• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.106-114
• /
• 2020

It is very important for beginners in networking to build, test, and operate an IP network system, which is the key infrastructure of the fourth industrial revolution. An IP network system consists of the IP network itself, covering both the internet and underlying layers, plus the basic network system supporting fundamental network services, with a DNS, the DHCP, email, WWW, and application service systems, such as VoIP. This paper suggests an open software-based practice platform with a minimal network configuration on which beginners can practice on nearly all of the IP network system, and it presents a practice scenario and results. In addition, it adds both IP address allocation and routing table manipulation functions to the network simulator software, which will allow beginners to learn table-based datagram routing schemes in advance. This platform may be useful for networking beginners in order to practice on an IP network system on their own personal computers without additional equipment and costs.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.19-22
• /
• 2002

In this paper, we aims to develop a microcontroll er-based ECG monitoring system and portable pulse oximeter using Compact Flash Interface. First, portable pulse oximeter system is designed to record 2 channel of biosignals simultaneously, including 1 channel of $SpO_2$ and 1 channel of pulse rate. It is very small and portable. Besides, the system makes it possible to measure a patient's condition without an additional medical equipment. We tried to solve the problems generated by a patient's motion. That is, we added an analog circuit to a traditional pulse oximeter in order to eliminate the change of the base line. And we used 2D sector algorithm. As present, SpO2 modules are completed. But there are still many further development needed in order to enhance the function. Especially, compact falsh interface remains the most to complete. Second, ECG monitoring system uses almost same as present 3-lead ECG system. But we focus on the analog part, especially in filter. The proposed filter is composed of two parts. One is a filter to remove the power-line interface. The other is a filter to remove the baseline drift. A filter to remove the power-line and the baseline drift is necessarily used in the ECG system. The implemented filter have three features; minimizing the distortion in DC component, removing the harmonic component of power-line frequency. Using compact flash interface, we can easily transfer a patient's personal information and the measured signal data to a network based server environment. That means, it is possible to implement a patient's monitoring system with low cost.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.79-92
• /
• 2002

This paper describes a research work of developing computer-aided design of a product with bending and piercing for progressive working. An approach to the system for progressive working is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, strip layout and die layout modules. The system is designed by considering several factors, such as bending sequences by fuzzy set theory, complexities of blank geometry, punch profiles, and the availability of a press equipment. Strip layout drawing generated in the strip layout module is presented in 3-D graphic farms, including bending sequences and piercing processes with punch profiles divided into for external area. The die layout module carries out die design for each process obtained from the results of the strip layout. Results obtained using the modules enable the manufacturer for progressive working of electric products to be more efficient in this field.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.334-343
• /
• 1996

Quality evaluation for food and agricultural products have always been one of the most elusive problems associated with the handling , processing and marketing in a food plant production. In order to detect physical foreign materials in food and agricultural products, non-destructive techniques have been developed for many years. Application of X-ray system to detect physical foreign materials in food and agricultural products could be considered to be a high potential method. Especially , it is impossible to detect internal physical foreign materials by visual inspections. In this study, it was tried to be applied for two different X-ray devices. Soft X-ray system with CdTe sensor and X-ray CT scanner were evaluated for advantage of the detection of non-meltallic foreign materials in food and agricultural products . Though the soft X-ray is not a high energy radiation, it is possible to detect small different density in a material. The CdTe sensor has a high resolution for t e soft X-ray energy region. The density characteristics of foods and foreign material were expressed region. The density characteristics of foods and foreign materials were expressed as a soft X-ray energy spectrum. The energy spectrum was analyzed by a personal computer with a multi-channel analyzer. X-ray CT scanner can provide visual image and analyze by three dimensional information inside food and agricultural products. The X-ray CT scanner using as a medical equipment was used to detect a foreign material. The density characteristics of food and foreign materials in food were tried to be detected by the threshold value on the basis of the CT numbers. The soft X-ray absorption characteristics for acrylin plates and distilled water were obtained and could be found the possibility of detecting a small physical foreign materials such as a plastic wrapping film , a stone and grasshopper in food and agricultural products.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.135-147
• /
• 2020

PURPOSE: The purpose of this paper is to provide a review of physiotherapy intervention for patients with COVID-19 during their hospital admission and post-discharge. METHODS: The recommendations and guidelines of physiotherapy management, medical management, and general information of the WHO, Australian Physiotherapist, European Respiratory Society, British Thoracic Society, and American Thoracic Society were reviewed. RESULTS: This paper contains general information on COVID-19, including medical management, and the importance of physiotherapy approaches including an assessment of the patients' function, such as the 6-minute walking test, five sit to stand or sit to stand for one minute to measure their function as their recovery journey. The patients' quality of life, anxiety, and depression should be considered. Physiotherapy management should be based on an assessment of the patient's presenting impairments, including inclusion and exclusion of physiotherapy intervention. The paper also approaches step by step with the disease progress, from an intensive care unit, the general ward in the acute phase, through to the rehabilitation ward if needed, and post-discharge as an outpatient.. CONCLUSION: The paper has a limitation due to the unknown factor of the natural history of COVID-19. Depending on the patients' recovery journey and the rehabilitation needed, any physiotherapy interventions should focus on what the patients' need on their journey to recovery, e.g., pulmonary, cardiac, neurological, and general rehabilitation. In addition, applying personal protection equipment for treating physiotherapists is a mandatory requirement because this protects from the transmission of COVID-19.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.473-476
• /
• 2012

The PET-MRI which has been installed and being managed recently uses both magnetic field and radiation. Most radiation workers wear a thermoluminescenct dosimeter (TLD) as a personal radiation dosimeter, and the TLD is affected both by a magnetic field and radiation. In this research, the same amount of X-ray was applied to 36 TLDs, and the changes in the dose of the 32 TLDs exposed to magnetic field at the location where its intensity of the magnetic resonance imaging (MRI) was about 5000 Gauss for eight hours with one-hour unit and that of the four TLDs not exposed to magnetic field were compared and checked. The measurement result showed that exposure dose of the TLD attached to the MRI changed irregularly depending on the amount of exposure time. Therefore, the TLD whose amount of changes little in the environment of a MRI is demanded to be developed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.4
• /
• pp.389-395
• /
• 2016

Objectives: Acute methanol poisonings known to be typical occupational diseases occurring in developing countries broke out in sub-contract manufacturers in the early 2016. The present paper attempted to identify underlying causes which hide under apparent findings, and suggest alternative policies to prevent recurrence of similar intoxication Methods: We evaluated occupational health and safety characteristics of workers in micro-enterprises similar to workplaces with methanol poisoning by in depth-interview of employers, workers, and labor inspectors, and literature review. Results: The common findings of workplaces with methanol poisoning were addressed; First, the victims were illegal agency workers. Second, the workplaces were sub-contract micro-manufacturers with less than 5 employees. Investigators found that local ventilations did not work, while most of workers did not wear any proper personal respiratory protective equipment in the workplace. In addition, periodic environmental monitoring and medical check-ups were not done. However, these apparent findings do not appear to be root causes of methanol poisoning. Our in depth-analysis clarified a root cause; micro-enterprises with less than 5 employees are exempted with essential regulations of OSH Act, and employers do not know about OSH Act. Conclusions: We suggest occupational health policies to prevent recurrence of similar intoxication; First, government should introduce programs so that all employers should know about employers' responsibilities in OSH Act from the start of business. Second, even manufacturers with less than 5 employees should not be exempted with essential regulations of OSH Act. Finally, employers should take responsibilities for health and safety of all the workers including agency workers working in workplaces.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.11
• /
• pp.1672-1681
• /
• 2002

To evaluate the thermal environments and the workload of farmers in the rice field in summer, this study investigated rice farmers' physiological, psychological responses, work postures, work clothes, air temperature and air humidity during the spraying pesticide in the rice field. Five career farmers (3 males, 2 females) volunteered as the subjects. During the spraying pesticide in the rice field, physiological responses were monitored continuously. The results were as follows. l. Farmers wore only raincoats not pesticide-proof clothing. 2. The value of WBGT, rectal temperature($T_{re}$), mean skin temperature(${\={T}}_{sk}$) were $24.9∼28.9^{\circ}C,\;37.8({\pm}0.3)^{\circ}C\;and\;33.6({\pm}0.6)^{\circ}C$, respectively. Clothing microclimate temperature($T_{cl}$) on the chest and back were $32.5({\pm}2.6)^{\circ}C\;and\;33.6({\pm}2.6)^{\circ}C$, respectively(p<0.00l). Humidity inside of the clothing ($H_{cl}$) was over 80%RH and heart rate(HR) was 112(${\pm}27$)bpm. We evaluated that the spraying pesticide was 'heavy work' by the Tre and HR. To four subjective questionnaires, all farmers expressed 'hard, hot, humid and uncomfortable' without individual difference at the end of works. We suggested that 1) the spraying pesticide in the rice field was a heavy work, 2) because the workload of farmers in the raincoat/pesticide-proof clothing can't be evaluated by only WBGT, assessors should measure physiological, psychological responses as well as thermal environments, 3) to alleviate farmers' heat strain, clothing manufacturers must consider not only the improvement of textile materials and clothing weight but also the designing of personal cooling equipment.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.4
• /
• pp.463-470
• /
• 2014

Objectives : The purpose of this study was to investigate the association factors of infection control practice based on health belief model in the dental hygienists in dental clinics. Methods : A self-reported questionnaire was filled out by 278 dental hygienists in 160 dental clinics in Gwangju by a proportional stratified sampling method from September 13 to October 7, 2013. Data were analyzed by t-test, ANOVA, correlation analysis, and multiple regression analysis using SPSS version 12.0. Results : In multiple regression analysis, practice scores were significantly higher in aged dental hygienists and those who took infectious disease history from the patients before treatment. With regard to health belief model, perceived barrier was negatively associated with the practice(${\beta}$=-.16, p<.001), importance of infection control in hand hygiene(${\beta}$=.14, p=.026), and use of personal protective equipment(${\beta}$=.17, p=.043). The intention of action was positively associated with the practice(${\beta}$=.13, p=.002). Conclusions : This study will provide the basic evidence for the quality improvement of infection control and prevention. So the dental hygienists will be able to put into practice in infection control management.

• Korean Journal of Occupational Health Nursing
• /
• v.15 no.1
• /
• pp.5-13
• /
• 2006

Purpose: The research were conducted to identify the knowledge, attitude and the preventive behaviour of noise according to noise-induced hearing loss prevention education and to provide primary data for effective noise-induced hearing loss prevention education for noise-exposed workers. Method: 104 noise-exposed workers were included in this study. The instrument used in this study was knowledge, attitude and preventive behavior of noise tool by Lee & Lee(1996). The first data were collected before the noise education from August to September, 2002. During 6 months, the education was provided, and then the second data were collected from April to May, 2003. Data were analyzed by SPSS 10.0 win program for finding frequency, percentage, mean, standard deviation, t-test, and ANOVA. Results: The results of this study were as follows: There were statistically significant differences of knowledge and attitude of noise related education level, and adhesion quality of wearing ear protection equipment after noise education. Also, otitis media's history, received education of the personal protective devices for the hearing conservation was significant in the preventive behaviour of noise. Conclusion: In conclusion, the noise-induced hearing loss prevention education was effective in changing the knowledge, attitude and the prevention behaviour of noise. Therefore, the noise-induced hearing loss prevention education is strongly recommended for noise-exposed workers and it will be necessary repeated education for changing prevention behaviour of noise.