly conducted by reflected echo method based on shadow effect. However, in this technique, there were numerous spurious signals reflected from every oblique surfaces of the thread. In this study, ultrasonic phased array technique was applied to investigate detectability of flaws in stud bolts and characteristics of ultrasonic images corresponding to different scanning methods, that is, sector and linear scan. For this purpose, simplified stud bolt specimens with artificial defects of various depths were prepared.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권4호
• /
• pp.338-346
• /
• 2016

Purpose: The purpose of this research is to improve the reliability of the composite material blades used for the wind power generator, by applying the phased array ultrasonic testing technique out of the many nondestructive test into the blades. Method: The wind power generation composite blades are used, as a case study, in order to evaluate the reliability of the phased array ultrasonic testing technique. Defects that are most likely occurred in the field are injected into the different locations of the three different types of artificial test pieces and then phased array ultrasonic testing technique are applied to evaluate the reliability of its effectiveness. Result: As a result of the analysis of the defect signals by applying the A scan and B scan simultaneously, depth and width of the defect could be obtained. An area of defect was proportional to the amount of energy by color in B scan image. The larger amount of energy, reflected amount of energy was appeared in the order of red, orange, yellow, blue color. Conclusion: The most reliable testing method to detect the defect in composite blades for wind power generation is considered to be the combination of the other destructive testing technique with the phased array ultrasonic testing since the PAUT alone could not detect all range of the defects in the blades.

• 비파괴검사학회지
• /
• 제25권4호
• /
• pp.304-310
• /
• 2005

용접부 및 구조물에 발생된 결함의 깊이를 정밀하게 측정하기 위한 노력은 현재까지 계속되어 왔으며 앞으로도 계속되어야 할 연구분야중의 하나이다. TOFD 검사기법은 현재까지 결함의 깊이를 측정하기 위한 여러 가지 검사 방법중에 가장 정밀한 것으로 알려져 있다. 그러나 사용하는 초음파 굴절각에 따른 빔의 도달범위에 의하여 결함을 놓칠 우려가 있다. 본 여구에서는 일반적인 TOFD 기법대신 위상배열 초음파 기법을 이용한 TOFD 검사를 적용하여 두께가 두꺼운 검사대상에 대하여 결함의 검출능 및 깊이 측정결과를 비교하였다. 위상배열 초음파를 이용한 TOFD 검사를 사용함으로써 다양한 결함에 대하여 검출능 및 정확한 깊이 측정이 가능함을 실험적으로 확인하였다. 본 연구에서 개발된 위상배열 TOFD 기법은 발전설비의 압력용기와 같은 두꺼운 검사대상에 적용될 경우 검사 신뢰도 향상에 기여할 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.228-235
• /
• 2016

Flaws at dissimilar metal welds (DMWs), such as reactor coolant systems components, Control Rod Drive Mechanism (CRDM), Bottom Mounted Instrumentation (BMI) etc., in nuclear power plants have been found. Notably, primary water stress corrosion cracking (PWSCC) in the DMWs could cause significant reliability problems at nuclear power plants. Therefore, phased array ultrasound is widely used for inspecting surface break cracks and stress corrosion cracks in DMWs. However, inspection of DMWs using phased array ultrasound has a relatively low probability of detection of cracks, because the crystalline structure of welds causes distortion and splitting of the ultrasonic beams which propagates anisotropic medium. Therefore, advanced evaluation techniques of phased array ultrasound are needed for improvement in the probability of detection of flaws in DMWs. Thus, in this study, an investigation of focusing and steering phased array ultrasound in DMWs was carried out using a time reversal technique, and an adaptive focusing technique based on finite element method (FEM) simulation. Also, evaluation of focusing performance of three different focusing techniques was performed by comparing amplitude of phased array ultrasonic signals scattered from the targeted flaw with three different time delays.

• 비파괴검사학회지
• /
• 제32권2호
• /
• pp.185-191
• /
• 2012

일반적으로 위상배열 초음파검사 기법을 이용한 배관 용접부검사에서는 높은 검사 각도를 효과적으로 발생하기 위하여 ��지를 사용하게 된다. 그러나 용접부 또는 접근이 제한된 부위에 대한 검사는 위상 배열 초음파 탐촉자에 ��지를 부착하게 되면 ��지의 전단 길이로 인하여 검사체적을 포함하지 못하는 등의 문제점이 발생하게 된다. 따라서 ��지를 사용하지 않고 높은 검사 각도를 발생할 수 있는 횡파 위상배열 초음파 탐촉자를 적용해야 할 필요성이 있다. 본 연구에서는 굴절각도가 높은 횡파를 발생할 수 있는 위상배열 초음파 탐촉자를 설계하고 제작하여 다양한 깊이의 EDM 노치가 가공된 시험편에서 결함이 정확하게 검출되고 평가될 수 있는 지를 확인하였다. 결과적으로 본 연구에서 설계된 횡파 위상배열 초음파 탐촉자는 다양한 깊이의 결함을 검출하고 신뢰성 있는 정밀도를 나타내었으므로 향후 접근제한이 예상되는 발전설비 구조물의 검사에 적용된다면 효과적인 검사 결과를 보여줄 것으로 기대된다.

• 한국압력기기공학회 논문집
• /
• 제6권1호
• /
• pp.16-22
• /
• 2010

Cast austenitic stainless steel(CASS) is used in the primary cooling piping system of nuclear power plant for it's relative low cost, corrosion resistance and easy of welding. However, the coarse-grain structure of cast austenitic stainless steel can strongly affect the inspectability of ultrasonic testing. The major problems encountered during inspection are beam skewing, high attenuation and high background noise of CASS component. So far, the best inspection performance involving CASS components have been achieved using low frequency TRL(Transmitter/Receiver side-by-side L wave) angle beam probe. But TRL technique could not detect shallow defect and it contains an uncertainty for sizing capability. Currently, most of researchers are studying to overcome these challenge issue. In this study, low-frequency phased array TRL technique used to detect and sizing the flaws in CF8A cast austenitic stainless steel.As conclusion, we could detect and size not only axial flaw but also circumferential flaw using low frequency phased array technique.

• 비파괴검사학회지
• /
• 제37권1호
• /
• pp.13-20
• /
• 2017

일반 위상배열초음파 시스템은 배열된 개별의 소자에 시간지연을 적용함으로써 초음파 빔을 조향하고 초음파 이미지를 구성한다. 반면, full matrix capture(FMC)은 위상배열탐촉자에서 가능한 모든 송수신 조합의 A-scan 데이터 전체를 수집하는 신호 수집 방법이며, FMC 데이터의 후처리를 통해 기존 위상배열초음파와 동등한 이미지뿐만 아니라 기존 위상배열초음파에서 구현하지 못하는 다양한 이미지를 합성할 수 있다. 본 논문에서는, 균열 형태의 결함을 영상화할 수 있는 LLL mode total focusing method(TFM)에 대한 기본 알고리즘을 기술하고, 실험 및 초음파 시뮬레이션을 통해 수집된 FMC 데이터에 대해 이 기법을 적용하여 결함의 이미지를 합성하였다.