• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2002.05a
• /
• pp.82-89
• /
• 2002

Acid dairy drinks(ADD) are a worldwide product existing in many variations: fruit milk drinks, yogurt drinks, soy milk, butter milk, whey drinks and kefir etc. These drinks are marketed with different shelf lives depending on processing: -Short shelf life(maximum 3 weeks, cold storage) - Long shelf life(2 to 9 months, pasteurized, sterilized or retorted) Acidic protein drinks tend to a separation or destabilization process in the absence of stabilizing system during the shelf life of the ADD. A phase separation results in sedimentation of large particles at the bottom of the package and/or the formation of a serum layer at the top(whey off). These beverages are usually composed of an acid dairy phase (fermented base)or a natural base(milk, soymilk etc.)with an acidic medium (fruit phase: pulp, fruit concentrate etc.) which can be flavored. Sugar and stabilizers are added. It has been proved since the late 1950's that adding high methoxy pectin (HM pectin)to acid milk drinks is the best way to prevent the formation of a sediment and/or the whey off. In this presentation, we explain about stabilization mechanism of ADD induced by pectin. Applications and market trend of ADD in Asia and Europe are explained.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.71-75
• /
• 2004

The beam direction of the 3-D phase array ship-borne radar is changed according to ship motion such as a pitch and roll variation. To align beam direction, under this circumstance, mechanical or electronic stabilization should be adopted. Considering weight and volume of radar, method of electronic stabilization is recommended. In this paper, method of electronic stabilization is proposed and the results are shown by computer simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.44-49
• /
• 2003

In case of an extrinsic Fabry-Perot interferometric sensor, the phase compensating technique is particularly necessary in applying the interferometer to detecting acoustic emission signals because of signal-fading problems. The technique makes it possible to maintain the phase at the quadrature point. In this paper, we developed the stabilization control sensor system that is composed of a broadband light source, a tunable Fabry-Perot (F-P) filter and a control-circuit board. A tension test of a composite specimen was performed to verify if the developed system could compensate the phase change induced from the tension strain and keep the phase at the quadrature point.

• Journal of architectural history
• /
• v.23 no.2
• /
• pp.39-52
• /
• 2014

This study researched changes over time regarding the location and spatial characteristics of modern meteorological stations, and examined the characteristics of modern meteorological station construction using the location and spatial characteristics of the Busan Meteorological Station. First, meteorological stations were located in port areas, and then moved to high altitude areas for stable meteorological observation beginning in the transition phase. Here, office buildings and residences were joined, but were separated due to the increase in functions from the stabilization phase. Second, as for spatial composition, in the establishment phase, existing buildings were used, and the scale of newly constructed buildings differed according to time and area. However, after the Japan-Korea Annexation, with increased funds and increased observation equipment, floor plans subdivided by function started to appear. In the stabilization phase, space was subdivided with redundancy due to the increase in functions. In the wartime transition phase, '一' shaped floor plans with redundancy became the norm. Meanwhile, the location of the maritime customs where the first meteorological observations took place after the opening of the ports, and the location and construction of the Busan Temporary Observatory built in the meteorological observation transition phase (1905) were investigated. Also, through the investigation of the Busan Meteorological Observatory, newly constructed before 1934, the location and spatial characteristics of modern era meteorological observatories were studied.

• Journal of Information Technology Services
• /
• v.4 no.2
• /
• pp.1-22
• /
• 2005

The object of this study is to elicit major success factors along with the phases of implementing the BPR in case of public corporations. To obtain the goal of this research, (1) this study reviews and integrates the major previous BPR studies and shows critical success factors of implementing BPR projects coincided with the characteristics of the public organizations. (2) This study has analyzed and arranged the details of BPR projects of public corporations in South Korea through the literature survey, the questionnaire and the interview. (3) This study classifies 40 critical success factors which were identified in existing studies into ones belonging to 3 phases of BPR projects implementation: Introduction Phase, Execution Phase and Stabilization Phase. (4) This study has tested the relation between critical success factors on each stage of BPR projects implementation and the performance variables. It has proven that there is the statistically significant correlation between the success factors and the performance. The findings of this study are thought not only to be useful as a practical guideline in carrying out BPR project Implementation but also to provide significant basis for constructing the theoretical framework of effective BPR project implementation strategy.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.2
• /
• pp.41-48
• /
• 1997

Nowadays, EMI emission characteristics, which causes harmful effect on power distribution system and other equipments, have been studied in field of Power electronics, vigoriously. So, in this paper, the conducted EMI emission is measured and compared for 3-phase diode rectifier and PWM converter according to switching frequency variation and current control method change using LISN(Line Impedance Stabilization Network) and spectrum analyzer.

• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.362-365
• /
• 1997

This paper presents a new optical phase stabilization technique for interferometric such as Mach-Zehnder interferometers or Homodyne detectors. The proposed technique can lock such interferometric systems in their maximum/minimum optical outputs without using a dither signal. The phase control scheme is a modified steepest decent algorithm, and is analyzed in terms of a delta modulation approach. It is also applicable to low-repetition rate pulsed interferometric systems in which conventionally used dithering method is difficult to be applied.

• Journal of Communications and Networks
• /
• v.15 no.6
• /
• pp.569-575
• /
• 2013

In this paper, we present a photonic approach for generating highly stable coherent sub-terahertz (THz) signals for wireless communications. As proof-of-concept we transmit data at 100 GHz carrier frequency using on-off keying modulation and heterodyne detection. The sub-THz carrier signals are generated by photo-mixing two optical carrier signals at different frequencies, extracted from an optical frequency comb. We introduce a novel system to stabilize the phase of the optical carrier signals. Error-free transmission is successfully achieved up to a bit rate of 8.5 Gbit/s at 100 GHz.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.246-254
• /
• 2001

In this work, the stabilization of chlorosulfonated polyethylene (CSM) rubber emulsion with surfactants, i.e., nonionic (Span 60) or anionic (Sodium laurylsulfate, SLS) surfactants, was investigated. The phase inversion emulsification by interfacial chemical characteristics was used to emulsify the CSM rubber. As a result, the emulsion phase separation was observed in the case of any single surfactant. However, there was no phase separation in the mixture of Span 60 and SLS in the context of emulsion droplet size tests and rheological behaviors. The droplet size decreases by increasing the surfactant mixture, resulting in increasing the viscosity. The viscosity and shear stress determined from shear rate show a shear thinning and yield behaviors. It was then found that the emulsion stabilization can be improved using the phase inversion emulsification method and surfactant mixture.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.547-557
• /
• 2018

This work proposes a control method of frequency stabilization for grid integration of large-scale wind farms via the voltage source converter-based high-voltage direct current (VSC-HVDC) technology. First, the topology of grid integration of a large-scale wind farm via the VSC-HVDC link is provided, and simple control strategies for wind turbines, wind farm side VSC (WFVSC), and grid side VSC are presented. Second, a mathematical model between the phase angle of WFVSC and the frequency of the wind farm is established. The control principle of the large-scale wind power integrated system is analyzed in theory in accordance with the mathematical model. Third, frequency and AC voltage controllers of WFVSC are designed based on the mathematical model of the relationships between the phase angle of WFVSC and the frequency of the wind farm, and between the modulation index of WFVSC and the voltage of the wind farm. Corresponding controller structures are established by deriving a transfer function, and an optimization method for selecting the parameters of the frequency controller is presented. Finally, a case study is performed under different operating conditions by using the DIgSILENT/PowerFactory software. Results show that the proposed control method has good performance in the frequency stabilization of the large-scale wind power integrated system via the VSC-HVDC technology.