• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.66-66
• /
• 2001

Since the first birth of pig derived from embryonic cells by nuclear transfer, many researches to produce cloned pig have been carried out. Recently, two reports about the birth of somatic cell cloned pigs using in vivo oocytes and also Betthauser et al. (2000) reported the birth of somatic cell cloned pigs using in vitro oocytes. So here we investigated the effect of activation method and culture medium on in vitro development of porcine nuclear transfer embryo using fetal fibroblast. Oocytes derived from slaughter house obtained ovaries were matured for 42 to 44 h in TCM 199. Matured oocytes were denuded using 0.1% hyaluronidase and then Oocytes with the first polar body were used for enucleation by aspirating the first polar body and adjacent cytoplasm in TCM 199 supplemented with 7.5 $\mu\textrm{g}$ cytochalasin B. Petal fibroblast cells were prepared from 35 days old fetus. To be used as donor cells, fetal fibroblast cells were serum starved for 3 to 5 days and then isolated into single co:1 by trypsinization. Nuclear transfer embryos were fused using 2 times 1.25㎸ for 30$mutextrm{s}$. Fused NT embryos were activated with calcium ionophore (CI) and 6-dimethyl-aminopurine (6-DMAP). Activated oocytes were cultured in NCSU 23 or BECM 3 for 6 days. There was no significant difference between chemical activation and no chemical activation for blastocyst development rate(11.6 vs. 14.8%). However, cell number was significantly higher when NT embryos were activated with CI and 6-DMAP (31.2 vs. 22.6). When NT embryos were cultured in NCSU 23 or BECM 3, blastocyst development rate was 16.4 and 13.2%, respectively, and cell number was 31.5 and 24.1, respectively. These results suggest that chemical activation after fusion and culture in NCSU 23 could increase cell number of porcine NT embryos.

• The Plant Pathology Journal
• /
• v.24 no.4
• /
• pp.439-446
• /
• 2008

A fungicidal spray program for effective control of three major apple diseases in Korea (white rot, bitter rot, and Marssonina blotch) was developed. This was based on our previous studies showing that application of ergosterol biosynthesis inhibitors (EBIs) in early or mid-August can eradicate white rot infection in fruit and that some protective fungicides show after-infection activity against white rot. The basic spray program focused on control of white rot, the main target disease, and the fungicides were sprayed at 15-day intervals from petal fall to late August using fungicides that show after-infection and EBI activity. The basic spray program was modified over 4 successive years to improve control efficacy against bitter rot and Marssonina blotch, which sometimes cause as much damage as white rot. Modifications to the regime were made every year by replacing one fungicide in the basic program at a specific spraying time. Substitution of only one fungicide in the spray program, even early in the growing season, greatly influenced the final disease incidence at harvest. Applying this principle, a moderately efficient spray program for cv. Fuji that increased the spray interval from 10 to 15 days and thus reduced the number of sprays required per crop season was developed.

• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.245-253
• /
• 2005

This study was carried out to determine the optimum EC supply by accumulation amount of solar radiation in closed system. EC concentration of drainage was higher than that of supply. The higher EC concentration of supply was, the lower pH of drainage was. It was no difference in the quality of cut rose 'Nobles' (Rosa hybrida), stem length, stem diameter, leaf number, petal length, and petal diameter by EC treatment by season. The yield was higher about $6\%$ in treatment of EC $1.3dS{\cdot}m^{-1}$ in April and May, about $10\%$ in treatment of EC $10dS{\cdot}m^{-1}$ in June, July and August, and about $10\%$ in treatment of EC 1.0 or $1.3dS{\cdot}m^{-1}$ in September and October than the others. In general, the yield of the cut rose was higher in treatment of (B) EC 1.3 mS/cm in spring, EC $1.0dS{\cdot}m^{-1}$ in summer, EC $1.3dS{\cdot}m^{-1}$ in autumn, and EC$1.6dS{\cdot}m^{-1}$ in winter.

• Korean Journal of Plant Resources
• /
• v.25 no.2
• /
• pp.293-297
• /
• 2012

A new asiatic lily cultivar 'Point' was derived from a cross between $Lilium$ $concolor$ var. $partheneion$ and 97-5 with orange colored petals made in 2000. The selection and the survey for the flower characteristics were conducted from 2005 to 2008 by using vinyl tunnels and greenhouse at Highland Agriculture Research Center, NICS, RDA. Based on flower color, 'Point' cultivar belongs to orange red group (O-R N30C). There was lots of spots in petal. The flowers had brown stigma and dark brown pollen. The stem color was dark purple. The flowering date was July 8. The plant height was 88.2 cm and flower numbers were 5.4 ea. The length and width of petal were 6.3 cm and 3.2 cm, respectively. The flower size was smaller than that of 'Prato' cultivar. The number of leaves was 12.2 ea. The length and width of leaves were 9.2 cm and 1.1 cm, respectively. The weight and circumference of bulb were about 24.6 g and 11.6 cm, respectively. 'Point' cultivar had resistance to bulb rot disease. The flowering duration was 16.1 days. The preference was good to 4.1 on 5 grades. 'Point' cultivar was registered as a new variety with No. 3446 in Korea Seed and Variety Service on April 2011.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.284-287
• /
• 2010

A new standard rose cv. 'Honey Lemon' was bred by the cross between white standard cv. 'Escimo' and light pink standard cv. 'Medeo' at the National Institute of Horticultural Research Institute. The cross was made in 1999 and 'Honey Lemon' was finally selected in 2003 after investigating characteristics for three years from 2001 to 2003. 'Honey Lemon', a white standard cultivar grows vigorously and has good flower shape. The major characteristics of this cultivar are $248.0stems/m^2/year$ in yield, 53.0 cm in length of cut flower, 8.0 cm in flower diameter, 17.0 in petal number, and 16.9 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar is relatively higher than that of control cv., 'Tineke'. (Registration number: 1151).

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.251-255
• /
• 2009

This study was conducted to investigate effect of ionic strength and feeding times of a nutrient solution on reduction of stem cavity size and improvement of flower quality in chrysanthemum 'Baekma'. A nutrient solution was applied with different strengths at three stages, namely, transplanting, budding, and flowering. The solution EC was adjusted as 1.61.82.0, 1.81.81.8, 1.82.01.8, and $2.02.02.0dS{\cdot}m^{-1}$ in four treatments. Feeding frequency per a day were 4 times for 12 min., 8 times for 6 min., 12 times for 4 min., and 18 times for 2.7 min. each. Cut flower length as affected by different strengths of a nutrient solution was the greatest in the plot of EC $2.02.02.0dS{\cdot}m^{-1}$. However number of leaves, stem diameter, and leaf size were greater in EC $1.82.01.8dS{\cdot}m^{-1}$ than in other treatments. Also, petal number of petals was the greatest and stem cavity size was the smallest in the plot of EC $1.81.81.8dS{\cdot}m^{-1}$. Plant height, number of leaves, stem diameter, leaf size were greater in the plot with 12 times feed ing per a day. number of petal was most in the plot with 8 times feeding per day, while stem cavity size was the smallest in the plot with 12 times feed ing per a day. Therefore, the better plant growth, the smaller stem cavity size.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.128-136
• /
• 2009

To obtain pure lines for breeding $F_1$ varieties of spreading surfinia and wave petunia, Petunia ${\times}$ hybrida, 20 lines of surfinia petunia and 28 lines of wave petunia that were considered uniform in growth and flowering characteristics were selected by self-pollination of the fifth($S_5$) or the seventh generation($S_7$). The 20 selected lines of surfinia petunia had the branch number ranged from 6.0 to 11.0 cm, and the internode length ranged from 2.0 to 4.2 cm. Among them, ten lines, including '$Pe99-017^7$' were above 60 cm of plant width, above 300 leaves in a plant. Fourteen lines including '$Pe99-017^7$' were more than 150 in the number of flower. In the petal color, thirteen lines, including '$Pe99-017^7$', were red-purple; three, including '$Pe99-007^7$', were purple; '$Pe04-086^7$' and '$Pe04-159^7$' were violet; and line '$Pe072-1^7$' was white. Eight lines including '$Pe02-205-2^5$' ranged from 4.0 to 5.0 cm of flowers diameter, and seven lines including '$Pe04-086^5$' ranged from 3.0 to 4.0 cm of leaf length, which is relatively low. Germination rate of the lines was more than 50%. In the wave petunia, the branch number of the 28 selected lines ranged from 8.0 to 13.0 cm, and the internode length ranged from 1.0 to 3.2 cm, which is relatively higher than surfinia petunias. Among them, ten lines, including '$Pe99-020^7$' were above 60 cm of plant width, above 200 leaves in a plant. Twelve lines including '$Pe04-034-2^5$' were more than 150 in the number of flower. In the petal color, eighteen lines, including '$Pe99-020^7$', were red-purple; three, including '$Pe04-113-4^5$', were red; three, including '$Pe04-263^5$', were white; '$Pe04-201^5$' and '$Pe04-263^5$' were violet blue; and line '$Pe04-072-5^5$' was purple. Nine lines including '$Pe04-201^5$' ranged from 4.0 to 5.0 cm of flowers diameter, and eleven lines including '$Pe04-263^5$' ranged from 3.0 to 4.0 cm of leaf length, which is relatively low. All the lines with various growth and flowering characteristics would be very promising to use as breeding materials for $F_1$ hybrids of spreading petunia, Petunia ${\times}$ hybrida.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.3
• /
• pp.166-172
• /
• 2019

BACKGROUND: Increase in the ratio of small berries in blueberry production decreases the farmers' profits due to weakening market competitiveness and lowering harvest efficiency. One of the reasons for increased small berries is over fruit-load. For improving productivity and competitiveness of blueberry in Korea, hand-thinning can be applied to increase fruit quality before the developing adequate chemical thinning methods. This study was conducted to investigate the proper timing and methods for floral buds thinning in rabbiteye blueberry. METHODS AND RESULTS: Eight years old bushes of rabbiteye bluberries 'Brightwell' as a primary cultivar and 'Powderblue' as a pollinizer were used for this study. Fruit size distribution by leaf-to-fruit ratio was investigated by counting the number of leaves and fruits in canes of 127 'Brightwell' plants whose fruit set varied. Fifty percent of flowers/floral buds were removed in four different floral buds stages such as bud swell, late pink bud, full bloom, and petal fall, and the consumed time for thinning and fruit characteristics were recorded to investigate the effect and proper timing of floral buds thinning. Fruit weight and soluble solids content tended to increase in proportion to leaf-to-fruit ratio and the production of the number of fruits less than 13 mm in diameter decreased when leaf-to-fruit ratio was more than 2.5. Manual floral buds thinning by hands was fastest in full bloom stage and slowest in bud swelling stage. In all cultivars, fruit size was significantly smaller in non-thinning treatment than thinning, and there was, however, no significant difference in total fruit yield. The number of fruits less than 13 mm in diameter increased in both cultivars as floral buds thinning was delayed. Consumed time for picking 90% berries out of total berries per bush was shortest in full bloom stage thinning in 'Brightwell' and bud swelling, full bloom thinning in 'Powderblue'. These were 25 and 20 days faster than no thinning, respectively. CONCLUSION: Although the effect of floral buds thinning varied depending on the cultivars, our results confirmed that floral buds thinning was effective for the early intensive harvesting and the increase of the large fruit ratio and the harvesting productivity. Also, in order to increase thinning efficiency, it is recommended to remove the flower buds before the full bloom stage.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.3
• /
• pp.152-157
• /
• 2009

To obtain pure lines for breeding $F_1$ varieties of Primula malacoides, 10 lines that were considered uniform in growth and flowering characteristics were selected from self-crossings of the sixth generation ($S_6$). Plant height of the selected lines ranged from 20.8 to 33.2 cm, and number of leaves ranged from 33.6 to 54.2. The selected lines flowered at 181.4 to 207.8 days after sowing. Three lines, including 'PR-03-81', flowered in less than 190 days from sowing, while six lines, including 'PR-03-228', only flowered after more than 200 days from sowing. In terms of petal color, six lines, including 'PR-03-81', were pink, three, including 'PR-03-236', were purple, and line 'PR-03-275' was white. Flower diameter ranged from 2.4 to 2.9 cm, and number of pedicels per plant was between 15.4 and 26.4. Number of flowers per pedicel ranged from 20.2 to 30.2. Germination was more than 70%, and number of seeds per capsule (pod) ranged from 110.0 to 162.8. In summary, plant height was low and flower diameter was small and plants had many flowers and readily formed seeds. The selected lines are not only valuable as ornamental plants but could also be used as breeding materials for $F_1$ hybrids of Primula polyantha.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.299-302
• /
• 2014

A freesia (Freesia hybrida Hort.) 'Shiny Bell' was developed for the cut flower in the National Institute of Horticultural Herbal Science in 2012. This hybrid was selected from a crossing between cn. 'Teresa' and 'Rossini', which is white semi-double flowering and red double flowering, respectively. in 2004. Morphological characteristics of the selected hybrid were investigated for 3 years from 2009 to 2011, and then it was named 'Shiny Bell'. 'Shiny Bell' had red color of RHS W155C, and double flower. The growth of the plant was vigorous and the average height was 109.3 cm. The average flower width was 5.8 mm, number of floret per stalk was 11.3, and stalk length was 8.5 cm. The average yield, 7.3 Branches per plant, was 3 stems per plant more than the control cultivar. The average days to first flowering of 'Shiny Bell', was 143.3 days, and it was approximately 7 days later than the control cultivar. The average yield of 'Shiny Bell' was 4.0 cormlets per plant.