• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.4
• /
• pp.437-442
• /
• 1997

An experimental study was carried out in a channel cavity with square heat surface by visual¬ization equipment with Mach - Zehnder interferometer and laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two¬frame grey-level cross correlation algorithm. Heat source was uniform heat flux(o.4W/cm$^2$, , O.8W/cm$^2$, 1.2W/cm$^2$). Obtained result showed various flow patterns such as kinetic energy distribution. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach ~ Zehnder are also compared in terms of constant heat flux.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.501-504
• /
• 2012

Personal Information Protection Law and Information Communication Network Law is administered from March, 2012 and August, 2012. It is very important to protect and manage the key well so that the third party doesn't know the key. Thus, at present, there increases an importance of Key Management Server. Key Management Server is an appliance type of hardware equipment which can securely store and manage encryption and decryption key. In this paper, we will survey on foreign key management server products and discuss about the necessities of legislation of related law and establishment of policy.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.4
• /
• pp.103-106
• /
• 2015

The importance of disease prevention and risks of infection for funeral workers is present but it has not been studied about disease prevention of funeral workers in Korea. Health cares of funeral workers in Korea live in poor surroundings, because it depends on only effort of Funeral home or workers. And nationwide survey and guideline made for the infection of funeral workers almost do not exist. We propose the guideline about high infectious disease, personal hygiene, physical and spatial management in Korea. We aim to exploit the guidelines in the control, or ideally the eradication, of the disease or infection conditions we are considering. This guidelines contain a guide to funeral director's control procedures and equipment for infectious disease.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.3
• /
• pp.343-354
• /
• 2017

Objectives: The purpose of this study was to provide a satisfactory and reliable dental care service for the patients and to establish a plan to raise the perception about dental infection control. Methods: The perception of infection control in the dental clinic of the patients was examined who visited to dental clinics, over 20 years old and living in Seoul and Gyeonggi province since December 2016. The questionnaire was used as the survey tool, and 274 questions in the questionnaire were analyzed. Results: Results of examined factors affecting the perception of dental infection control in dental clinics show that the perception of infection control in dental clinics is affected by the degree of university graduates (p<0.05), full-time workers (p<0.01), housewives (p<0.001), and oral health concerns (p<0.05), the perception of infection control of dental medical personnel (p<0.001) in order. Conclusions: Dental medical personnels must thoroughly wash their hands, wear uniforms, wear personal protective equipment, and thoroughly clean and disinfect the interior of a dental clinic.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.123-132
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from pasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64). Transference of data between AutoCAD and I-DEAS Master Series Drafting is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of five modules, which are input and shape treatment, production feasibility check, strip-layout, data-conversion and die-layout modules. The process planning and Die design system is designed by considering several factors, such as complexities of blank geometry, punch profiles, and the availability of a press equipment and standard parts. This system provides its efficiecy for strip-layout, and die design for lead frame, semiconductor.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.193-198
• /
• 2004

This is the dissertation of the study of design characteristics about the practical flexible manufacturing system (PFMS). The basic ideas to analyze the manufacturing system which is the automatically operated is dependant on the various manufacturing procedures in factory. PFMS is the very useful equipment for students and trainee of production lines. This system is composed of hardware and software sub systems i.e. control and test unit and personal computer with software. The PFMS can be developed with design concepts and approved the capability of first article with functional tests. The PFMS module will be very useful for the manufacturing drill system in universities and practical fields. The flexible manufacturing systems have various subsystems appropriated for the final manufacturing products. Therefore the systems have the various kinds of hard wares as well as softwares. We study the software for the practical flexible manufacturing system designed in the Halla University and specially the design concept and using specification of the SCARA (Selective Compliance Assembly Robot Arm) robot which is used for the movement of the product is analyzed and introduced in this dissertation.

• The Journal of Korean Physical Therapy
• /
• v.23 no.3
• /
• pp.57-63
• /
• 2011

Purpose: The purposes of this study were to investigate the effectiveness of Pilates exercise on Fitness Factors related to motor performance including flexibility, agility, power, balance, and muscle endurance. Methods: Forty subjects were randomly allocated to one of two groups. The Pilates group did Pilates exercises 3 times a week for 8weeks, 60 minutes each time, and submitted to evaluation of protocols to assess sitting and reaching tests, a standing broad jump test, a side step test, a balance test using a Biodex Stability System, and muscle endurance using CSMI. Results: The Pilates group (n=20) participated in Pilates exercises three times in a week for eight weeks. The results show significant post-test differences in the Pilates group in the following areas: flexibility, agility, power, balance and muscle endurance. There was no significant increase in the control group. Post-exercise, there was no significant difference between the Pilates and control group. Conclusion: The Pilates method can offer significant improvement in personal flexibility, agility, power, balance, and muscle endurance. This study suggests that individuals can improve their Fitness Factors related to motor performance using Pilates exercises that do not require equipment or a high degree of skill. Further study is required to quantify the benefits of Pilates exercise.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.59-67
• /
• 2013

The odor occurring in the sewage system induces the displeasure, the disgust such as the headache, the vomit, etc. and increases the spiritual stress and disturbs the pleasant life of residents. These odors occur mainly in the area of combined sewage system treatment, being created in the personal sewage treatment plant such as septic tank and are incoming to sewage pipes and emitted to the outside through the manhole and the receiver, etc.; and this causes odors to the people. The Hydrogen Sulfide, the Methyl Mercaptan, the Ammonia, etc. are materials causing the odor, the more serious issue of odor is occurring since the septic tank of degradation process is being applied. The primary cause of odor is the decomposition of human feces in the septic tanks and sewage disposal facilities. The purpose of this study is reduction of hydrogen sulfide using air supplying and SOB(Sulfur-Oxidizing Bacteria). As a result of this study of the air supply system and the SOB media equipment by air supply, in case the air is injected to SOB media compared to the injection of air only, the removal efficiency the hydrogen sulfide was average 3.4 times higher.

• The Korean Journal of Food & Health Convergence
• /
• v.5 no.6
• /
• pp.11-16
• /
• 2019

The construction environment has been declared as a hazard prone area due to high number of accident and death. The study aims to identify influential factors that contribute to poor safety practices and its consequences on construction workers in Cape Coast Metropolis. Seventy respondents were taken as the sample size for the study. Descriptive analysis was used to analyze the data obtained from the field. Findings show that poor site management, working without safety gadgets, failure to use their Personal Protective Equipment (PPE) and negligence of workers were the main causes of accidents on sites. Poor site management had the highest ranking among the seven variables. Effects of poor safety practices on building construction site and delays in work execution were due to injury of workers, extra cost due to payment of compensation to injured victims, not motivated due to injury of worker and declined reputation of firm. Management team should motivate workers for safe work done, provide adequate PPE for their workers on site and have documented health and safety policy on site. Site authorities and management team should be on site regularly to ensure proper safety practices on construction site.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.1
• /
• pp.79-87
• /
• 2000

This study analyzed the regulations concerning odor management or control in Korea, Japan, and developed countries such as USA and Germany. The Korean restriction standards and measurement methods for offensive odor substances are very similar to the Japanese standards and methods promulgated in 1976. Japan promulgated the odor control act and the specific measurement methods of the offensive odor substances in 1973. In Japan, currently, the local governments can establish their own odor restriction areas and proclaim their own standards suitable for their situations. Also, Japan has more strict regulations and more offensive odor substances to be monitored than Korea. The restriction standards of odor in German is quite similar to the permissible limits and standards of air pollutants at emission sources in Korea. Many states in USA are adopting their own restriction standards and measurement methods, e.q., the ambient air pollution standards, organic functionstest methods by dilation, and establishment and addition of air pollution control equipment at emission sources. Finally, this study analyzed the problems of the regulations, standards, and measurement methods concerning the Korean offensive odor management. Since the direct organic fuctions measurement(DOFMM) method is depending upon the personal sensitives of odor substances, the measurement odor value can be equivocal. That is, the odor measurement value by an examines can differ from that by the other examines. Also, there can be conflicts with the measured odor values depending upon the applied measurement methods, e.q., the DOFMM, the dilation method, and the instrumental analysis method.