• Journal of Periodontal and Implant Science
• /
• v.31 no.4
• /
• pp.661-668
• /
• 2001

Anti-P. gingivalis immune sera were obtained from mice immunized with either P. gingivalis alone, or F. nucleaturm followed by P. gingivalis. Two groups of immune sera were examined for binding capacity to P. gingivalis biofilm by confocal laser scanning microscope, Antibody avidity index was also determined for each immune sera. The results indicated that prior immunization of mice with F. nucleaturm impaired P. gingivalis-specific immune sera in binding capacity to biofilm and antibody avidity to P. gingivalis. Elevated antibody responses in patients with destructive periodontal disease has often been related to suboptimal level of protective antibody $(opsonophagocytosis)^{1-3)}$ while post-immune sera obtained with experimental animals using a single periodontal pathogen demonstrated satisfactory levels of protective function against the homologous bacterial $challenge^{4,5)}$.The reason is unclear why elevated IgG responses in periodontal patients to periodontal pathogens do not necessarily reflect their protective function. Such an immune deviation might be derived from the fact that destructive periodontal disease is cumulative result of immunopathologic processes responding to an array of different colonizing microorganisms sequentially infecting in the subgingival environmental niche. Fusobacterium nucleaturm is one of the key pathogens in gingivitis, in the transitional phase of conversion of gingivitis into destructive periodontitk, and in adult $periodontitis^{6-8)}$. It also plays a central role in coaggregation with other important microbial species in subgingival $area^{6,9,10)}$ as well as in $biofilm^{11)}$, especially with Porphyromonas gingjvalis in synergism of virulence in human periodontal disease or in animal $models^{12-14)}$. This organism has also been reported to have immune modulating activity for secondary immune response to Actinobacillus $actinomycetemcomitans^{15)}$. It is presumed that sequential colonization and intermicrobial coaggregation between intermediate and late colonizers could potentially modulate the immune responses and development of specific T cell phenotypes in periodontal lesions. We have recently demonstrated the skewed polarization of P. gingivalis-specific helper T cell clones in mice immunized with F. nucleaturm followed by P. $gingivalis.^{16)}$. Consequently F. nucleaturm may initially prime the immune cells and modify their responses to the successive organism, P. gingivalis. This could explain why one frequently observes non-protective serum antibodies to P. gingivalis in periodontal patients in contrast with those obtained from animals that were immunized with $P.gingivalis\;alone^{17)}$. The present study was performed to investigate the immune modulating effect of F. nucleatum on serum binding to experimental biofilms and the avidity of anti-P. gingivalis antibody.

• Parasites, Hosts and Diseases
• /
• v.23 no.2
• /
• pp.293-299
• /
• 1985

This study is to verify the protective ability against experimental Naegleria meningoencephalitis by immunization with Naegleria fowleri in mice. Naegleria fewleri, strain 0359, and Naegleria gruberi, strain EGB, were used in this study, and cultured in CGVS medium akenically. Inbred BALB/C mice, weighing about 20g, were immunized by three intraperitoneal injection of $1{\times}10^6$ N. fowleri trophozoites at the interval of one week. This N. fowleri trophozoites antigen was fixed with 5% formaldehyde. N. fowleri trophozoites from culture were homogenized with soiicator at $4^{\circ}C$ as monitored by phase contrast microscopy, and their membrane and cell content preparations were made for the immunization of mice. Their inoculation dose in volume was equivalent to the $1{\times}10^6$ trophozoites in each injection for immunization. And N. gruberi trophosoites, whieh was fixed with 5% formaldehyde, were also used for immunisation. Mice were inoculated intranasally with $5{\times}10^4$ N. fowleri trophozoites in a 511 suspension under anesthesia by as intraperitoneal injection of about 1 mg secobarbiturate. Nervousness, rotation or sluggish behaviour were observed in the mice which were infected with N. fewleri. Necrotic lesion was demonstrated in the anterior portion of brain, especially in the olfactory lobe. The inflammatory cell infiltration with numerous H. fowleri trophozoites was noticed. This pathological changes were more extensive in the control than in the experimental groups. Mice were dead due to experimental primary amoebic meningoencephalitis that developed between 8 days and 23 days after inoculation. Mortality rate of the mice was low in the immunized experimental group. Mean survival time, which is the survival duration of mice from the infection to death, was prolonged significantly in the immunized mice except in the mice immunized with JV, fowleri membrane. Even in the mice immunized with N. gruberi, survival time was delayed. In summary, the effectiveness of immunization is demonstrated in terms of protective immunity against Naegleria meningoencephalitis in mice.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.248-253
• /
• 2005

We designed and fabricated a compact multi-mode interference (MMI) wavelength demultiplexer using the concept of 'Improved Quasi-State' modes. The output power and extinction ratio were improved by utilizing modal phase error which is specially occurred in low-index contrast. For a designed demultiplexer, the mode propagation analysis with effective index approximation shows significant improvement of extinction ratio to -25 dB for both $1.31{\mu}m\;and\;1.51{\mu}m$ wavelength region and the split-length was reduced about 1/5 of other MMI devices. The fabricated device shows successful characteristics for both 1.31 and $1.55{\mu}m$ wavelengths. These results demonstrate the potential of low-index materials system and the embossing process for photonic integrated circuits.

• Korean Journal of Materials Research
• /
• v.10 no.12
• /
• pp.853-863
• /
• 2000

In this study, a new UBM materials system for solder flip chip interconnection of Cu pads were investigated using electroless copper (E-Cu) and electroless nickel (E-Ni) plating method. The interfacial reaction between several UBM structures and Sn-36Pb-2Ag solder and its effect on solder bump joint mechanical reliability were investigated to optimife the UBM materials design for solder bump on Cu pads. Fer the E-Cu UBM, continuous coarse scallop-like $Cu_{6}$ $Sn_{5}$ , intermetallic compound (IMC) was formed at the solder/E-Cu interface, and bump fracture occurred this interface under relative small load. In contrast, Fer the E-Ni/E-Cu UBM, it was observed that E-Ni effectively limited the growth of IMC at the interface, and the Polygonal $Ni_3$$Sn_4$ IMC was formed because of crystallographic mismatch between monoclinic $Ni_3$$Sn_4$ and amorphous E-Ni phase. Consequently, relatively higher bump adhesion strength was observed at E-Ni/E-Cu UBM than E-Cu UBM. As a result, it was fecund that E-Ni/E-Cu UBM material system was a better choice for solder flip chip interconnection on CU PadS.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.102-106
• /
• 2006

Magnetic nanoparticles can be used for a variety of biomedical applications. They can be used in the targeted delivery of therapeutic agents in vivo, in the hyperthermic treatment of cancers. in magnetic resonance (MR) imaging as contrast agents and in the biomagnetic separations of biomolecules. We have synthesized magnetite $(Fe_3O_4)$ nanoparticles using chemical coprecipitation technique with sodium oleate as surfactant. Nanoparticle size can be varied from 2 to 8nm by controlling the sodium oleate concentration. Magnetite phase nanoparticles could be observed from X-ray diffraction. Magnetic colloid suspensions containing particles with sodium oleate and chitosan have been prepared. Nanoparticles, both oleate-coated and chitosan-coated, have been characterized by several techniques. Atomic farce microscope (AFM) was used to image the coated nanoparticles. Magnetic hysteresis measurement were performed using a superconducting quantum interference device (SQUID) magnetometer at room temperature to investigate the magnetic properties of the magnetite nanoparticles. The SQUID measurements revealed superparamagnetism of nanoparticles.

• Journal of Veterinary Clinics
• /
• v.29 no.2
• /
• pp.148-153
• /
• 2012

Atrial natriuretic peptide (ANP) is associated with the variety of disorders of myocardial function. The effect, however, of myocardial infarction (MI) on ANP has not been fully described. Thus, this study investigated the effect of experimental MI, induced by left coronary artery ligation, on ANP secretion. Male Sprague-Dawley rats aged 60 d underwent ligation of the left anterior descending coronary artery to induce MI and were compared with a group that underwent a sham operation. Rats of sham operation had a similar procedure without having the suture tightened around the coronary artery. Animals were sacrificed at 1, 3, 6, 12, and 18 h or 1, 3, 5, 7, 14, and 30 d after the procedure. MI size was assessed by planimetry and perimetry, and plasma ANP levels were determined by radioimmunoassay. Mean infarct size was 39.6-44.5% of the left ventricle after coronary occlusion in experimental groups. No significant differences were observed in infarct size among groups. In contrast, the concentration of plasma ANP was significantly higher at 1, 3, 6, 12, 18, and 24 h after left coronary artery ligation than in sham animals. This parameter, however, did not differ significantly at 3, 5, 7, 14, and 30 d after ligation compared with sham-ligated controls. These results demonstrate that plasma ANP levels are markedly increased in the early phase of MI in the male rat and can be a useful biomarker for diagnosis in acute MI.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.35-43
• /
• 2013

Nowadays the widely used media in architecture include visualizations, animations and three-dimensional models. 3D digital methods using active CAM(Computer Aided Manufacturing) and CNC(Computerized Numerical Control) imaging have been developed for accurate shape and 3D measurements in freeform buildings. In contrast to a conventional building using auto CAD system and others, the proposed digital optimization method is based on a combination of 3D numerical data and parametric 3D model for design and construction. The objective of this paper is therefore to present digital optimization process for constructability of freeform building. The method can be useful in the effective implementation of an error-proofing process of freeform building during design and construction phase. 3D digital coordinate data can be used effectively to identify correct size of structural and finish members and installation location of each members in construction field. In addition, architects, engineers and contractors can evaluate design, materials, constructability and identify error-proofing opportunities. Other project participants can also include representatives from all levels of management, departments as well as workers and key subcontractors' personnel, if necessary. The 3D digital optimization process is therefore appropriate to serious variations in freeform shape. For future study, the developed digital optimization method is necessary to be carried out to verify the robustness and accuracy for constructability in construction field.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.435-439
• /
• 1995

Some characteristics and pathogenicity of Hyphantria cunea nuclear polyhedrosis virus (HcNPV), a potential microbial pesticide was studied. H. cunea NPV replicated in the nucleus of S. frugiperda cells cultured in the TNMFH medium. In case of virus infected cell, prepolyhedra formation was observed at 24hrs post-infection. At 48 hrs post-infection, Most of the infected cell contained many mature polyhedra which were released into culture media 72 hrs post-infection, with the cells grown in suspension culture, pH of the culture medium increased during the virus replication: the pH of fresh medium was 6.35 and rose to 6.77 within 120 hrs. Polyhedra formed a band in linear density gradient of sucrose by centrifugation, which co-sedimented with $50{\sim}55%$ sucrose. The shape of the purified polyhedra was mostly tetragonal hexahedron and its size was about $2.5{\mu}m$. Electron microscopy and phase contrast microscopy showed that many bundled nucleocapsids were occluded in mature polyhedra at 48 hrs post infection. H. cunea larvae infected with NPV showed a higher motality in the second and third instar than in the fourth instar. Death rate of H. cunea larvae in the second and third instar fed with leaves coated with $1.5{\times}10^{9}{\sim}l.5{\times}10^{7}PIBs/ml$ reached more than 90%.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.771-776
• /
• 2005

In recent days, there is much interest in the biocidal activity of silver since silver is known to be safe and effective as disinfectant and biocidal material against coliforms and viruses. In particular, nano silted silver particles which can be used as effective biocidal material received more attention. Accordingly, it is important to investigate antimicrobial activity and mechanism of nano sized silver particles prepared in a cost-effective manner. In this study, nano sized silver particles were prepared via photoreduction of a silver salt ($AgNO_3$) in the bulk phase of $PEO_{20}-PPO_{70}-PEO_{20}$ (Pluronic 123) block copolymer The antimicrobial efficacy of silver nano particles against E. coli was investigated and compared with that of silver ion as the concentration of silver nano particles, pH ($5.6{\sim}8.2$), temperature ($4^{\circ}C{\sim}35^{\circ}C$) varied in aqueous system. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) was used to examine the nature of damaged microorganism with nano sized silver particles and silver ion. This study showed that antimicrobial efficacy of silver nano particles was approximately one twentieth than that of silver ion. It was more biocidal at higher pH in contrast with silver ion. In addition, nano silver particles was demonstrated to disrupt the outer membrane of E. coli, subsequently causing their aggregation. On the other hand, silver ion diffused into the cell damaging the cytoplasmic membrane without disrupting the outer membrane of E. coli.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.3
• /
• pp.247-255
• /
• 2016

In order to select a strain that forms a Biocellulose (BC), strain producing acetic acid was selected from commercially available kombucha. Through SM broth it was confirmed that the strain is a gram negative bacteria in the form of rods having no motility through a phase contrast microscope. The result of phylogenetic inference analysis based on 16S rDNA sequence analysis for the identification of strains was most closely related to Gluconobacter uchimurae (G. uchimurae) and was named G. uchimurae GYS15 strain. The strain showed the highest degree of growth when cultured for 14 days under the conditions of pH 5 and $25^{\circ}C$. Moreover, it showed the highest degree of growth in a Glucose addition disaccharide as the optimum carbon source sucrose and fructose. Also, 0.5% NaCl, upon the addition of Malto extract, showed the highest degree of growth. Based on investigation by the optimum growth conditions to confirm the physical properties of BC obtained by culturing G. uchimurae GYS15 strains. The surface structure was observed through an scanning electron microscope (SEM) showed a high networks structure. It until $8.6{\pm}0.38$ times when the water holding capacity is re-absorbed and re-absorbed holding oil up to $6.6{\pm}0.51$ times confirmed. In conclusion, using these material properties, it was possible to confirm the possibility of a variety of cosmetic materials and mask pack materials.