• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.272.1-272.1
• /
• 2016

In a three-dimensional topological insulator Bi2Se3, a stress control for band gap manipulation was predicted but no systematic investigation has been performed yet due to the requirement of large external stress. We report herein on the strain-dependent results for Bi2Se3 films of various thicknesses that are grown via a self-organized ordering process. Using small angle X-ray scattering and Raman spectroscopy, the changes of d-spacings in the crystal structure and phonon vibration shifts resulted from stress are clearly observed when the film thickness is below ten quintuple layers. From the UV photoemission/inverse photoemission spectroscopy (UPS/IPES) results and ab initio calculations, significant changes of the Fermi level and band gap were observed. The deformed band structure also exhibits a Van Hove singularity at specific energies in the UV absorption experiment and ab initio calculations. Our results, including the synthesis of a strained ultrathin topological insulator, suggest a new direction for electronic and spintronic applications for the future.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.41-46
• /
• 2001

This paper discusses the feasibility of improving micro-machining accuracy by using two-dimensional(2-D) vibration cutting. Vibration cutting is generated by two piezo actuators arranged orthogonally : one is actuated by a sine curve voltage input, and the other is actuated by a phase-shifted sine curve voltage. A tool attached to the vibrator oscillates in a 2-D elliptical motion, depending on the frequencies, amplitudes, and the phase shifts of two input signals and the workpiece feedrate. Along the elliptical tool locus, cutting is done in the lower part, and non-cutting is done in the upper part. By this way a unique feature of 2-D vibration cutting, that is, air lubrication between a tool and chips, is caused. Another unique feature of 2-D vibration cutting was experimentally verified, that is, some negative thrust force occurs as the direction of chip movement on a tool rake face is reversed. Those features not only help chips flow smoothly and continuously but also reduce cutting force, which results in a higher quality machined surface. Through tool path simulations and experiments under several micro-machining conditions, the 2-D vibration cutting, compared to conventional cutting, was found to result in a great decrease in the cutting force, a much smoother surface, and much less burr.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.190-197
• /
• 1999

Electronic speckle contouring(ESC) is the optical method for measuring shape by using fringe-projection techniques in electronic speckle pattern interferometry. It has the advantage of being non-contacting and can also give a field view of the surface under investigation. Fringes in ESC represent the difference in depth along the view direction between the master wavefront and the test component. The contour maps of three-dimensional diffuse objects are obtained by small shifts of optical fiber carrying the dual-object-beams and 4-frame phase shift. We proposed the contouring method by shifting the collimated illumination beams through optical fiber in order to obtain the contour fringe patterns. And also, we performed addition of incremental addition of images and experiments based on it. we obtained both quantitative increment without decorrelation effect and qualitative improvement by reducing the noise of contour fringes.

• 한국미생물·생명공학회지
• /
• 제15권5호
• /
• pp.356-360
• /
• 1987

Sisomicin 발효에 대한 온도의 영향을 살펴보았다. 각각의 온도에 대하여 균체의 비생육속도로부터 8.2 kcal/g-mol의 activation energy를 얻었다. 이 값은 발효중 균체가 균사체를 이루어 배지성분이나 산소에 대한 Internal diffusion layer를 형성하는 것을 시사해주고 있다. 한편 최종 항생물질농도는 온도가 증가함에 따라 감소하였으며, 온도의 변화를 주는 실험으로부터 대수증식기에 유지되는 배양온도가 최종 항생물질의 농도에 심한 영향을 주는 것으로 나타났다. 배양온도를 변화시켜 항생물질의 생산성을 증가시키는 방법에 대해 생각하여 보았다.

• 대한전자공학회논문지
• /
• 제22권2호
• /
• pp.1-5
• /
• 1985

본 연구에서는 단일모드 광섬유에서의 온도에 의한 위상변조 현상을 분석하고 단일모드 광섬유 간섭계를 이용한 온도센서를 설계. 제작하여 그 온도특성을 조사하였다. 설계한 fiber-optic온도센서는 Mach-Zehnder 간섭계를 이용한 위상감지형 고감도 센서로서 온도변화는 간섭무의의 이동으로써 측정되어졌다. 간섭계에 의한 측정에서 중요한 문제중의 하나는 온도분만 아니라 모든 피측정 물리량의 변화방향에 따른 간섭무의의 이동갯수와 이동방향을 동시에 측정하는 것이다. 이를 위해 다중모드 광섬유를 이용한 배열 검출기를 제작하여 매우 간편하게 간섭무늬의 이동갯수와 이동방향을 측정하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.37-43
• /
• 2002

Electronic speckle contouring(ESC) based on electronic speckle pattern interferometry is the optical method for measuring object shape by using fringe-projection techniques. This method has the advantages of being non-contact, non-destructive and a whole-field measurement of the surface under investigation. Fringes in ESC represent the difference in depth along the view direction between the master wavefront and the test component. The contour maps of three-dimensional diffuse objects can be obtained by small shifts of optical fiber carrying the dual-object-beams and 4-frame phase shifting. In this study we proposed the contouring method by shifting the collimated illumination beams through optical fiber in order to obtain the contour fringe patterns. And also, we performed the addition of incremental images through the geometrical analysis to obtain the contour fringe interval when we performed the incremental addition of images and experiments based on this method. We obtained both quantitative increment without decorrelation effect and qualitative improvement by reducing the noise of contour fringes.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.237-247
• /
• 2002

We report all sky camera and Fabry-Perot interferometer (FPI) observations of mesospheric gravity waves and a 12-hour wave at Resolute $(75^{\circ}N)$ and a joint observation of 10-hour wave with Eureka $(80^{\circ}N)$. All sky camera observations showed a low occurrence of mesosphere gravity waves during equinoxes, which is similar to the mid-latitude region. A slightly higher occurrence near solstice appears to indicate that gravity waves are not filtered out by the neutral wind in the winter. The FPI observation of a 12-hour wave showed amplitude variations from day to day. The phase of the wave is mostly stable and consistent with the GSWM prediction in the winter. The phase shifts with season as predicted by the GSWM. Four events of the 12-hour wave were found in spring with amplitudes larger than the GSW predictions. The FPls at Resolute and Eureka also observed a wave with period close to 10 hours. The 10-hour wave maybe the result of the non-linear interaction between the semi-diurnal tide and the quasi-two day wave. Further studies are under way. Overall, the combined Resolute and Eureka observation have revealed some new fractures about the mesospheric gravity wave, tidal wave, and other oscillations.

• 드라이브 ㆍ 컨트롤
• /
• 제17권3호
• /
• pp.47-56
• /
• 2020

As a shift control of automatic transmission was managed with the electronic control unit (ECU), shift quality which is a measure of shift shock during gear change has markedly improved. However, the initial clutch pressure control of the clutch filling phase should continue to rely on the predetermined control input since the input and output speeds are unchanged until the shifting process attains the inertia phase. It is critical to minimize the clutch response time and control the clutch pressure accurately at the end of clutch fill to achieve quick shift response and smoothness. Advanced transmission companies have adopted an auto calibration method which establishes the databases for the clutch piston fill-up attributes and the frictional characteristics of the disks. In this study, a distinctive auto calibration algorithm for forklift transmission under development is proposed and verified with the real-vehicle test. The experimental calibration results showed consistent turbine dynamics at the initial stage of shifts with the properly calibrated clutch-fill control parameters. By using this technique, it is necessary to finalize the shift control for the various operation conditions.

• Journal of Magnetics
• /
• 제12권4호
• /
• pp.137-140
• /
• 2007

We have studied the temperature dependent magnetic properties and crystalline phase transitionn in small amount Fe doped nickel chromite. The Crystalline structure of $NiCr_{1.7}Fe_{0.3}O_4$ is spinel cubic (Fd-3m) structure with a lattice constant $a_0=8.317\AA$ at room temperature. The magnetic $N\acute{e}el$ temperature $(T_N)$ of the Fe doped nickel chromite sample is determined to be 250 K. The $M\ddot{o}ssbauer$ spectra exhibit that there are two magnetic phases with the two different sites for the $Cr^{3+}$ ions. The spectrum at 4.2 K is fitted to two magnetic components of the magnetic hyperfine fields $H_{hf}=496$ and 485 kOe. From the spectrum at 295 K, the electric quadrupole splittings are observed with large values of 0.49 and 0.50 mm/s, respectively. The values of the isomer shifts at all temperature ranges show that the Fe ions are ferric states. We are suggested that the dynamic Jahn-Teller distortion and anisotropic magnetic relaxation effects due to the crystalline phase transition.

• 대한기계학회논문집B
• /
• 제32권5호
• /
• pp.351-358
• /
• 2008

Extinction characteristics of hydrogen-air diffusion flames at various pressures are investigated numerically by adopting counterflow flame configuration as a model flamelet. Especially, effect of radiative heat loss on flame extinction is emphasized. Only gas-phase radiation is considered here and it is assumed that $H_2O$ is the only radiating species. Radiation term depends on flame thickness, temperature, $H_2O$ concentration, and pressure. From the calculated flame structures at various pressures, flame thickness decreases with pressure, but its gradient decreases at high pressure. Flame temperature and mole fraction of $H_2O$ increase slightly with pressure. Accordingly, as pressure increases, radiative heat loss becomes dominant. When radiative heat loss is considered, radiation-induced extinction is observed at low strain rate in addition to transport-induced extinction. As pressure increases, flammable region, where flame is sustained, shifts to the high-temperature region and then, shrunk to the point on the coordinate plane of flame temperature and strain rate. The present numerical results show that radiative heat loss can reduce the operating range of a combustor significantly.