• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.371-377
• /
• 2008

This paper deals with the phase analysis of $MgB_2$ bulk using spark plasma sintering process after ball milling. Mg and amorphous B powders were used as raw materials, and milled by planetary-mill for 9 hours at argon atmosphere. In order to confirm formation of $MgB_2$ phase, DTA and XRD were used. The milled powders were fabricated to $MgB_2$ bulk at the various temperatures by Spark Plasma Sintering. The fabricated $MgB_2$ bulk was evaluated with XRD, EDS, FE-SEM and PPMS. In the DTA result, reaction on formation of $MgB_2$ phase started at $340^{\circ}C$. This means that ball milling process improves reactivity on formation of $MgB_2$ phase. The $MgB_2$ MgO and FeB phases were characterized from XRD result. MgO and FeB were undesirable phases which affect formation of $MgB_2$ phase, and it's distribution could be confirmed from EDS mapping result. Spark Plasma Sintered sample for 5 min at $700^{\circ}C$ was relatively densified and it's density and transition temperature showing super conducting property were $1.87\;g/cm^3$ and 21K.

• 한국실내디자인학회논문집
• /
• 제40호
• /
• pp.158-164
• /
• 2003

The rapid development of information technology has much influence on architectural design. Collaboration beyond time and space has been possible by networking the work environment and digital products. Thus, the virtual design studio on architectural design is getting more important than ever before. This research investigates a virtual design studio methodology for effective collaboration. The building design process and the communication model are studied and possible modes of design collaboration are defined. This paper proposes an internet-based Virtual Reality(VR) communication tool as well as new design methodology that we call the 'Hybrid Design Methodology'. We expect that this design methodology will dramatically increase design feedbacks, and thus results in better design alternatives. There are two issues involved in developing the collaborative virtual design studio: 1) an intuitive interface that presents collaborative relations, and 2) three-dimensional computer-mediated communication tool using sketch as a modeling method. Further research issues identified at the end of the research include developing algorithms that translate mapping images to polygons for the drafting phase in the design process.

• 한국광학회지
• /
• 제17권6호
• /
• pp.507-513
• /
• 2006

본 논문에서는 출력평면에 나타나는 원 영상을 재생시키기 위하여 위상 랩핑 방법을 이용하여 암호화 수준을 향상시키고 주파수 영역에서 위상 부호화하여 암호화함으로써 잡음에 강한 복호화 방법을 제안하였다. 암호화된 영상은 원 영상이 아닌 위상 변조된 가상 영상과 무작위 위상 영상을 곱하고 제로 패딩(ze.o-padding)하여 푸리에 변환한 후 이 변환된 복소 영상을 데이터 전송 및 매핑을 용이하게 하기 위하여 실수 값으로 변환하여 위상 부호화하여 만든다. 복호화 과정은 제안한 선형적인 영상을 비선형적인 영상으로 변환시키는 위상 랩핑 방법에 의해 각각 만들어진 암호화된 영상과 복호화 키를 곱하여 푸리에 역변환하여 공간필터를 가진 출력 평면에서 원 영상을 복원함으로써 광축 정렬 문제와 픽셀 대 픽셀 대응이 용이하여 복원영상의 해상도를 향상시킬 수 있다. 제안한 방법은 허가되지 않은 사용자가 암호화된 영상을 분석함으로써 있을 수 있는 복제 가능성을 원 영상의 어떤 정보도 포함하지 않은 가상 영상을 사용함으로써 배제할 수 있고 또한 실수 값을 위상 부호화함으로써 현재에 사용되는 공간 광 변조기로 표현이 가능하다. 컴퓨터 모의 실험을 통하여 제안한 암호화 방법의 적합성과 암호화된 영상과 복호화 키 영상에 잡음이 발생하더라도 원 영상의 복원이 가능함을 확인하였다.

• 한국측량학회지
• /
• 제23권3호
• /
• pp.313-322
• /
• 2005

급속한 기술의 발전과 인간 생활 및 문화 활동의 범위가 변하고 확장됨에 따라 지표면에 빠른 변화가 발생하고 있으므로 지도와 지형공간 데이터베이스의 갱신주기는 짧아져야 한다. 이를 만족시키기 위하여 최근에 지형공간정보 분야에서는 지도제작 과정의 자동화와 데이터 처리속도의 단축을 위한 연구가 진행되고 있으며, 이 결과 수치사진측량 워크스테이션, GPS/INS 기술, 위성영상의 활용기술, 자동 정보추출 및 LiDAR 시스템이 개발되었다. 항공 LiDAR 데이터로부터 자동으로 건물을 추출하고 등고선을 생성할 수 있는 가능성에 많은 관심이 집중되고 있다. 그러나 숙련된 작업자에 의해 수동으로 건물을 도화하는 기존의 사진측량 방법에 의한 결과와 비교하면, 정확도와 효율성에 대한 좀더 심도 깊은 연구가 수행되어야 한다. 반면에, LiDAR 데이터로부터 등고선을 생성한 결과, 품질 및 정회성에 있어서 효율적이고 경제적이었다. 본 연구에서는 수치지도 제작에 필요한 건물을 추출하고 등고선을 생성하기 위하여 LiDAR 데이터의 전처리 과정과 단계별 처리과정에 관련되는 다양한 조건의 영향 및 정확도에 관하여 평가하였다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제34권9호
• /
• pp.773-784
• /
• 2007

관점지향 프로그래밍은 기존의 소프트웨어 개발 방법론으로 해결하기 어려운 횡단관심사를 모듈화 하는데 목적을 두고 있다. 초기 관점지향 프로그래밍은 프로그램 개발 단계에 초점을 맞추어 발전하다가 최근에는 요구사항 분석 및 설계부터 코드 구현 단계까지 전체 프로세스에 관점지향 프로그래밍 방법론을 적용하고자 많은 연구가 이루어지고 있다. 하지만, 관점지향 프로그래밍에서 필요한 교차점, 결합점, 충고 정의를 위한 표준화된 지침 및 명세가 없어 프로그램 개발 및 유지보수를 어렵게 하고 있다. 본 논문에서는 이와 같은 문제점을 해결하기 위하여 관점지향 프로그래밍 개발 및 유지보수를 지원하는 횡단관심사 명세 기법을 제시한다. 관심사 명시, 관심사 설계, 그리고 코드 구현 세 단계로 이루어지는 명세 단계는 요구사항 분석 단계에서 얻어지는 횡단관심사 정보를 코드로 개발할 수 있도록 단계별 지침을 제공한다. 명세 과정의 각 단계에서는 전체 횡단 관심사 목록, 횡단관심사 명세서, 애스펙트 클래스 참조 테이블, 핵심 클래스 참조 테이블을 구축하여 코드 개발 및 유지보수시 프로세스간의 추적 자료로 사용된다. 본 논문의 명세 기법은 관점지향 프로그래밍에서 해결하기 어려운 구현의 문제점, 프로그램 이해의 어려움, 재사용의 문제점을 해결함으로써 시스템 개발을 지원한다.

• 한국CDE학회논문집
• /
• 제20권4호
• /
• pp.431-442
• /
• 2015

Currently, a BIM-based quantity takeoff (QTO) system is mainly focused on architectural projects. To perform this, diverse quantity takeoff methods such as an object-based automatic quantity takeoff, manual quantity and base functions of calculation have widely been utilizing. However, since BIM library for road projects includes structural elements associated with alignment, it is necessary to establish cost estimation system interlocked with historical cost using 3D library by each unit length. Accordingly, the aim of this study is to develop cost estimation model with using a historical cost approach so that it can be utilized in construction planning based on the BIM library for road projects. For this, based on the BIM library for road, the standardized quantity is estimated, and a process for calculating historical cost and a verification model with a 5D simulation was developed by mapping a WBS code with each BIM library object. This can be applied during the approximate cost estimation process in a project planning and an initial design phase for road projects. Besides, it is expected that these results will be utilized in constructing an optimal historical cost estimation process for project libraries.

• ETRI Journal
• /
• 제46권2호
• /
• pp.227-237
• /
• 2024

This study proposes a novel, conditionally applied neural network technique to reduce the overall peak-to-average power ratio (PAPR) of an orthogonal frequency division multiplexing (OFDM) system while maintaining an acceptable bit error rate (BER) level. The main purpose of the proposed scheme is to adjust only those subcarriers whose peaks exceed a given threshold. In this respect, the developed C-ANN algorithm suppresses only the peaks of the targeted subcarriers by slightly shifting the locations of their corresponding frequency samples without affecting their phase orientations. In turn, this achieves a reasonable system performance by sustaining a tolerable BER. For practical reasons and to cover a wide range of application scenarios, the threshold for the subcarrier peaks was chosen to be proportional to the saturation level of the nonlinear power amplifier used to pass the generated OFDM blocks. Consequently, the optimal values of the factor controlling the peak threshold were obtained that satisfy both reasonable PAPR reduction and acceptable BER levels. Furthermore, the proposed system does not require a recovery process at the receiver, thus making the computational process less complex. The simulation results show that the proposed system model performed satisfactorily, attaining both low PAPR and BER for specific application settings using comparatively fewer computations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.719-722
• /
• 2003

Ferroelectric $Pb(Zr_{1-x}Ti_x)O_3$ (PZT) films were deposited on (001) MgO single crystals using sol-gel method. Structural properties and surface morphologies of PZT films were investigated using an X-ray diffractometer and a scanning electron microscopy, respectively. The dielectric properties of PZT films were investigated with the dc bias field using interdigitated capacitors (IDC) which were fabricated on PZT films using a thick metal layer by photolithography and dry etching process. The small signal dielectric properties of PZT films were calculated by a modified conformal mapping method with low and high frequency data, such as capacitance measured by an impedance gain/phase analyzer at 100 kHz and reflection coefficient (S-parameter) measured by a HP 8510C vector network analyzer at 1 -20 GHz. The IDC on PZT films exhibited about 67% of capacitance change with an electric field of 135 kV/cm at 10 GHz. These PZT thin films can be applied to tunable microwave devices such as phase shifters, tunable resonators and tunable filters.

• 한국재료학회지
• /
• 제21권10호
• /
• pp.563-567
• /
• 2011

We report the structural characterization of $Bi_xZn_{1-x}O$ thin films grown on c-plane sapphire substrates by plasma-assisted molecular beam epitaxy. By increasing the Bi flux during the growth process, $Bi_xZn_{1-x}O$ thin films with various Bi contents (x = 0~13.17 atomic %) were prepared. X-ray diffraction (XRD) measurements revealed the formation of Bi-oxide phase in (Bi)ZnO after increasing the Bi content. However, it was impossible to determine whether the formed Bi-oxide phase was the monoclinic structure ${\alpha}-Bi_2O_3$ or the tetragonal structure ${\beta}-Bi_2O_3$ by means of XRD ${\theta}-2{\theta}$ measurements, as the observed diffraction peaks of the $2{\theta}$ value at ~28 were very close to reflection of the (012) plane for the monoclinic structure ${\alpha}-Bi_2O_3$ at 28.064 and the reflection of the (201) plane for the tetragonal structure ${\beta}-Bi_2O_3$ at 27.946. By means of transmission electron microscopy (TEM) using a diffraction pattern analysis and a high-resolution lattice image, it was finally determined as the monoclinic structure ${\alpha}-Bi_2O_3$ phase. To investigate the distribution of the Bi and Bi-oxide phases in BiZnO films, elemental mapping using energy dispersive spectroscopy equipped with TEM was performed. Considering both the XRD and the elemental mapping results, it was concluded that hexagonal-structure wurtzite $Bi_xZn_{1-x}O$ thin films were grown at a low Bi content (x = ~2.37 atomic %) without the formation of ${\alpha}-Bi_2O_3$. However, the increased Bi content (x = 4.63~13.17 atomic %) resulted in the formation of the ${\alpha}-Bi_2O_3$ phase in the wurtzite (Bi)ZnO matrix.

• 한국CDE학회논문집
• /
• 제13권5호
• /
• pp.352-361
• /
• 2008

Architectural design work depends on information made from earlier phases such as feasibility study, planning, and conceptual design. This design guideline information includes design objectives, requirements, and constraints made by decision-making, and has great influence on various works of latter phases of design process. Despite of this cognition, however, the lack of design guideline information management still remains as one among the critical issues in design area. Design tools with design guideline information do not also address the issue of interoperability throughout the life-cycle of buildings. The purpose of this research is to propose a method for design guideline information management by using the IFC technology and IFC Property set (Pset) extension mechanism. The method comprises defining and mapping the practically used design guideline items and extensible IFC data model, and includes the management of relationships that exist between design guideline information and design model in the IFC data model.