• 한국응용곤충학회지
• /
• 제47권4호
• /
• pp.457-465
• /
• 2008

본 연구는 모기에 활성을 나타내는 Bacillus thuringiensis subsp. tohokuensis CAB167균주에서 생산된 내독소결정단백질의 특성을 조사하였다. B. thuringiensis subsp. tohokuensis CAB167균주는 위상차 현미경과 주사전자현미경으로 관찰하여 일반적으로 모기에 활성을 나타내는 spherical type의 내독소결정 성단백질을 형성하는 것으로 나타났다. 국내에서 서식하는 지하집모기(Culex pipiens molestus), 빨간집모기(Culex pipiens pallens), 이집트숲모기(Aedes aegyti)에 대한 이 균주의 살충활성검정은 각각 173, 190, 580 ng/ml의 $LC_{50}$ 값으로 각각 활성을 보였다. B. thuringiensis subsp. tohokuensis CAB167균주에서 생산된 내독소결정성단백질의 SDS-PAGE를 통해 135, 80, 49와 28-kDa의 주요한 4개의 밴드를 나타냈다. 내독소결정성단백질의 소화에 영향을 미치는 곤충중장액과 유사한 trypsin효소를 처리하여 72와 63-kDa의 단백질이 새롭게 생성하였다. 파리목 위생해충인 모기에 활성을 나타내는 다른 7개의 B. thuringiensis 균주들의 내독소 결정성단백질과 혈청학적인 비교실험에서 독소단백질이 차이가 있는 것을 확인하였다.

• 한국결정성장학회지
• /
• 제28권5호
• /
• pp.222-227
• /
• 2018

$Zn_{1-x}Co_x$ Zeolitic Imidazolate Framework-8(ZIF)(x = 0~0.05)를 2-methylimidazole을 사용하여 $Zn^{2+}$와 $Co^{2+}$를 공침시켜 합성하고, 이를 $600^{\circ}C$에서 2시간 열처리하여 순수한 ZnO 나노입자와 Co가 도핑된 ZnO 나노입자를 합성했다. x가 < 0.05일 경우, 2-methylimidazole 링커가 $Zn^{2+}$ 및 $Co^{2+}$ 모두에 강하게 배향되어 균질한 Zn/Co ZIFs가 합성되었으며, 열처리를 통해 Co가 균일하게 도핑된 ZnO를 합성할 수 있었다. 반면, $x{\geq}0.05$일 때는 불균질한 Zn/Co ZIFs가 합성되었으며, 열처리 이후 $Co_3O_4$ 이차상이 형성되었다. 합성된 나노입자들에 대한 가스감응특성 평가 결과, 3 at%의 Co가 도핑된 ZnO 센서는 순수한 ZnO와는 달리 trimethylamine에 대해 고감도, 고선택적 가스감응특성을 나타냈다. 본 연구의 bimetallic ZIF 유도 산화물 나노복합체 합성방법은 고성능 가스센서를 설계하는데 활용될 수 있을 것으로 기대된다.

• 한국운동역학회지
• /
• 제25권2호
• /
• pp.191-198
• /
• 2015

Objective : The purpose of this study was to conduct biomechanical analysis of varying backpack loads on the lower limb movements during downhill walking over $-20^{\circ}$ ramp. Method : Thirteen male university students (age: $23.5{\pm}2.1yrs$, height: $175.7{\pm}4.6cm$, weight: $651.9{\pm}55.5N$) who have no musculoskeletal disorder were recruited as the subjects. Each subject walked over $20^{\circ}$ ramp with four different backpack weights (0%, 10%, 20% and 30% of body weight) in random order at a speed of $1.0{\pm}0.1m/s$. Five digital camcorders and two force plates were used to obtain 3-d data and kinetics of the lower extremity. For each trial being analyzed, five critical instants were identified from the video recordings. Ground reaction force, loading rate, decay rate, and resultant joint moment of the ankle and the knee were determined by the inverse dynamics analysis. For each dependent variable, one-way ANOVA with repeated measures was used to determine whether there were significant differences among four different backpack weight conditions (p<.05). When a significant difference was found, post hoc analyses were performed using the contrast procedure. Results : The results of this study showed that the medio-lateral GRFs at RHC in 20% and 30% body weight were significantly greater than the corresponding value in 0% of body weight. A consistent increase in the vertical GRFs as backpack loads increased was observed. The valgus joint movement of the knee at RTO in 30% body weight was significantly greater than the corresponding values in 0% and 10% body weight. The increased valgus moment of 30% body weight observed in this phase was associated with decelerating and stabilizing effects on the knee joint. The results also showed that the extension and valgus joint moments of the knee were systematically affected by the backpack load during downhill walking. Conclusion : Since downhill walking while carrying heavy external loads in a backpack may lead to excessive knee joint moment, damage can occur to the joint structures such as joint capsule and ligaments. Therefore, excessive repetitions of downhill walking should be avoided if the lower extremity is subjected to abnormally high levels of load over an extended period of time.

• Journal of Periodontal and Implant Science
• /
• 제23권1호
• /
• pp.109-126
• /
• 1993

Refractory periodontitis manifest progressive attachment loss in a rapid and unrelenting manner regardless of the type or frequency of therapy applied. The purpose of this study was ta evaluate the relation between the level of cytokines in GCF and periodontopathic microflora with disease activity of refractory periodontitis. Selection of patients with refractory periodontitis (7 males, 3 females) were made by long term clinical observation including conventional clinical history and parameters. Teeth that showed pocket depth greater than 6mm were selected as sample teeth. Subjects were examined at baseline and after 3 months. Prior to baseline test, individual acrylic stent was fabricated. Reference grooves were made on each sample tooth site. Pocket depth and attachment loss were measured by Florida Probe. Gingival index was measured at 4 sites each sample teeth. Disease activity was defined as attachment loss of ${\ge}$ 2.1mm, as determined by sequential probing and tolerance method. The pattern and amount of alveolar bone resorption was observed with quantitative digital subtraction image processing radiography. Morphological analysis of subgingival bacteria was taken by phase contrast microscopy. Predominant cultivable bacterial distribution and frequency were compared between disease-active and disease-inactive site using immunofluorescence microscopy and selective microbial culturing. Levels of $interleukin-l{\beta}$, 2, 4, 6 and $TNF-{\alpha}$ in GCF and blood serum sample were quantified by ELISA. In active sites, P. intermedia was significantly increased to compare with inactive site. $IL-1{\beta}$, IL-2, IL-6 and $TNF-{\alpha}$ in GCF were increased in active sites and IL-2 in serum was increased in active patients significantly. Alveolar bone loss in active site was correlated with $IL-1{\beta}$, IL-2 in GCF. And loss of attachment in active site was correlated with IL-2 in GCF. These results demonstrate that IL-2 in serum, $IL-1{\beta}$, IL-2, IL-6 and $TNF-{\alpha}$ in GCF, P, intermedia might be used as possible predictors of disease activity in refractory periodontitis before it is clinically expressed as attachment loss and quantitative alveolar bone change.

• 한국방사선학회논문지
• /
• 제12권5호
• /
• pp.631-636
• /
• 2018

기존의 자기공명영상검사에서 문제점으로 지적되어 왔던 위상부호화 방향에서의 긴 판독시간과 낮은 대역폭과 함께 기하학적 왜곡의 경향이 있어 이러한 영상왜곡을 감소하기 위한 여러 방법 중 FOCUS-DWI가 있다. 본 논문은 선택적인 위상 방향 및 슬라이스를 이용하는 FOCUS-DWI가 자기장 내 중심축에서 거리변화에 따른 인공물, 균일도를 기존의 Conventional-DWI와 비교하여 그에 대한 유용성을 확인하고자 하였다. 인공물 발생에 대한 결과는 Conventional-DWI 기법에서 불규칙적인 줄무늬 인공물이 발생하였는데 중심축에서 인공물의 발생이 심하게 나타났고, 영상의 겹침 정도가 급격하게 증가하였다. 하지만 FOCUS-DWI 기법은 줄무늬 모양의 인공물 발생이 나타나지 않았고 영상의 겹침 정도도 적게 나타났으며, 영역별 신호측정에 대한 균일도 결과는 중심축에서 거리의 변화에 관계없이 FOCUS-DWI가 훨씬 우수한 기법으로 나타났다. 결론적으로 FOCUS-DWI 기법은 인공물, 영상의 겹침 정도, 균일도 측정에서 Conventional-DWI 기법보다 우수한 결과를 보였고, 거리의 변화에 따른 두 기법에서는 차이가 없게 나타났다. 따라서 FOCUS-DWI 기법은 영상의 왜곡 정도가 적고 화질이 우수하여 임상에서 활용도가 높을 것이라 사료된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.643-646
• /
• 2005

The gas hydrate exploration using seismic reflection data, the detection of BSR(Bottom Simulating Reflector) on the seismic section is the most important work flow because the BSR have been interpreted as being formed at the base of a gas hydrate zone. Usually, BSR has some dominant qualitative characteristics on seismic section i.e. Wavelet phase reversal compare to sea bottom signal, Parallel layer with sea bottom, Strong amplitude, Masking phenomenon above the BSR, Cross bedding with other geological layer. Even though a BSR can be selected on seismic section with these guidance, it is not enough to conform as being true BSR. Some other available methods for verifying the BSR with reliable analysis quantitatively i.e. Interval velocity analysis, AVO(Amplitude Variation with Offset)analysis etc. Usually, AVO analysis can be divided by three main parts. The first part is AVO analysis, the second is AVO modeling and the last is AVO inversion. AVO analysis is unique method for detecting the free gas zone on seismic section directly. Therefore it can be a kind of useful analysis method for discriminating true BSR, which might arise from an Possion ratio contrast between high velocity layer, partially hydrated sediment and low velocity layer, water saturated gas sediment. During the AVO interpretation, as the AVO response can be changed depend upon the water saturation ratio, it is confused to discriminate the AVO response of gas layer from dry layer. In that case, the AVO modeling is necessary to generate synthetic seismogram comparing with real data. It can be available to make conclusions from correspondence or lack of correspondence between the two seismograms. AVO inversion process is the method for driving a geological model by iterative operation that the result ing synthetic seismogram matches to real data seismogram wi thin some tolerance level. AVO inversion is a topic of current research and for now there is no general consensus on how the process should be done or even whether is valid for standard seismic data. Unfortunately, there are no well log data acquired from gas hydrate exploration area in Korea. Instead of that data, well log data and seismic data acquired from gas sand area located nearby the gas hydrate exploration area is used to AVO analysis, As the results of AVO modeling, type III AVO anomaly confirmed on the gas sand layer. The Castagna's equation constant value for estimating the S-wave velocity are evaluated as A=0.86190, B=-3845.14431 respectively and water saturation ratio is $50\%$. To calculate the reflection coefficient of synthetic seismogram, the Zoeppritz equation is used. For AVO inversion process, the dataset provided by Hampson-Rushell CO. is used.

• 한국산업보건학회지
• /
• 제21권3호
• /
• pp.139-145
• /
• 2011

Objectives: This investigation is purposed to evaluate the airborne asbestos concentrations in the public buildings having asbestos containing materials(ACMs) in Seoul. Methods: The Seoul Metropolitan Government carried out an asbestos survey to the city-owned public buildings to identify the level of risk exposure, classified into low, moderate and high risk. To evaluate the airborne concentration of asbestos, 11 sampling sites in ten buildings based on the survey were selected. The air samples from the eleven sites were analyzed by Phase Contrast Microscopy(PCM) and Transmission Electron Microscopy (TEM), and compared the analytical results from the both. Results: 1. The airborne fiber concentrations by PCM were less than the detection limit($7f/mm^2$) in 9(82%) out of 11 sampling sites. The highest concentration was 0.0043 f/cc, but it was below the guideline value for indoor air quality(0.01 f/cc), proposed by the Ministry of Environment, Korea. 2. In two sampling sites, having moderate risk level, the chrysotile was identified and showed it's concentrations of 0.0102 s/cc and 0.0058 s/cc, less than $5{\mu}m$ lengths. 3. The ACMs identified in the two sampling sites were a packing material(65% of chrysotile) in mechanical area and a thermal system insulation(5% of chrysotile) in a boiler room. Having more possibility of asbestos emission in the mechanical area, it would be required to set up and carry out the asbestos management plan. Conclusions: Based on the result of this study, the airborne asbestos concentrations in the public buildings with ACMs were generally lower than the guideline value for indoor air quality. There are widespread concerns about the possible health risk resulting from the presence of airborne asbestos fibers in the public buildings. Most of the previous studies about airborne asbestos analysis in Korea were performed based on PCM method that asbestos and non-asbestos fibers are counted together. In the public and commercial buildings, having ACMs, it is suggested that the asbestos be analyzed by TEM method to identify asbestos due to concerns about asbestos exposure to workers and unspecified people.

• 동의생리병리학회지
• /
• 제18권4호
• /
• pp.1055-1060
• /
• 2004

Apoptosis is the ability of cells to self-destruct by the activation of an intrinsic cellular suicide program when the cells are no longer needed or when they are seriously damaged. Morphologically, apoptosis is characterized by the appearance of membrane blebbing, cell shrinkage, chromatin condensation, DNA cleavage, and the fragmentation of the cell membrane-bound apoptotic bodies. Siegesbeckia glabrescens Makino (Siegesbeckiae Herba, SG) has been widely used as treatments for arthritis, and fever, as well as detoxification properties. The present studies were undertaken to evaluate if SG has an anti-apoptotic property. Cell viability was measured by XTT and tryphan blue stain. Morphological characteristic of human aortic smooth muscle cells(HASMC) were visualized with a phase-contrast microscope. SG significantly reduced HASMC, but not human umbilical vein endothelial cell(HUVEC), viability in a dose-dependent manner. Confluent untreated cells at 24hrs showed normal morphology, flat with a uniform polygonal shape. SG-treated cells (0.5㎎/㎖) at 24hrs showed apoptotic morphology. Cells became irregular with elongated lamellipodia, and exhibited condensed chromatin in nuclei with occasional endoucleation. There was an increase in the number of apoptotic cells rounding-up and being detached from the substrate. TUNEL staining of SG-treated cells showed dark-brown stains in nuclei and cytosol. Caspases are central components of the machinery responsible for apoptosis and are generally divided into two categories; the initiator caspases, which include caspases-2,-8,-9, and -10, and the effector caspases, which include caspases-3,-6, and -7. SG decreased anti-caspase-3 protein expression, which means activation of caspases-3 activity. It has been reported that there is a link between NO formation and apoptosis. NO production was accelerated by SG treatment in HASMC. L-NNA, NOS inhibitor, inhibited SG-induced apoptosis. These results, therefore, indicated that both caspases-3 and NO production are involved in apoptosis in smooth muscle cells. According to these results, SG may have a potential effect in the treatment of hypertensive atherosclerosis.

• 대한수의학회지
• /
• 제32권3호
• /
• pp.435-450
• /
• 1992

To evaluate the fertilizing capacity of domestic animal spermatozoa by hamster test, semen were collected from 15 boars(Duroc, Landrace, and Yorkshire) and 2 mixed dogs which had been proved to be fertile in the past then, the semen were preserved in BWW medium at $4^{\circ}C$ or $18^{\circ}C$ for about 20 hours and coincubated with zona-free hamster ova for 5 hours. The ova were stained by lacmoid and examined under phase contrast microscope to investigate the rates of sperm binding to the ova, penetration and formation of a male pronucleus, and the numbers of both bound and penetrated sperm per ovum. Both the semen preserved at $18^{\circ}C$ for about 20 hours and that treated by swim up procedure showed considerably higher rates of sperm binding and penetration as well as higher number of penetrated sperm than that preserved at $4^{\circ}C$ for about 20 hours, respectively(p<0.01). Motility of boar sperm at insemination was from 40 to 90% and no difference in hamster test was obtained according to different degree of sperm motility. Abnormality in morphology of boar sperm at insemination was from 6 to 45% and no difference in hamster test was obtained according to different degree of sperm abnormality. The sperm concentrations of $7{\times}10^7$ and $7{\times}10^6$ showed considerably higher rates of sperm binding and penetration as well as higher number of bound sperm than that of $7{\times}10^4$ (p<0.01) along with the same higher results than that of $7{\times}10^5$(0<0.05), respectively. Boar sperm showed considerably higher rates of sperm binding and penetration as well as higher numbers of both bound and penetrated sperm than dog sperm, when both semen were treated by BWW＋heparin medium and swim up procedure, respectively. These results indicated that fertile boar sperm showed considerably lower rates in the results of hamster test, when preserved at $4^{\circ}C$ for about 20 hours and in lower concentration of sperm than when preserved at $18^{\circ}C$ for about 20 hours and in higher concentration of sperm, respectively, and at the same time considerably higher results than fertile dog sperm, consequently to prove that hamster test would be of great value in assaying the fertilizing capacity of boar sperm.

• 한국재료학회지
• /
• 제21권5호
• /
• pp.250-254
• /
• 2011

We have synthesized bluish-green, highly-efficient $BaSi_2O_2N_2:Eu^{2+}$ and $(Ba,Sr)Si_2O_2N_2:Eu^{2+}$ phosphors through a conventional solid state reaction method using metal carbonate, $Si_3N_4$, and $Eu_2O_3$ as raw materials. The X-ray diffraction (XRD) pattern of these phosphors revealed that a $BaSi_2O_2N_2$ single phase was obtained. The excitation and emission spectra showed typical broadband excitation and emission resulting from the 5d to 4f transition of $Eu^{2+}$. These phosphors absorb blue light at around 450 nm and emit bluish-green luminescence, with a peak wavelength at around 495 nm. From the results of an experiment involving Eu concentration quenching, the relative PL intensity was reduced dramatically for Eu = 0.033. A small substitution of Sr in place of Ba increased the relative emission intensity of the phosphor. We prepared several white LEDs through a combination of $BaSi_2O_2N_2:Eu^{2+}$, YAG:$Ce^{3+}$, and silicone resin with a blue InGaN-based LED. In the case of only the YAG:$Ce^{3+}$-converted LED, the color rendering index was 73.4 and the efficiency was 127 lm/W. In contrast, in the YAG:$Ce^{3+}$ and $BaSi_2O_2N_2:Eu^{2+}$-converted LED, two distinct emission bands from InGaN (450 nm) and the two phosphors (475-750 nm) are observed, and combine to give a spectrum that appears white to the naked eye. The range of the color rendering index and the efficiency were 79.7-81.2 and 117-128 lm/W, respectively. The increased values of the color rendering index indicate that the two phosphor-converted LEDs have improved bluish-green emission compared to the YAG:Ce-converted LED. As such, the $BaSi_2O_2N_2:Eu^{2+}$ phosphor is applicable to white high-rendered LEDs for solid state lighting.