• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.196-202
• /
• 2019

In this study, the excessive noise and vibration phenomena of a high-speed Ro/Ro passenger ship were analyzed, and a countermeasure was taken based on them. This ship was granted a comfort class notation by the classification society, which was COMFORT-VIBRATION-II and COMFORT-NOISE-CREW-II. However, unfortunately, excessive noise and vibration in the aft part of the ship were delivered from the twin shaft propellers, and therefore the Class Requirement was not satisfied before delivery. In order to obtain the class notation, all of the concerned parties came to an agreement to reduce the noise and vibration level during operation after delivery because a seasonal ferry service was already scheduled and the cabin was fully booked. The root cause of the massive amount of noise and vibration was mainly the propeller-induced excitation pulse and beating that occurred from the mismatch of the rotating speeds of the two shaft lines. A 1st order vibrating force and beating phenomena existed in the propeller. Thus, a reduction of the excitation force, elimination of the beating phenomena, and decrease of the noise level at the aft area cabins and public spaces were required. In addition, structural reinforcements were conducted using pillars and additional girders at the aft part of the decks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.136-143
• /
• 2016

To provide a type approval test for Ballast Water Treatment System (BWTS) of United States Coast Guard (USCG) Phase-II, this study examined the concentrating efficiency of nets for ${\geq}10{\mu}m$ and ${\leq}50{\mu}m$ sized phytoplanktonic organisms using different mesh sized nets ($5{\mu}m$ or $7{\mu}m$), different injection methods (hand breaker as semi-continuous assessment or pump as continuous assessment), and different filterability for the water volume. As a result of the t-test, the net concentrated efficiency between $5{\mu}m$ and $7{\mu}m$ mesh size was not significant (p > 0.05). The difference in the net concentrated efficiency for filtered natural water volume was not significant (p > 0.05). On the other hand, the Chl.a concentration in the continuous water injection method was significantly (p < 0.05) higher than that of semi-continuous water injection (t-test: t: -4.058). In the natural phytoplankton community, a total of 36 species were identified, including Bacillariophyta (17 species), Dinophyta (15 species), Euglenophyta (1 species), Dictyochophyta (2 species), and unidentified taxa (1 species). Among them, diatom Pseudo-nitzchia spp. was remarkably dominant. In particular, the net concentrated efficiency in all assessments was underestimated to be approximately 20-25%, which was caused by the small size Pseudo-nitzchia spp.. A width size of these genus might have passed through the $5{\mu}m$ or $7{\mu}m$ mesh size of the net. Therefore, net concentrated efficiency is dependent on the size of the observed species in natural water. This issue should be considered when determining the net volume for the type approval test of BWTS.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.12
• /
• pp.1947-1953
• /
• 2006

There have been a number of studies of methods for recycling animal wastewater to provide new bioresources. In the present work, a marine algal culture medium, designated KEP II, was prepared by adding swine waste (3% v/v) fermented by soil bacteria to a dilution of f/2 culture medium (CT). When Phaeodactylum tricornutum was grown in batch culture in KEP II, the cells lasted long at the exponential phase producing the specific growth rate and biomass; the production of total amino acids and secondary metabolites rose up to 5-fold. It also substantially enhanced the maximum quantum yield of photo system (PS) II of P. tricornutum, greatly increased the level of thylakoid membranes containing PS, and stimulated the production of pyrenoids, including enzymes for $CO_2$ fixation in chloroplasts. KEP II should improve the cost efficiency of industrial mass batch cultures and the value of microalgae for long-term preservation of fresh aquaculture feed as well as production of anticancer and antioxidant agents. Specifically, a low-cost medium for growing the diatoms of aquaculture feed will be economically advantageous.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.2
• /
• pp.85-94
• /
• 1986

To study fate of carbofuran in paddy system, C-14 labelled carbofuran was applied to paddy water containing rice seedlings and time course study was made on the distribution, metabolism and chemical transformation of the systemic insecticide. Carbofuran was readily absorbed by plant root and translocated to shoots where most of the radioactivities were confined to leaf tips. The fact that gradual increases in radioactivities of both aqueous phase extracts and non-extractable fractions of plants (shoots and root) increased with incubation is taken as an evidence that reactions (phase I and II) proceed in rice plants. Carbofuran and its five metabolites were all detected by TLC in organic phase extracts of paddy plants or soil. Evidence was put forward that carbofuran and its five metabolites were all identified as aglycones of conjugates. 7-benzofuranol and 3-hydroxycarbofuran were the most abundant aglycones. Soil microbes appears to have little effects on the metabolism of carbofuran. They increased radioactivity of non-extractable fraction and reduced that of organic phase extracts of paddy soil.

• Nuclear Engineering and Technology
• /
• v.47 no.1
• /
• pp.115-125
• /
• 2015

Background: Residual stress always exists on any kind of welded area. This residual stress can cause the welded material to crack or fracture. For many years, the hole-drilling method has been widely used for measuring residual stress. However, this method is destructive. Nowadays, electronic speckle pattern interferometry (ESPI) can be used to measure residual stress with or without the hole-drilling method. ESPI is an optical nondestructive testing methods that use the speckle effect. Mechanical properties can be measured by calculation of the phase difference by the variation of temperature, pressure, or loading force. Methods: In this paper, the residual stress on the butt-welded area is measured by using ESPI with a suggested numerical calculation. Two types of specimens are prepared. Type I is made of pure base metal part and type II has a welded part at the center. These specimens are tensile tested with a material test system. At the same time, the ESPI system was applied to this test. Results: From the results of ESPI, the elastic modulus and the residual stress around the welded area can be calculated and estimated. Conclusion: With this result, it is confirmed that the residual stress on the welded area can be measured with high precision by ESPI.

• Journal of Korean Society of Rural Planning
• /
• v.3 no.2
• /
• pp.50-61
• /
• 1997

As one of methodological approaches for objective and systematic evaluation for rural resources, a sequential system for significance determination of resources items was formulated using AHP (Analytic Hierarchy Process) as the base technique. By the system constructed in this study, the significance values were calculated for all items of standard goal system which had been presented in the first phase- paper of research works for rural resources evaluation. The results analysed and obtained in the study are summarized as follows; 1. In case that the number of resources items for evaluation are relatively large, stepwise matrix method is considered as the better one for pair-comparison works in view of evaluator's convenience and consistency. 2. The significance valuing results for most resources items showed a considerable difference between characteristic areas, especially in aspects of land and human resources, so being considered as wet reflecting the specific areal varieties, 3. On land resources, the items for industrial development and land use showed higher significance value, while natural environment resources the items for ecological varieties and on human resources the items for artificial facilities. However, lower-valued ones were the items for mineral stocks in land resources, for control and protection in natural environment resources and for lower-level culture heritage respectively.

• Macromolecular Research
• /
• v.17 no.3
• /
• pp.187-191
• /
• 2009

Platinum (Pt) nanoparticles were prepared by the liquid-phase reduction of tetraammineplatinum (II) chloride $([Pt(NH_3)_4]Cl_2)$ using Nafion as a stabilizer under various conditions of the Nation phase. This method is novel in its use of electrostatic interactions between the Pt complex ions and sulfonic groups in the hydrated Nation molecules. The synthesized Pt nanoparticles of the recast film system had a cubic shape. In the case of the Nation solution system, the Pt nanoparticles mainly had a spherical shape. The shapes and sizes of the Pt nanoparticles were strongly influenced by the Nation phase.

• Applied Biological Chemistry
• /
• v.37 no.3
• /
• pp.203-209
• /
• 1994

When $^{14}C-{\alpha}-endosulfan$ was incubated with carp liver, kidney and gut preparations, it was metabolized to water soluble and organosoluble metabolites. In an in vitro test, endosulfan was converted to endosulfan ${\alpha}-hydroxyether$ (EHE), endosulfan alcohol (EA) and endosulfan ether (EE). The addition of NADPH resulted in rapid conversion of endosulfan to the metabolites in 105,000 g soluble fraction and microsomes. However, the rate of metabolism of endosulfan in liver, kidney and gut supplemented with NADPH as a cofactor was higher in the 105,000 g soluble fraction than that in the microsomes of carp under incubation conditions. The enzymes probably involved in the metabolism of endosulfan include the glutathione S-transferase (GST) and the mixed function oxidases (MFO), based on the evidence that addition of either GSH or NADPH increased the degradation of endosulfan.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.281-289
• /
• 2013

As the number of clinical trials conducted in Korea increases, the need of the Electronic Data Capture (EDC) system for effective clinical data management is also increased. Recently, the Korea Food and Drug Association published 'Guideline for the Electronic Clinical Trial Data Management and Processing' and it would be the foundation for establishing regulation of electronic clinical data management. In this research, we conducted the survey regarding adoption rate of EDC system in clinical trials in hospitals, Contract Research Organizations (CRO), and pharmaceutical companies. And the perceived importance and the ease of application for the Guideline were investigated. The adoption rates of EDC system was 77.6% but it mostly applied to less than five trials. Also EDC system was mostly used in phase I and phase II trials and the utilization rate of CRO was the highest. The perceived importance for the Guideline was high among all three organizations but, in case of the perceived ease of its application, CRO was the highest. Also, the perceived importance of the clinical data standard was high and the standard for data collection was mostly required. However, the comprehension for the global standard of the electronic data was relatively low, so that education is required. This result would be the foundation to increase the electronic clinical trials and develop proper regulation and principles for clinical data standards in Korea.

• Wind and Structures
• /
• v.30 no.4
• /
• pp.339-366
• /
• 2020

This study aims at modeling boundary layers (BLs) encountered in sparse and built environments (i.e. open, suburban and urban) at the subsonic Wind Tunnel (WT) at Ryerson University (RU). This WT has an insignificant turbulence intensity and requires a flow-conditioning system consisting of turbulence generating elements (i.e., spires, roughness blocks, barriers) to achieve proper turbulent characteristics. This system was developed and validated in the current study in three phases. In phase I, several Computational Fluid Dynamic (CFD) simulations of the tunnel with generating elements were conducted to understand the effect of each element on the flow. This led to a preliminary design of the system, in which horizontal barriers (slats) are added to the spires to introduce turbulence at higher levels of the tunnel. This design was revisited in phase II, to specify slat dimensions leading to target BLs encountered by tall buildings. It was found that rougher BLs require deeper slats and, therefore, two-layer slats (one fixed and one movable) were implemented to provide the required range of slat depth to model most BLs. This system only involves slat movement to change the BL, which is very useful for automatic wind tunnel testing of tall buildings. The system was validated in phase III by conducting experimental wind tunnel testingof the system and comparing the resulting flow field with the target BL fields considering two length scales typically used for wind tunnel testing. A very good match was obtained for all wind field characteristics which confirms accuracy of the system.