• 한국전자통신학회논문지
• /
• 제3권2호
• /
• pp.93-100
• /
• 2008

본 논문에서는 상업용 MMIC를 이용하여 Ka-대역 위성 텔레비전 방송 수신 전용(TVRO) 저 잡음 하향변환 증폭단을 설계하였다. 저 잡음 블록은 입력단에서 저 잡음 정합시킨 증폭기를 포함한 3단 증폭기, 이미지 제거용 대역통과필터, 주파수 혼합기, 주파수 체배기 및 IF단으로 구성하였다. 저 잡음블럭을 구성하는 모듈에 대한 감쇄와 전력이득에 대한 분석을 통하여 Ka-band LNB의 특성을 만족시키는 소자를 선정하였다. 설계된 저 잡음 블록에 대한 실험 결과 변환이득은 $58{\pm}1dB$, 잡음지수 1.5dB 이하, 위상잡음은 -94.6dBc@10KHz를 나타내었다.

• 한국정보통신학회논문지
• /
• 제3권4호
• /
• pp.805-817
• /
• 1999

In this paper, the needs for introduction and adoption of MㆍHF DSC/NBDP system and for developments of its circuits and call sequences for use in the maritime mobile services for small-ships, leisure-ships and fishing ships are analyzed, discussed. Also design and implement for MㆍHF(1.6-4MHz) DSC/NBDP system is discussed. Most of casualties have been arisen from small-ships and fishing ships during last 5 years. So, the SAR schematic plans should been prepared to prevent casualties and facilitate the activities of SAR for those ships. DSC/NBDP for MㆍHF system is able to fulfill the roles of efficient SAR communication functions, and to advance the SAR system to small ships and fishing ships. This study is focused on the techniques of processing the DSC call sequences and the ARQ sequences of NBDP system. Especially ARQ sequences are expanded into processing of Korean letters, designed the call sequences and code conversion algorithm for Korean-code. It will be evaluated the availability of Korean-NBDP system. In designing the Transmitting circuits and Receiving circuits, for the carrier generation, DDS(Direct Digital Synthesizer) is used in stead of the Phase Locked Loop and frequency conversion by the mixer, BPF. And PSK modulation signals are directly generated by the controls of DDS, which show the characteristics of Spurious Free Dynamic Range are below -62dBc. Also, the monolithic U subsystem IC which provides various functional components, AD608 is used for designing the receiving circuitsㆍAnd the algorithm of Phasing methode for FSK demodulation are devised to process IF frequency 455kHz in the IF circuits.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.1-5
• /
• 2008

ZnS-$SiO_2$ composite is normally used for sputtering target. In recent years, high sputtering power for higher deposition rate often causes crack formation of the target. Therefore the target material is required that the sintered target material should have high crack resistance, excellent strength and a homogeneous microstructure with high sintered density. In this study, raw ZnS and ZnS-$SiO_2$ powders prepared by a 3-D mixer or high energy ball-milling were successfully densified by spark plasma sintering, the effective densification method of hard-to-sinter materials in a short time. After sintering, the fracture toughness was measured by the indentation fracture (IF) method. Due to the effect of crack deflection by the residual stress occurred by the second phase of fine $SiO_2$, the hardness and fracture toughness reached to 3.031 GPa and $1.014MPa{\cdot}m^{1/2}$, respectively.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.407-414
• /
• 2009

Water-in-Oil (W/O) emulsions are widely used in cosmetics. However, O/W (Oil-in-Water) emulsions are generally superior to W/O emulsions in terms of stability. In this study, we investigated the changes of viscosity, the size of emulsion droplets, and rheological properties of emulsions prepared using distearyldimonium chloride (DDC), magnesium aluminum silicate (MAS) and quaternium-18 hectorite (QH). In addition to the changes of the composition, we tested the condition of homogenization including rotation per minute of the mixer and the mixing time. The viscosity of emulsions with DDC and AMS were not changed with time and the stability of emulsions was stable during the storage time. However, the fluidity of emulsions were low due to the forming gel network in the emulsions. The gelling power of the emulsions with QH was rather weaker than that of the emulsions with DDC and MAS. The viscosity of emulsions with QH was gradually reduced and the phase separation of emulsions with high concentration of oil was observed throughout the storage time, however, the stability of emulsions with DDC, MAS and QH was excellent, the fluidity of emulsions was enhanced, and the viscosity of emulsions was sustained for a long time after setting of emulsions.

• Elastomers and Composites
• /
• 제32권3호
• /
• pp.157-165
• /
• 1997

The morphology of the thermoplastic vulcanizates prepared from ethylene-propylene-diene terpolymer, polypropylene and high density polyethylene(HDPE) or ethylene based ionomer were studied. Blends were prepared in a laboratory internal mixer where EPDM was cured in the presence of PP and HDPE or ionomer under shear with dicumyl peroxide(DCP). The effects of DCP concentration and rubber/plastics composition were studied. In the morphological analysis by scanning electron microscopy (SEM), a small amount of EPDM acted as a compatibilizer to HDPE and PP. It was also revealed that the dynamic vulcanization process could reduce the domain size of the crosslinked EPDM phase. When ionomer was added to EPDM/PP blend, the thermoplastic vulcanizate showed typical ductile fracture topology and the trend was more clearly observed when DCP contents and ionomer contents are higher.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.773-780
• /
• 2003

The three-dimensional spatial structures of impeller flow created by a six bladed Rushton turbine have identified based on the volumetric velocity information from multi-plane stereoscopic PIV measurements. A total of 10 planes with 2 mm space and a 50 mm by 64 mm size of the field of view were targeted. To reduce the depth of focus, we adopted an angle offset configuration which satisfied the Scheimpflug condition. The distortion compensation procedure was utilized during the in situ calibration. Phase-locked instantaneous data were ensemble averaged and interpolated in order to obtain mean 3-D. volumetric velocity fields on a 60 degree sector of a cylindrical ring volume enclosing the turbine blade. Using the equi-vorticity surface rendering, the spatial structure of the trailing vortices was clearly demonstrated. Detail flow characteristics of the radial jet reported in previous studies of mixer flows were easily identified.

• Macromolecular Research
• /
• 제9권3호
• /
• pp.150-156
• /
• 2001

Polystyrenes(PS) were grafted onto polypropylene(PP) in the PP solution by ultrasonic irradiation-initiated polymerization of styrene. The resulting products consisted of mixtures of homopolymers and PP-PS copolymer because of the homopolymerization of styrene itself and copolymerization with PP. The dependency of the designated polymerization on sonication times was investigated to monitor the evolution lion of the copolymerization. Formation of the PP-PS copolymer was confirmed by FTIR analysis of the reaction products after a proper separation procedure of free PS and PP-PS copolymer. It was found that the tendency for the formation of PP-PS copolymer was closely related with the phase behavior of the PP/styrene mixture which was also influenced by sonication time. In order to verify the effectiveness of the PP-PS copolymer as a compatibilizer for PP/PS blend, melt mixing of PP/PS/PP-PS was performed in a batch mixer. During the mixing, the average torque was higher for the blend containing PP-PS copolymer influencing compatibilization. In accordance with the results from FRIR analysis and torque measurement, the PS domain size remarkably decreased in the PP/PS/PP-PS blend.

• 한국통신학회논문지
• /
• 제10권6호
• /
• pp.317-326
• /
• 1985

신호의 $90^{\circ}$위상차 분배/합성이 가능한 Quadrature Hybrid는 Image Rejection Mixer등에 널리 쓰이고 있으며, 특히 VHF대 위성통신을 행할 경우에는 집중정수형으로 제작하는 것이 대단히 유리하다. 이 경우 자기결합을 갖게 되면 제작이 곤란하므로 자기결합을 갖지 않는 형식으로 광대역 특성을 갖는 소자를 설계하는 것은 대단히 중요하다. 본 연구에서는 자기결합을 갖지 않는 90Hybrid의 기본회로를 제안하고, 이 기본회로를 Phase Shifter를 이용하여 Cascade 로 연결하고 최적화함으로써 광대역화하는데 성공하였다. 여기서 설계한 Hybrid 는 약 54%의 대역폭을 가지며, Branch-Guide Type방향성 결합기에 비하여 훨씬 더 우수한 특성을 가짐을 입증하였다. 또한, 실험에 의하여 제안한 설계법의 타당성을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.689-692
• /
• 2005

본 논문에서는 2 GHz LS 대역에서 동작하는 역지향성 능동배열 안테나를 설계 제작하였다. 역지향성 안테나는 임의의 방향에서 입사하는 전파를 그 방향으로 되돌려 복사시키는 안테나 배열 시스템으로서, 반사파가 입사 반대방향으로 파면(wave front)을 갖도록 하기 위한 공액 위상변위기가 포함된 능동 안테나 배열로 구성된다. 본 연구에서는 RF/IF 신호포트와 LO 포트로 이루어진 2-포트게이트 HEMT 혼합기와 1/4파장 모노폴 안테나 배열(1${\times}$4)을 사용하여 역지향성 능동배열 안테나를 구현하였다. -45도, 0도, +45도 방향의 입사파에 대한 역지향 특성을 실험 측정하였으며, 본 연구결과는 무선 이동통신 및 RFID 등의 기지국 장치에 적용 가능하다.

• 한국항행학회논문지
• /
• 제11권1호
• /
• pp.17-23
• /
• 2007

본 논문에서는 차세대 항공 데이터 통신에 사용되는 VDR(VHF Data Radio)의 물리계층을 국제규격에 만족하도록 설계하였다. VDR의 주파수 대역은 117.975~137MHz이고, CSMA(Carrier Sense Multiple Access) 다중 접속방식, D8PSK(Differential Eight Phase Shift Keyed), 25kHz의 채널 대역폭을 사용한다. VDR의 성능 요구 조건인 인접 채널 분리, 수신감도, 혼변조, 수신기의 동작영역, 송신기의 선형성, 불요 방사 전력을 선형 및 비선형 시뮬레이션을 통해 분석 하고, 제작을 위한 방향을 제시하였다. 설계 결과 송신부는 Po1dB보다 5dB 낮은 점에서 사용해야하고, 중간 주파수를 45MHz 선정하여 스퓨리어스 발생을 억제해야한다. 수신부는 잡음지수 4.5dB, Es/No 27.52dB로 설계 되었고, 혼변조 성분을 최소화하기위해 저 잡음 증폭기의 IIP3를 +10dBm 이상을 사용하고, 혼합기의 절연특성이 30dB이상이 되어야한다.