• 천문학회지
• /
• 제48권2호
• /
• pp.139-154
• /
• 2015

We carry out three-dimensional hydrodynamic simulations of the supernova remnants (SNRs) produced inside molecular clouds (MCs) near their surface using the HLL code (Harten et al. 1983). We explore the dynamical evolution and the X-ray morphology of SNRs after breaking through the MC surface for ranges of the explosion depths below the surface and the density ratios of the clouds to the intercloud media (ICM). We find that if an SNR breaks out through an MC surface in its Sedov stage, the outermost dense shell of the remnant is divided into several layers. The divided layers are subject to the Rayleigh-Taylor instability and fragmented. On the other hand, if an SNR breaks through an MC after the remnant enters the snowplow phase, the radiative shell is not divided to layers. We also compare the predictions of previous analytic solutions for the expansion of SNRs in stratified media with our onedimensional simulations. Moreover, we produce synthetic X-ray surface brightness in order to research the center-bright X-ray morphology shown in thermal composite SNRs. In the late stages, a breakout SNR shows the center-bright X-ray morphology inside an MC in our results. We apply our model to the observational results of the X-ray morphology of the thermal composite SNR 3C 391.

• 한국추진공학회지
• /
• 제14권6호
• /
• pp.31-37
• /
• 2010

본 연구에서는 Hydroxyl Terminated Polyether(HTPE) 추진제 원료 및 HTPE 둔감 추진제 조성 2종에 대하여 Differential Scanning Calorimetry(DSC)와 Thermal Gravimetric Analysis(TGA)를 사용하여 열분해 특성을 고찰하였고, EIDS 완속가열 시험을 수행하였다. AN이 포함된 HTPE 002는 약 $125^{\circ}C$에서 AN의 상전이과정(II$\rightarrow$I)을 거친 후, 약 $200^{\circ}C$범위까지 BuNENA와 AN이 함께 발열특성을 가지고 분해됨을 알 수 있었다. EIDS 완속가열 시험을 수행한 결과 HTPE 001은 $250^{\circ}C$, HTPE 002는 $152^{\circ}C$ 부근에서 반응이 있어났으며, 두 추진제 모두 $115^{\circ}C$부근에서 급격한 온도 상승이 일어났다. 추진제 HTPE 001과 HTPE 002의 열폭발에 대한 임계온도, Tc,를 Semenov의 열폭발 이론과 몇 가지 가열속도에서 측정된 비등온 곡선으로부터 계산되었고, 임계온도 계산에 사용된 열분해에 대한 활성화에너지는 Kissinger 방법으로 측정하였다.

• 한국가스학회지
• /
• 제23권6호
• /
• pp.39-60
• /
• 2019

한국가스안전공사는 진단 기반기술 국산화와 진단 역량 강화를 위해 자체적인 피해영향평가 시스템을 구축하고 있다. 유사 프로그램인 DNV PHAST나 TNO EFFECTS와 달리, API-581 기준을 근간한 ETA 분석을 통해 최종 피해영역 산출 기법을 구현하였으며, HTML5 기반 차세대 웹 기술을 기반으로 편리한 사용자 인터페이스를 구축하였다. 또한, 혼합물질 분석이 가능하도록 3차 상태방정식(Peng-Robinson, SRK, RK)과 퓨게시티를 활용한 상평형 모듈이 구현되었고, 공기보다 무거운 가스에 대한 확산 분석을 위해 SLAB Dispersion 알고리즘을 적용하였다. CCPS와 TNO Yellow Book에서 소개된 피해영향평가 알고리즘을 채용하여 누출분석 모듈, Fireball, Pool Fire, Jet Fire, Flash Fire, Vapor Cloud Explosion 영향 평가 모듈을 개발하였다. 그 외 EIGA 기준, PAC 기준 농도, Bevi Reference Book 등에서 제시된 기준 값들을 활용하여 안전거리 산출 조건을 마련하였다. 현재 전체 계산 모듈의 알고리즘 구현은 완료되었으며, 기본적인 사용자인터페이스 구축까지 완료되었다. 향후, 사용자 인터페이스 보완과 더불어, 모듈 각각에 대한 개별적인 검증과 동일한 사고 시나리오에 대한 유사 프로그램 구동 결과를 비교하여 전체 시스템의 정확도를 보완할 예정이다.

• World Technopolis Review
• /
• 제4권1호
• /
• pp.11-22
• /
• 2015

Globalization, increasing technological advancements and dynamic knowledge diffusion are moving our world closer together at a unique scale and pace. At the same time, our rapidly changing society is confronted with major challenges ranging from demographic to economic ones; challenges that necessitate highly innovative solutions, forcing us to reconsider the way that we actually innovate and create shared value. As such the linear, centralized innovation models of the past need to be replaced with new approaches; approaches that are based upon an open and collaborative, global network perspective where all innovation actors strategically network and collaborate, openly distribute their ideas and co-innovate/co-create in a global context utilizing our society's full innovation potential (Innovation 4.0 - Open Innovation 2.0). These emerging innovation paradigms create "an opportunity for a new entrepreneurial renaissance which can drive a Cambrian like explosion of sustainable wealth creation" (Curley 2013). Thus, in order to materialize this entrepreneurial renaissance, it is critical not only to value but also to actively employ this new innovation paradigms so as to derive community-driven shared value that stems from global innovation networks. This paper argues that there is a gap in existing business incubation model that needs to be filled, in that the innovation and entrepreneurship community cannot afford to ignore the emerging innovation paradigms and rely upon closed incubation models but has to adopt an "open incubation" (Ziouvelou 2013). The open incubation model is based on the principles of open innovation, crowdsourcing and co-creation of shared value and enables individual users and innovation stakeholders to strategically network, find collaborators and partners, co-create ideas and prototypes, share their ideas/prototypes and utilize the wisdom of the crowd to assess the value of these project ideas/prototypes, while at the same time find connections/partners, business and technical information, knowledge on start-up related topics, online tools, online content, open data and open educational material and most importantly access to capital and crowd-funding. By introducing a new incubation phase, namely the "interest phase", open incubation bridges the gap between entrepreneurial need and action and addresses the wantpreneurial needs during the innovation conception phase. In this context one such ecosystem that aligns fully with the open incubation model and theoretical approach, is the VOICE ecosystem. VOICE is an international, community-driven innovation and entrepreneurship ecosystem based on open innovation, crowdsourcing and co-creation principles that has no physical location as opposed to traditional business incubators. VOICE aims to tap into the collective intelligence of the crowd and turn their entrepreneurial interest or need into a collaborative project that will result into a prototype and to a successful "crowd-venture".

• 대한인간공학회지
• /
• 제30권1호
• /
• pp.99-108
• /
• 2011

Almost all companies have paid much attention to the safety management ranging from maintenance to operation even at the stage of designing in order to prevent accidents, but fatal accidents continue to increase throughout the world. In particular, it is essential to systematically prevent such fatal accidents as fire, explosion or leakage of toxic gas at factories in order to not only protect the workers and neighbors but also prevent economic losses and environmental pollution. Though it is well known that accident probability is very low in NPP(Nuclear Power Plants), the reason why many researches are still being performed about the accidents is the results may be so severe. HRA is the main process to make preparation for possibility of human error in designing of the NPP. But those techniques have some problems and limitation as follows; the evaluation sensitivity of those techniques are out of date. And the evaluation of human error is not coupled with the design process. Additionally, the scope of the human error which has to be included in reliability assessment should be expanded. This work focuses on the coincidence of human error and mechanical failure for some important performance shaping factors to propose a method for improving safety effectively of the process industries. In order to apply in these purposes into the thesis, I found 63 critical Performance Shaping Factors of the eight dimensions throughout studies that I executed earlier. In this study, various analysis of opinion of specialists(Personal Factors, Training, Knowledge or Experience, Procedures and Documentation, Information, Communications, HMI, Workplace Design, Quality of Environment, Team Factors) and the guideline for construction of PSF were accomplished. The selected method was AHP which simplifies objective conclusions by maintaining consistency. This research focused on the implementation process of PSF to evaluate the process of PSF at each phase. As a result, we propose an evaluation model of PSF as a tool to find critical problem at each phase and improve on how to resolve the problems found at each phase. This evaluation model makes it possible to extraction of PSF succesfully by presenting the basis of assessment which will be used by enterprises to minimize the trial and error of construction process of PSF.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.865-874
• /
• 2020

Offshore drilling units have a very dangerous working conditions due to the harsh working environment of the ocean and the high possibility of fire or explosion. This study would identify the hazards that emerge from the marine environment in the operation and maintenance phase of offshore drilling units and show how these hazards can be reduced through risk assessment/management. Various risk reduction and management measures were first reviewed, and Job Safety Analysis (JSA) was selected as the risk assessment technique of this study. In order to understand the characteristics of offshore drilling operations, accident statistics of onshore and offshore drilling were analyzed and compared with each other, and major risk factors for offshore drilling were derived. The jobs in which offshore drilling accidents occur more frequently than onshore drilling was analyzed as the job of fastening, transporting and moving pipes and various materials. This result is due to the limited space of the ocean and the work environment that is prone to being shaken by wind, waves and ocean currents. Based on these statistical results, the job of picking and making up drill pipes was selected as a high-risk job, and JSA was performed as an example. A detailed safety check procedure is proposed so that workers can fully recognize the danger and perform work in a safe state that has been confirmed.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1163-1168
• /
• 2011

Most transformers use insulating and cooling fluids derived from petroleum crude oil, but mineral oil has some possibility of environmental pollution and fire with explosion. vegetable oil fluids extracted from seed has superior biodegradation and fire-resistant properties including an exceptionally high fire point enhancing fire safety. In this study, it is aimed at the practicality of substituting natural ester dielectric fluid for mineral oil in liquid insulation system of transformers. As a rise in coil winding temperature has a direct influence on transformer life time, it is important to evaluate the temperature rise of coil winding in vegetable oil in comparison with mineral oil. Four transformers for the test are designed with 10KVA, 13.2KV, one phase unit. The temperature are directly measured in insulating oil of these transformers with the two sorts of natural ester and mineral oil dielectric fluid respectively. Experiment for aging carry out two means. First means remained $120^{\circ}C$ that transformer of mineral oil were operated at 185% load. Second means is that insulating oils of two natural ester and mineral oil were aged by thermal cycles repeating from $30^{\circ}C$ to $120^{\circ}C$. For the heating, Transformers were operated at 185% load. For the cooling, cooling system was operated in the chamber. Samples were analyzed at 42, 63, 93, 143, 190, 240 300cycles. Analysis contents are dielectric strength, total acid value. Mineral oils compared results of first means with results of second means. And compared two sort natural esters respectively with mineral oil in second means.

• Nuclear Engineering and Technology
• /
• 제48권6호
• /
• pp.1330-1337
• /
• 2016

A visualization test of the fuel-coolant interaction in the Test for Real cOrium Interaction with water (TROI) test facility was carried out. To experimentally simulate the In-Vessel corium Retention (IVR)- External Reactor Vessel Cooling (ERVC) conditions, prototypic corium was released directly into the coolant water without a free fall in a gas phase before making contact with the coolant. Corium (34.39 kg) consisting of uranium oxide and zirconium oxide with a weight ratio of 8:2 was superheated, and 22.54 kg of the 34.39 kg corium was passed through water contained in a transparent interaction vessel. An image of the corium jet behavior in the coolant was taken by a high-speed camera every millisecond. Thermocouple junctions installed in the vertical direction of the coolant were cut sequentially by the falling corium jet. It was clearly observed that the visualization image of the corium jet taken during the fuel-coolant interaction corresponded with the temperature variations in the direction of the falling melt. The corium penetrated through the coolant, and the jet leading edge velocity was 2.0 m/s. Debris smaller than 1 mm was 15% of the total weight of the debris collected after a fuel-coolant interaction test, and the mass median diameter was 2.9 mm.

• 천문학회보
• /
• 제45권1호
• /
• pp.36.1-36.1
• /
• 2020

The progenitor of Type Ia supernovae (SNe Ia) is mainly believed to be a carbon/oxygen white dwarf (WD) with non-degenerate (single degenerate) or another WD companion (double degenerate). However, there is little observational evidence of their progenitor system. Recent studies suggest that shock-breakout cooling emission after the explosion can constrain the size of the progenitor system. To do so, we obtained a optical/Near-IR light curve of SN 2019ein, a normal but slightly sub-luminous type Ia supernova, from the very early phase using our high-cadence observation of Intensive Monitoring Survey of Nearby Galaxies (IMSNG). Assuming the expanding fireball model, the simple power-law fitting of the early part of the light curve gives power indices of 1.91 (B) and 2.09 (R) implying radioactive decay of 56Ni is the dominant energy source. By comparison with the expected light curve of the cooling emission, the early observation provides us an upper limit of the companion size of R∗≤1R⊙. This result suggests that we can exclude a large companion such as red giants, which is consistent with the previous study.

• Journal of Radiation Protection and Research
• /
• 제36권3호
• /
• pp.148-153
• /
• 2011

국제원자력기구(IAEA)에서 주관하는 국제비교프로그램 EMRAS-2(Environmental Modelling for RAdiation Safety, Phase 2) 내 도시오염평가분과에서 설계한 가상 방사능오염 시나리오에 대해 국내모델 METRO-K를 사용하여 도시환경을 구성하는 오염표면의 선량률에 대한 중요도를 분석하였다. 선량률에 대한 오염표면의 기여는 평가위치와 사건 발생 후 시간에 따라 뚜렷이 다른 차이를 나타냈다. 또한 사건이 발생한 당시 강우의 유무와 강우의 강도에 따라서도 오염표면의 기여는 뚜렷한 차이를 나타냈다. 결과적으로 만일 원자력발전소의 사고나 방사능분산장치의 폭발 등과 같은 불의의 사건이 발생하여 도시지역을 오염시킬 경우 방사능피폭에 따른 인체 위해 뿐 아니라 경제적 사회적 영향을 최소화하기 위해서는 해당 환경을 구성하고 있는 표면의 특성을 고려하여 적절한 대응행위를 선택하는 것이 중요하다는 사실을 알 수 있었다.