• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.17-23
• /
• 2011

The turbulent flow and vortex shedding phenomena around pantograph panhead of high speed train were investigated and compared with available experimental data and other simulations. The pantograph head was simplified to be a square-cross-section pillar and assumed to be no interference with other bodies. The Reynolds number (Re) was 22,000. The LES(large eddy simulation) of FDS code was applied to solve the momentum equations and the Wener-Wengle wall model was employed to solve the near wall turbulent flow. Smagorinsky model($C_s$=0.2) was used as SGS(subgrid scale) model. The total grid numbers were about 9 millions and the analyzed domain was divided into 12 multi blocks which were communicated with each other by MPI. The time-averaged mainstream flows were calculated and well compared with experimental data. The phased-averaged quantities had also a good agreement with experimental data. The near-wall turbulence should be carefully treated by wall function or direct resolution to get successful application of LES methods.

• Wind and Structures
• /
• 제38권5호
• /
• pp.381-398
• /
• 2024

This study presents a mode analysis of 3D turbulent velocity data around a square-section building model to identify the dynamic system for Kármán-type vortex shedding. Proper orthogonal decomposition (POD) was first performed to extract the significant 3D modes. Magnitude-squared coherence was then applied to detect the phase consistency between the modes, which were roughly divided into three groups. Group 1 (modes 1-4) depicted the main vortex shedding on the wake of the building, with mode 2 being controlled by the inflow fluctuation. Group 2 exhibited complex wake vortexes and single-sided vortex phenomena, while Group 3 exhibited more complicated phenomena, including flow separation. Subsequently, a third-order polynomial regression model was used to fit the dynamics system of modes 1, 3, and 4, which revealed average trend of the state trajectory. The two limit cycles of the regression model depicted the two rotation directions of Kármán-type vortex. Furthermore, two characteristic periods were identified from the trajectory generated by the regression model, which indicates fast and slow motions of the wake vortex. This study provides valuable insights into 3D mode morphology and dynamics of Kármán-type vortex shedding that helps to improve design and efficiency of structures in turbulent flow.

• 농업과학연구
• /
• 제48권4호
• /
• pp.965-973
• /
• 2021

The intention of this research is to analyze the effects of lactulose (LAC) supplementation on the growth performance, nutrient digestibility, microbial shedding, and fecal noxious gas emissions on weaning pigs in a 42-day trial. Based on the initial body weight and sex, a total of 255 piglets (21 day old) were randomly allocated into one of three dietary treatments with 15 replications and five pigs (two female and three male) per pen. The dietary treatments were as follows: a corn-soybean meal-based basal diet (CON) supplemented with 0, 1, and 2 g·kg^-1 of LAC. During phase 1, significant (p < 0.05) increases in the average daily feed intake and average daily gain (ADG) were observed, whereas during phase 2 and overall experimental period, significant improvements (p < 0.05) in the body weight, ADG, and gain to feed ratio were observed in pigs fed a graded level of LAC compared to those fed the CON diet. Additionally, dietary LAC supplementation significantly improved (p < 0.05) the nutrient digestibility dry matter, nitrogen, and gross energy in both phase 1 and phase 2. Moreover, the inclusion of LAC supplementation significantly increased (p < 0.05) the fecal Lactobacillus counts and reduced (p > 0.05) the E. coli counts in pigs. Furthermore, LAC supplementation reduced (p > 0.05) fecal ammonia and hydrogen sulfide gas emissions during phase 2. The results here indicate that the addition of lactulose at 1 g·kg^-1 and/or 2 g·kg^-1 would be optimal to improve the performance outcomes of weaning piglets.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.100-102
• /
• 1992

Optimal generation dispatch algorithm is developed using L.P and load dispatch method. The algorithm is composed with three steps. Fist phase, analytical algorithm is adopted to solve to minimize quadratic cost functions which fits well for planning purpose. Second phase uses L.P method for obtain economic redispatch that satisfies line constraints. When there is no solution whitch satisfy line constraints load shedding algorithm solves the problem.

• 대한기계학회논문집A
• /
• 제38권3호
• /
• pp.269-274
• /
• 2014

본 논문에서는 사보니우스형 풍력터빈의 저소음 설계에 관한 연구를 수행하였다. 선행연구를 통해 BPF 보다 높은 주파수를 기본주파수로 가지며 발생하는 하모닉 성분의 순음소음이 사보니우스형 풍력터빈의 주요한 소음임을 밝혔고, 이러한 하모닉 성분의 소음은 와류에 의한 것임을 확인하였다. 본 연구에서는 이러한 선행연구결과를 바탕으로, 사보니우스형 풍력터빈의 저소음 설계를 위해 이탈되는 와류에 위상차를 유도할 수 있는 터빈 날개 끝단을 도입하였다. CFD 기법 및 음향상사법을 적용한 복합 전산공력음향학 기법을 적용하여 제안한 저소음 사보니우스형 풍력터빈의 방사 소음을 수치적으로 예측하였고, 기존의 형상과 비교를 통해 소음 저감 효과를 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.486-493
• /
• 2000

Flow mechanism around air flow sensor of electronic control engine, especially Karman vortex type, was investigated experimentally. The two-dimensional flow characteristics in the intermediate wake region behind a triangular vortex-generator respectively apex forward facing, apex backward facing and vertical flat plates following after apex forward facing(i.e vortex-flowmeter) were investigated at Reynolods number of $ReH=1.4\times10^4$; H is the width of a triangular vortex-generator. The vortex shedding frequency for wide Reynolds number from $7\times10^3$ to $2.1\times10^4$ was also surveyed. The velocity component was measured by X-type hot wire anemometer at 8H downstream from the bluff body. The coherent structure of the intermediate wake behind a bluff body was obtained by conditional phase average technique. As a result, it was verified that the vertical flat plates following after apex forward triangular vortex-generator make not only more linear relation between free stream velocity and vortex shedding frequency but also more periodic vortex in the vicinity of the center of wake.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권8호
• /
• pp.915-922
• /
• 2005

This experimental study is conducted to investigate effects of a splitter plate, which is set on the back side of a square prism in the uniform flow. The Reynolds number is $1.44{\times}10^{4}$ based on the width of the square prism. The measurement of velocity vector and pressure distribution are carried out 4 cases of length in the range of 0.5L to 2.0L with 0.5L interval and 3 cases of Position at 0L, 0.25L, 0.5L, Flow visualization is also executed by smoke-wire method to understand the mechanism of vortex formation The results show the strong vortex shedding patterns and drags are decreased effectively, when the position of splitter plate is 0L. And the drag reduction rate is in inverse proportion to the splitter plate length

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권3호
• /
• pp.413-422
• /
• 2004

The flow characteristic in the wake around a circular cylinder with tripping wires, which was set in constant distance, was experimentally investigated in the uniform flow, Re=2.92$\times10^4$. The measurement of velocity vector and pressure distribution are carried out various angles of tripping wires in the range of $50^(\circ)$ to $80^(\circ)$ with $10^(\circ)$ interval. The results show that velocity profiles and pressure distributions are different with angles of tripping wires. The drag of the circular cylinder was decreased about 60% maximum when tripping wires' angle was $50^(\circ)$. The lowest reduction of the velocity and wake width was occurred by coanda effect when the angle was $60^(\circ)$, and the vortex shedding periodicity become rare at the same time.

• Nuclear Engineering and Technology
• /
• 제38권1호
• /
• pp.69-80
• /
• 2006

Fluid-elastic instability in an air-water two-phase cross-flow has been experimentally investigated using two different arrays of straight tube bundles: normal square (NS) array and rotated square (RS) array tube bundles with the same pitch-to-diameter ratio of 1.633. Experiments have been performed over wide ranges of mass flux and void fraction. The quantitative tube vibration displacement was measured using a pair of strain gages and the detailed orbit of the tube motion was analyzed from high-speed video recordings. The present study provides the flow pattern, detailed tube vibration response, damping ratio, hydrodynamic mass, and the fluid-elastic instability for each tube bundle. Tube vibration characteristics of the RS array tube bundle in the two-phase flow condition were quite different from those of the NS array tube bundle with respect to the vortex shedding induced vibration and the shape of the oval orbit of the tube motion at the fluid-elastic instability as well as the fluid-elastic instability constant.

• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.66-74
• /
• 2016

Concerning the numerical simulation of high-speed water jet with intensive cavitation this paper presents a practical compressible mixture flow method by coupling a simplified estimation of bubble cavitation and a compressible mixture flow computation. The mean flow of two-phase mixture is calculated by URANS for compressible fluid. The intensity of cavitation in a local field is evaluated by the volume fraction of gas phase varying with the mean flow, and the effect of cavitation on the flow turbulence is considered by applying a density correction to the evaluation of eddy viscosity. High-speed submerged water jets issuing from a sheathed sharp-edge orifice nozzle are treated when the cavitation number, ${\sigma}=0.1$, and the computation result is compared with experimental data The result reveals that cavitation occurs initially at the entrance of orifice and bubble cloud develops gradually while flowing downstream along the shear layer. Developed bubble cloud breaks up and then sheds downstream periodically near the sheath exit. The pattern of cavitation cloud shedding evaluated by simulation agrees experimental one, and the possibility to capture the unsteadily shedding of cavitation clouds is demonstrated. The decay of core velocity in cavitating jet is delayed greatly compared to that in no-activation jet, and the effect of the nozzle sheath is demonstrated.