• 제목/요약/키워드: permittivity characteristic

검색결과 50건 처리시간 0.025초

H-모양 공진 개구를 이용한 평면 기판의 유전율 특성 분석 (Permittivity Characteristic Analysis of Planar Substrates Using H-shaped Resonant Aperture)

  • 여준호;이종익
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.55-56
    • /
    • 2018
  • 본 논문에서는 H-모양 공진 개구를 이용한 평면 기판의 유전율 특성 분석 방법을 제안하였다. 이를 위해 마이크로스트립 전송선로의 접지면에 H-모양 공진 개구를 추가하여 대역 저지 필터를 생성하였다. 마이크로스트립 전송선로의 접지면 뒤에 2 mm 두께의 평면 기판을 놓고 기판의 유전율 변화에 따른 공진주파수의 변화를 조사하였다. 기존의 상보 분할 링 공진기 구조를 사용하였을 때와 비교하여 기준 공진주파수에 대한 주파수의 변화 비가 커짐을 알 수 있었다.

  • PDF

The Characteristic Analysis of the Cross-shaped Microstrip Slot Antenna with the Reflector for Permittivity and Height of Dielectrics

  • Jang, Yong-Woong;Shin, Ho-Sub;Oh, Dong-Jin
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 ITC-CSCC -1
    • /
    • pp.183-186
    • /
    • 2000
  • We analyzed the cross-shaped microstripline-fed slot antenna with the reflector using FDTD(Finite-Difference Time-Domain) method in this paper. The proposed antenna uses RR Duroid-5880 substrate(relative permittivity 2.2 and height(1.578 mm) of dielectrics), and compares the optimized results of other kind substrates. The maximum bandwidth of the proposed antenna is from 1.91 GHz to 5.21 GHz, which is approximately 1.437 octave for the VSWR $\leq$ 2. It was found that the bandwidth of the antenna depend highly on the length of the horizontal and vertical feedline as well as the offset position of the feedline. The experimented data for the VSWR and the radiation pattern of the antenna are also represented.

  • PDF

지중배전케이블에서 반도전층을 고려한 주파수 응답 및 전파특성 분석 (Analysis of Frequency Response Characteristic Considering Semiconducting Screen in Underground Distribution Cables)

  • 정채균;이종범;김정태
    • 전기학회논문지
    • /
    • 제61권8호
    • /
    • pp.1091-1098
    • /
    • 2012
  • This paper describes frequency response and propagation characteristics considering semiconducting screen in distribution cables. In CIGRE WG 21-05, Simplified Approach(SA) and Rigorous Approach(RA) which can revise the permittivity considering semiconducting screen propose for more detailed EMTP model and frequency dependant analysis. In this paper, the frequency dependent characteristics of complex permittivity are variously analysed by cole-cole function of RA. The attenuation, propagation velocity and surge impedance according to frequency range(1 kHz to 500 MHz) and cable length are also analysed by SA and EMTP simulation in distribution cables. The propagation velocity considering semiconducting screen is slower, and it is saturated over the range of 1 MHz. The signal is significantly attenuated as frequency range is high.

유전가열을 이용한 식품살균장치의 온도특성 해석 (Temperature Characteristic Analysis of Food Steriliaztion Apparatus using dielectric heating)

  • 이달은;주경돈;김태진;조기연;백수현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 B
    • /
    • pp.1187-1189
    • /
    • 2003
  • With development of Circuit technology, accuracy of dielectric or induction healing apparatus was developed. This study aims at realization of food insecticidal apparatus using dielectric heating. Equipment to measure gram's permittivity or vermin's permittivity and expectation for heating temperature by computer simulation is necessary for construction of the system. And the effect of extermination of vermin for food was confirmed by experiment using the system.

  • PDF

마이크로스트립 미앤더 선로의 신호 왜곡 현상 연구 (The Study on Signal Distortion of Meander-shaped Microstrip Line)

  • 두진경;홍영표;김정민;육종관
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.197-202
    • /
    • 2005
  • In this paper, we analyzed the signal distortion incorporating meander-shaped transmission line on PCB in broadband frequency range, up to 50GHz. This broadband characteristic provides reasonable analysis of digital pulse having very short rising time. Simulation results reveal suppression characteristic at multiband which is dependent on only the width of meander arm. This width of arm also can be adjusted using different permittivity because it provides different effective wave-length. It is found that the suppression characteristic shows sharpness with as a function of the number of arms. However, these characteristics shown limitation for microstrip line structure rather than for stripline structure, so we can avoid these unwanted phenomena using stripline structure.

  • PDF

구형 및 가우시안 펄스신호의 마이크로스트립 선로상 전파특성 해석 (Propagation Characteristic Analysis of Square and Gaussian Pulse Signals on the Microstrip Line)

  • 박순근;김남;이승엽;최중현
    • 한국전자파학회논문지
    • /
    • 제7권5호
    • /
    • pp.384-394
    • /
    • 1996
  • 펄스가 갖는 주파수 범위, 정확도 및 마이크로스트립 선로의 기하구조 등을 고려한 가장 믿을만한 기존의 모텔 을 이용하여 마이크로스트립 선로상의 가우시안 및 구형 펄스신호의 전파특성을 해석하였다. 펄스신호의 시간영역의 응답을 보기위하여 비교적 정확성을 잦고 시율레이션하기에 편리한 수치적분볍음 이용하였으며, 마이크로 스트립 선로의 비유전율$\varepsilon_r$, 기판두께 h, 스트립폭W 그리고 신호펄스의 펄스폭 $\tau$ 등이 분산에 미치는영 향을 분석하였다. 그 결파 비유전율과 w/h 비가 작을수록 펄스선호의 분산에 유리하며, 작은 대역폭을 갖는 펄스신호가 분산이 적 게 얼어난다. 본 논문의 결과는 MIC 및 MMIC 회로의 설계시 마이크로스 트립 선로의 비유전율, 기판두께, 스트립폭 그리고 신호 펄스의 펄스폭 등의 trade-off 결정에 적합하다.

  • PDF

유전체 렌즈가 삽입된 고이득 Corrugated 혼 안테나 (A High Gain Corrugated Horn Antenna with Dielectric Lens)

  • 이호주;최재훈
    • 한국전자파학회논문지
    • /
    • 제27권5호
    • /
    • pp.486-489
    • /
    • 2016
  • 논문에서는 corrugation 구조의 적용과 PTFE 테플론(비유전율=2.1) 유전체 렌즈의 삽입을 통하여 우수한 임피던스 매칭 특성과 고이득 성능을 가지는 corrugated 혼 안테나가 제안되었다. 제안된 안테나는 X 밴드(8~12 GHz)에서 -25 dB 이하의 측정 반사손실 성능을 가지고, 중심 주파수인 10 GHz에서 최대 이득이 22.3 dBi이며, 안테나의 전체 크기는 $110mm{\times}110mm{\times}135mm$이다. 제안된 안테나의 성능을 고려하였을 때, 레이더식 레벨 트랜스미터 시스템에 삽입되기에 적합하며, 특히 LNG 및 LPG와 같이 낮은 비유전율 및 반사율을 가지는 물질이 저장된 선박 혹은 해양플랜트 내부의 가스탱크에 적용될 수 있을 것으로 사료된다.

테이퍼형 임피던스 정합선로의 설계를 위한 역산란 이론의 응용 (Application of the Inverse Scattering Theory to the Design of the Tapered Impedance-Matching Line)

  • 송충호;이상설
    • 한국전자파학회논문지
    • /
    • 제12권7호
    • /
    • pp.1139-1146
    • /
    • 2001
  • 일차원 매질에 대한 역산란법을 이용하여 테이퍼형 임피던스 정합선로를 설계한다. 역산란법으로 유전율 분포를 추정하는 과정에서 오타를 줄이기 위하여 위상 보정인자(PCF: Phase Compensation Factor)를 도입한다. 설계하고자 하는 정합선로와 동일한 반사특성을 갖는 가상(virtual) 일차원 유전체의 유전율 분포를 추정하여 정합선로를 합성한다. 이 설계법은 등가회로에 대한 회로망 이론을 적용하지 않고 임의의 대역 특성을 갖는 정합선로를 설계할 수 있다. 주파수 영역의 반사계수를 사용함으로써 시간 영역의 반사계수를 사용하는 설계법에서 필연적으로 나타나는 오차를 피할 수 있다.

  • PDF

Active GNSS Antenna Implemented with Two-Stage LNA on High Permittivity Substrate

  • Go, Jong-Gyu;Chung, Jae-Young
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권5호
    • /
    • pp.2004-2010
    • /
    • 2018
  • We propose a small active antenna to receive Global Navigation Satellite System (GNSS) signals, i.e., Global Positioning System (GPS) L1 (1,575MHz) and Russian Global Navigation Satellite System (GLONASS) L1 (1,600 MHz) signals. A two-stage low-noise amplifier (LNA) with more than 27 dB gain is implemented in the bottom layer of a three-layer antenna package. In addition, a hybrid coupler is used to combine signals from pair of proximately coupled orthogonal feeds with $90^{\circ}$ phase difference to achieve the circular polarization (CP) characteristic. Three layers of high permittivity (${\varepsilon}_r=10$) substrates are stacked and effectively integrated to have a small dimension of $64mm{\times}64mm{\times}7.42mm$ (including both circuit and antenna). The reflection coefficient of the fabricated antenna at the target frequency is below -10 dB, the measured antenna gain is above 26 dBic and the measured noise figure is less than 1.4 dB.

PBDG의 유전현상에 관한 연구 (A Study on the Dielectric Phenomenon of PBDG)

  • 송진원;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
    • /
    • pp.362-365
    • /
    • 2002
  • This paper, experiment manufactures device of Metal/Poly-${\gamma}$ Benzyl $_D$-GlutamateOrganic Films/Metal structure using PBDG and I-V properties and C-F properties. The I-V characteristic is measured that approve voltage from 0 to +2[V] of device and the distance between electrode is larger, could know that small current flow and thin film could know that had insulation property. C-F characteristic has each other affinity between the polarization amount and frequency. Permittivity of MIM device could know by dipole that is voluntary polarization of LB film that polarization is happened. The capacitor properties of a thin film is better as the distance between electrodes is smaller.

  • PDF