• 한국전기전자재료학회논문지
• /
• 제25권10호
• /
• pp.824-829
• /
• 2012

Zn wires have been electrically exploded in methanol or distilled water using the pulsed power technologies. The nanopowders produced by the explosions have been observed by using SEM and TEM, and analyzed its phase by using EDS and XRD. The nanopowders produced in distilled water showed ZnO phase only. On the other hands, the nanopowder produced in methanol showed mixed phases with Zn and ZnO. The HR-TEM images of the nanopowders produced in methanol showed that the some particles have been coated with carbon like materials. It is considered that the carbon coatings could be depended on the positions of the particles during the plasma state formed by explosion.

• 한국재료학회지
• /
• 제34권3호
• /
• pp.138-143
• /
• 2024

Ni-CNT nanocomposites were synthesized via the electrical explosion of wire (EEW) in acetone and deionized (DI) water liquid conditions with different CNT compositions. The change in the shape and properties of the Ni-CNT nanopowders were determined based on the type of fluids and CNT compositions. In every case, the Ni nanopowder had a spherical shape and the CNT powder had a tube shape. However, the Ni-CNT nanopowders obtained in DI water exhibited irregular shapes due to the oxidation of Ni. Phase analysis also revealed the existence of nickel oxide when using DI water, as well as some unknown peaks with acetone, which may form due to the metastable phase of Ni. Magnetic properties were investigated using a Vibrating Sample Magnetometer (VSM) for all cases. Nanopowders prepared in DI water conditions had better magnetic properties than those in acetone, as evidenced by the simultaneous formation of super paramagnetic NiO peaks and ferromagnetic Ni peaks. The DI water (Ni:CNT = 1:0.3) sample revealed better magnetic results than the DI water (Ni-CNT = 1:0.5) because it had less CNT contents.

• 한국전기전자재료학회논문지
• /
• 제23권9호
• /
• pp.736-740
• /
• 2010

Nickel wires of 0.8 mm in diameter and 80 mm in length were electrically exploded in liquid media such as water, ethyl alcohol. The distribution of particle sizes was broad from a few micrometers to tens of nanometer. It was identified that the particles could be classified according to its sizes by using centrifugal separator. The powder prepared in distilled water showed mainly pure metallic Ni phase although a little oxide phase was observed. The powders prepared in ethyl alcohol showed complicated unknown phases, which is attributed to the compound of carbon in the organic liquid. This unknown phase was turned to pure metallic Ni phase after heat treatment.

• 한국분말재료학회지
• /
• 제11권2호
• /
• pp.130-136
• /
• 2004

The passivation and oxidation process of tungsten and molybdenum narlopowders, produced by electrical explosion of wires was studied by means of FE-SEM, XPS. XRD, TEM, DIA-TGA and sire distribution analysis. In addition, the phase transformation of W and Mo nanopowders under oxidation in air was investigated. A chemical process is suggested for the oxidation of W and Mo nano-particles after a comprehensive testing of passivated and oxidized powders.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1272-1275
• /
• 2010

The Cu powder was prepared in distilled water. It has a wide range of size distribution. The submicron-sized particles in the Cu powder were removed by using continuous type centrifugal separator. The average particle size after classification was approximately 50nm. The XRD analysis showed that pure Cu phase and oxide phase ($Cu_2O$)weremixedinthepowderpreparedbythismethod.

• 한국화재소방학회논문지
• /
• 제19권1호
• /
• pp.20-28
• /
• 2005

미국, 유럽 등의 대형 화학회사들은 효율적인 위험관리를 위해 단계적 위험성평가 전략을 채택하고 있다. HAZOP이나 정량적위험성평가와 같은 상세한 평가를 수행하기 위한 사전단계로서 위험선별(risk screening)기법을 도입하였다. 본 연구에서는 Khan과 Abbasi가 제안한 위험선별방법인 화재폭발손실지수 법(Fire & Explosion Damage Index, FEDI)을 국내의 BTX플랜트에 적용시켜 보았다. 적용결과를 정량적위험성평가의 결과와 비교해 본 결과, 화재폭발손실지수법이 위험잠재성을 파악하는데 효과적으로 사용될 수 있음을 알 수 있었다. 또한 화재폭발손실지수 법에 대한 민감도분석을 수행함으로써 화재 및 폭발에 영향을 미치는 가장 큰 인자는 설비내 물질의 특성과 양(quantity)임을 알 수 있었다. 본 연구의 결과를 바탕으로 하여 HAZOP의 사전단계로서 화재폭발손실지수 법을 적용한다면 보다 효율적인 위험성 평가가 가능할 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3027-3032
• /
• 2007

To understand the complex phenomena performed in steam explosion, the fast and global measurement of the steam distribution is imperative for this extremely rapid transient stimulation of the bubble breakup and coalescence due to turbulent eddies and shock waves. TROI, the experimental facility requests more robust sensor system to meet this requirement. In Europe, researchers are prefer a X-ray method but this method is very expensive and has limited measurement range. There is an alternative technology such as ECT. Because of TROI's geometry, however, we need axial tomography method. This paper reviews image reconstruction algorethms for axial tomography, including Tikhonov regularization and iterative Tikhonov regularization. Axial tomography method is examined by simulation and experiment for typical permittivity distributions. Future works in axial tomography technology is discussed.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.64-70
• /
• 2003

For the unconfined vapor cloud explosion(UVCE) accident by the continuous release of gas-liquid flow of various saturated liquids in a vessel at ground level, overpressures were estimated by TNT equivalency model with two estimation methods, such as UVCE I model based on a constant release time and UVCEII model based on a real travel time of vapor by dispersion and analyzed with various release conditions. As a simulation result the simple, easy, and correct method of evaluation of consequences of the UVCE accident was proposed by using consequences of UVCE I model and correlation equations for differences of overpressures between UVCE models, so that this evaluation method could be used easily in the small and medium size enterprises without using the dispersion model.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.509-516
• /
• 1995

The uncertainty analysis for the in-vessel steam explosion during severe accidents at a nuclear power plant is performed using a probabilistic approach. This approach consists of four steps; 1) screening, 2) quantification of uncertainty 3) propagation of uncertainty, and 4) output analysis. And the specific methods which satisfy the sub-objectives of each step are prepared and presented. Compared with existing ones, the unique feature of this approach is the improved estimation of uncertainties through quantification, which ensures the defensibility of the resultant failure probability distributions. Using the approach, the containment failure probability due to in-vessel steam explosion is calculated. The results of analysis show that 1) pour diameter is the most dominant factor and slug condensed phase fraction is the least and 2) fraction of core molten is the second most dominant factor, which is identified as distinct feature of this study as compared with previous studies.

• 한국분말재료학회지
• /
• 제19권1호
• /
• pp.49-54
• /
• 2012

Tungsten nanopowders were produced by the method of wires electrical explosion in the different gases. The study of phase and dispersed composition of the powders was carried out. The influence of electrical parameters such as the value of energy input in wire and the arc stage of the explosion was discussed. The factors that make for decreasing the particles size are the lower pressure of surrounding gas and the use of addition of chemically reactive gas.