• 한국분말재료학회지
• /
• 제27권6호
• /
• pp.498-502
• /
• 2020

We investigate the effects of Yb2O3 and calcium aluminosilicate (CAS) glass as sintering additives on the sintering behavior of AlN. The AlN specimens are sintered at temperatures between 1700℃ and 1900℃ for 2 h in a nitrogen atmosphere. When the Yb2O3 content is low (within 3 wt.%), an isolated shape of secondary phase is observed at the AlN grain boundary. In contrast, when 3 wt.% Yb2O3 and 1 wt.% CAS glass are added, a continuous secondary phase is formed at the AlN grain boundary. The thermal conductivity decreases when the CAS glass is added, but the sintering density does not decrease. In particular, when 10 wt.% Yb2O3 and 1 wt.% CAS glass are added to AlN, the flexural strength is the highest, at 463 MPa. These results are considered to be influenced by changes in the microstructure of the secondary phase of AlN.

• 신재생에너지
• /
• 제18권2호
• /
• pp.40-49
• /
• 2022

In this study, the phase and electrochemical properties of Co and Ti substituted layered perovskites SmBaCo_2-xTi_xO_5+d (x=0.5, 0.7, 1.0, 1.1, 1.3, and 1.5) were analyzed, and their application as electrodes in solid oxide fuel cells (SOFCs) were evaluated. After calcination at 1300℃ for 6 h, a single phase was observed for two compositions of the SmBaCo_2-xTi_xO_5+d oxide system, SmBaCoTiO_5+d (x=1.0) and SmBaCo_0.9Ti_1.1O_5+d (x=1.1). However, the phases of SmBaCoTiO_5+d (SBCTO) and SmTiO₃ coexisted for compositions with x≥1.3 (Ti content). In contrast, for compositions of x≤0.7, the SmBaCo₂O_5+d phase was observed instead of the SmTiO₃ phase. To evaluate the applicability of these materials as SOFC electrodes, the electrical conductivities were measured under various atmospheres (air, N₂, and H₂). SBCTO exhibited stable semi-conductor electrical conductivity behavior in an air and N₂ atmosphere. However, SBCTO showed insulator behavior at temperatures above 600℃ in a H₂ atmosphere. Therefore, SBCTO may only be used as cathode materials. Moreover, SBCTO had an area specific resistance (ASR) value of 0.140 Ω·cm² at 750℃.

• 대한방사선기술학회지:방사선기술과학
• /
• 제30권4호
• /
• pp.381-389
• /
• 2007

본 연구는 전산화단층촬영 검사의 방사선 선량에 관하여 조사하고자 하였다. 이를 위하여 문헌고찰을 실시하였으며, 여러 기관으로부터 자료를 수집하였고, 각 의료기관의 CT장비에서 선량을 측정하였으며, 병원에서 시행하고 있는 Protocol에 입각하여 피폭선량을 계산하였다. 이 연구의 주요 결과는 다음과 같다. 1. 두부팬텀을 이용하여 측정된 100 mAs 당 $CTDI_W$ 값은 4 slice MDCT 장비가 24.20 mGy로 가장 높았다. 장비의 세대별 구분에 따른 $CTDI_W$ 값은 통계적으로 유의한 차이가 있었다(p < 0.01). 2. 복부팬텀을 이용하여 측정한 100 mAs 당 $CTDI_W$ 값은 4 slice MDCT 장비가 13.58mGy로 가장 높았으며, $CTDI_W$ 값은 장비 세대별로 통계적으로 유의한 차이가 있었다(p<0.01). 3. 두부검사에서의 환자선량은 조영제를 사용하지 않을 경우에 가장 높은 장비는 16 slice MDCT로 $818.83\;mGy{\cdot}cm$이었다(p < 0.05). 조영제를 사용하는 경우는 4 slice MDCT 장비에서 $1460.77\;mGy{\cdot}cm$로 가장 높게 측정되었으며, 평균 환자선량은 장비 종류 사이에 유의한 차이가 있었다(p < 0.1). 4. 흉부검사에서의 환자선량은 조영제를 사용하지 않을 경우에 16 slice MDCT에서 평균은 $521.63\;mGy{\cdot}cm$로 가장 높았으며, 장비종류별로 유의한 차이가 있었다(p < 0.05). 조영제를 사용하는 경우에 8 slice MDCT 장비에서의 환자선량이 평균 $1,174.70\;mGy{\cdot}cm$로 가장 높았으며, 장비별로 평균 환자선량에는 통계적으로 유의한 차이는 없었다. 5. 복부-골반검사에서 조영제를 사용하지 않을 경우에 환자선량이 가장 높은 장비는 16 slice MDCT 장비로 평균은 $856.27\;mGy{\cdot}cm$이었으며, 평균 환자선량은 장비 사이에 유의한 차이가 있었다(p < 0.05). 조영제를 사용하는 경우 환자선량이 가장 높은 장비는 16 slice MDCT로 평균 $1,720.64\;mGy{\cdot}cm$이었다. 평균 환자선량은 장비 사이에 유의한 차이가 있었다(p < 0.05). 6. 간 검사에서 조영제를 사용하지 않을 경우에 환자선량이 가장 높은 장비는 8 slice MDCT로 평균 환자선량은 $612.07\;mGy{\cdot}cm$이었고, 환자선량은 장비사이에 유의한 차이가 있었다(p < 0.05). 조영제를 사용하는 경우의 환자선량은 8 slice MDCT 장비의 평균이 $2,197.93\;mGy{\cdot}cm$로 가장 높았으며, 장비사이에 유의한 차이가 있었다(p < 0.1). 조사대상 의료기관의 76.2%에서 조영제를 투여하는 검사의 반복횟수가 $3{\sim}4$회로 방사선피폭에 의한 위험이 있을 것으로 추정되었다.

• 한국의학물리학회지:의학물리
• /
• 제23권3호
• /
• pp.177-187
• /
• 2012

자기공명 혈관조영술은 혈관협착, 동맥류, 동정맥기형 등의 혈관질환 진단에 널리 사용되고 있다. 특히 위상대조도 자기공명 혈관조영술은 조영제를 사용하지 않는 자기공명 혈관조영술로서 혈관의 해부학적인 정보를 제공함과 동시에 혈류 속도측정이 가능하다. 본 연구에서는 저자장 자기공명영상 시스템에 적합한 2차원 및 3차원 위상대조도 혈관조영술의 펄스열을 개발하여 유속팬텀과 정상인의 뇌에 적용한 후 획득한 혈관영상과 위상분석을 통한 속도측정을 바탕으로 저자장 자기공명영상 시스템에서의 위상대조도 혈관조영술의 유용성을 평가하고자 한다. 2차원 및 3차원 위상대조도 혈관조영술을 제작된 유속팬텀과 인체 내에 적용하여 상시상 정맥동, 곧은 정맥동 및 두 혈관의 합류지점에 대한 속도측정을 시행하였다. 결과로서 2차원 위상대조도 혈관조영술의 사용은 큰 혈관에 대해서는 높은 가시도를 나타내지만, 작은 혈관에 대한 가시도는 상대적으로 저하됨을 확인할 수 있었다. 3차원 위상대조도 혈관조영술을 사용한 혈관영상은 2D PC MRA 영상에 비해 큰 혈관은 물론이고 작은 혈관에 대한 가시도가 향상되었으나 작은 혈관에서 영상의 신호가 불균일하여 작은 혈관의 진단에 사용하기에는 적합하지 않았다. 한편 2차원 위상대조도 혈관조영술을 통한 영상에서 큰 혈관의 가시도는 혈류속도를 측정하기에 충분했다. 측정된 결과는 상시상 정맥동의 경우 $25.46{\pm}0.73cm/sec$, 곧은 정맥동의 경우 $24.02{\pm}0.34cm/sec$, 상시상 정맥동과 곧은 정맥동의 합류지점의 경우 $26.15{\pm}1.50cm/sec$으로 나타났으며 이는 앞선 연구결과에서 알려진 전체 심장운동주기를 고려한 정상인들의 각 해당 부위별 혈류속도의 오차범위 내에 포함되는 좋은 결과를 나타내었다. 앞선 결과들을 토대로 본 연구는 현재 국내에서 제작하여 보급중인 저자장 자기공명영상 시스템에서 위상대조도 혈류영상화 기법의 적용 및 응용 가능성을 보여주고 있으며 이를 실용화하기 위한 중요한 기초자료를 제공할 수 있을 것이다.

• 공업화학
• /
• 제8권3호
• /
• pp.357-364
• /
• 1997

본 연구에서는 비이온성 계면활성제를 사용하여 오염 토양 내의 탄화수소 유기물을 정화하는 데 있어서 필수적인 최적의 비이온성 계면활성제에 대한 조건을 도출하고자 하였다. 이를 위하여 비이온성 계면활성제, 물, 탄화수소로 이루어진 3성분계에 대하여 특정 탄화수소 유기물이 계면활성제에 의하여 최대로 가용화될 수 있는 조건을 계면활성제 친수성 기의 변화에 따라 측정하고 비이온성 계면활성제 용액과 탄화수소 사이의 계면장력을 측정하였다. 이런 결과들을 바탕으로 실제 회분식 sur-factant washing 실험을 수행한 결과 탄화수소의 유기물은 PIT(Phase Inversion Temperature)에서 생성되는 middle-phase microemulsion에 최대로 가용화될 수 있었으며, 비이온성 계면활성제 $C_{12}E_5(C_{12}H_{25}O(CH_2CH_2O)_5H)$를 사용했을 경우 $C_{12}E_5$, 물, n-hexadecane으로 이루어진 3성분 계의 PIT에 해당하는 $52^{\circ}C$에서 n-hexadecane이 73.4% 제거되었으며, 반면에 PIT보다 낮은 $25^{\circ}C$와 PIT보다 높은 $60^{\circ}C$에서의 n-hexadecane 제거율은 각각 57.1%, 57.0%를 나타내었다. 이와 같이 PIT조건에서 n-hexadecane이 최대로 가용화되는 것은 계의 소수성-친수성이 균형을 이룸으로 인하여 유기물이 가용화되는 속도가 매우 빠를 뿐 아니라 middle-phase microemulsion과 excess oil phase 사이에 존재하는 $10^{-2}{\sim}10^{-3}dyne/cm$의 매우 낮은 계면장력때문인 것을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.421-421
• /
• 2006

The light and energy-efficiency of classical liquid crystal displays is notoriously poor due to the use of absorption-based linear polarisers and colour filters. For instance, the light efficiency of PVAL polarisers is typically between 40 and 45 % and the colour filters have a typical efficiency below 35 % which results in a total light and energy-efficiency of the display below 10 %. In the past, a variety of polarizers were developed with an enhanced efficiency in generating linearly polarized light. Typically, these polarizers are based on the polarisationselective reflection, scattering or refraction of light i.e. one polarisation direction of light is directly transmitted to the LCD/viewer and the other polarization direction of light is depolarised and recycled which results in a typical efficiency for generating linearly polarized light of 70-85 %. Also, special colour filters have been proposed based on chiral-nematic reactive mesogens which increase the efficiency of generating colour. Despite the enormous progress in this field, a need persists for improved methods for generating polarized light and colour based on low cost optical components with a high efficiency. Here, the use of holographic phase gratings is reported for the generation of polarized light and colour. The phase grating are recorded in a photopolymer which is coated onto a backor frontlight for LCDs. Typically the recording is performed in the transmisson mode or in the waveguiding mode and slanted phase gratings are generated with their refractive index modulation at an angle between 20o and 45o with the normal of the substrate. It is shown that phase gratings with a high refractive index modulation and a high efficiency can be generated by a proper selection of the photopolymer and illumination conditions. These phase gratings coupleout linearly polarized light with a high contrast (> 100) and the light is directed directly to the LCD/viewer without the need for redirection foils. Dependent on the type of phase grating, the different colours are coupled-out at a slightly different angle which potentially increases the efficiency of classical colour filters. Moreover, the phase gratings are completely transparent in direct view which opens the possibility to use them in frontlights for LCDs. Holographic polarization gratings posses a periodic pattern in the polarization state of light (and not in the intensity of light). A periodic pattern in the polarization direction of linearly polarized light is obtained upon interference of two circularly polarized laser beams. In the second part of the lecture, it is shown that these periodic polarization patterns can be recorded in a linear photo-polymerizable polymer (LPP) and that such an alignment layer induces a period rotation in the director of (reactive and non-reactive) liquid crystals. By a proper design, optical components can be produced with only first order diffraction and with a very high efficiency (>0.98). It is shown that these diffraction gratings are potentially useful in projection displays with a high brightness and energy efficiency

• Clinical and Experimental Reproductive Medicine
• /
• 제25권2호
• /
• pp.153-160
• /
• 1998

The objective of this retrospective study was to evaluate whether the transvaginal ultrasonographic analysis of endometrial pattern and thickness could predict the stage of menstrual cycle. Endometrial pattern and thickness were observed in those patients receiving infertility work up from April, 1994 to July, 1998 at Seoul National University Hospital. The study group was 185 patients with normal regular menstrual cycles. Among them, 44 patients received endometrial biopsy, and the date of endometrium was compared with the observed endometrial pattern and thickness. The observed endometrial pattern was presence or absence of central cavity echogenicity, triple line sign, endometrial hypoechogenicity, ring sign, endometrial hyperechogenicity and posterior acoustic sonic enhancement. The results were as follows; Central cavity echogenicity was seen throughout menstrual cycle. Triple line sign was observed in 81.1% of patients during early secretory phase. However, in mid to late secretory phase, triple line sign was appeared in only 6.8%. The percentage of positive endometrial hypoechogenicity was highest in early secretory phase. In contrast to hypoechogenicity, positive endometrial hyperechogenicty was highest in mid to late secretory phase. Ring sign was observed in 73.5% of the patients during early secretory phase with peak incidence. Posterior acoustic enhancement was seen in 72.7% of the patients during late secretory phase. The sensitivity and specificity of being a secretory phase if the patients showed hyperechogenic endometrium, were 84.2%, 83.3% respectively. The sensitivity and specificity of being a secretory phase if the patients showed posterior acoustic enhancement were 93.8%, 58.3% respectively. Endometrial thickness was not correlated with endometrial dating. In conclusion, transvaginal ultrasonographical delineation of the endometrial pattern might be useful tool in predicting endometrial status during normal menstrual cycle. But, endometrial thickness could not predict the endometrial dating.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.59-69
• /
• 2000

The characteristics of liquid crystal polymer composite(LCPC) films are possessed of large-area and flexible display, polarizer free, high contrast, wide angle of visual filed and high responsiveness. It is well known that the LCPC films consisting of a continuous LC phase embeded in a three-dimentional network of polymer matrix are formed by photopolymerization-induced phase separation. In this study, we have investigated the point that both liquid crystals and polymer having different properties have to coexiste as composed films. The purpose of this study has been the development of new application with liquid crystals and UV-curable monomers. In the results abtained on the miscibility of nematic liquid crystal and UV-curable resins, difunctional monomer HX-620 turned out to shows the best. From the results abtained on structures, electro-optical properties and dynamic visocoelasticity for LCPC films, the best mixing ratio of monomer to LC mixture were 3/7(photoinitiator; 4wt%) by weight, and this ratio has been provided the most thermal stability for LCPC films. In the results abtained on structure and discoloration properties of LCPC films, it has been demonstrated that consiste of a 8:2 mixture of chiral nematic liquid crystal and HX-620 has the greatest domain and it was the best discoloration.

• Coupled systems mechanics
• /
• 제1권2호
• /
• pp.205-217
• /
• 2012

A smart beam made of magneto-electro-elastic (MEE) material having piezoelectric phase and piezomagnetic phase, shows the coupling between magnetic, electric, thermal and mechanical under thermal environment. Product properties such as pyroelectric and pyromagnetic are generated in this MEE material under thermal environment. Recently studies have been published on the product properties (pyroelectric and pyromagnetic) for magneto-electro-thermo-elastic smart composite. Hence, the magneto-electro-elastic beam with different volume fractions, investigated under uniform temperature rise is the main aim of this paper, to study the influence of product properties on clamped-free boundary condition, using finite element procedures. The finite element beam is modeled using eight node 3D brick element with five nodal degrees of freedom viz. displacements in the x, y and z directions and electric and magnetic potentials. It is found that a significant increase in electric potential observed at volume fraction of $BaTiO_3$, $v_f$ = 0.2 due to pyroelectric effect. In-contrast, the displacements and stresses are not much affected.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.315-326
• /
• 2010

This study examined the overlapping resonances in the systems involving 1 open and 2 closed channels using the phase-shifted version of multichannel quantum-defect theory (MQDT). The results showed that 21 patterns for the q reversals in the autoionization spectra are possible depending on the relative arrangements of the two simple poles and roots of the quadratic equations. Complete cases could be generated easily using the q zero planes determined using only 3 asymmetric spectral line profile indices. The transition of the spectra of the coarse interloper Rydberg series from the lines into a structured continuum by being dispersed onto the entire Rydberg series was found. The overall behavior of the time delays was found to be governed by the dense Rydberg series, which is quite different from the one of the autoionization cross sections that is governed by an interloper, indicating that different dynamics prevail for them. This is in contrast to the two channel system where both quantities behave similarly. The dynamics obtained in the presence of overlapping resonances is as follows. The absorption process is instant and dominated by a transition to the interloper line. This process is followed by rapid leakage into the dense Rydberg series, which has a longer residence time before ionization than that of the interloper state. This is because the orbiting period is proportional to $\upsilon^3$ so that an excited electron has a shorter lifetime in the interloper state belonging to a lower member of the Rydberg series.