• 패션비즈니스
• /
• 제12권3호
• /
• pp.116-135
• /
• 2008

To investigate the actual distribution condition and clothing construction factors of the working clothes supplied to the Changwon national industrial complex, 5 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock in the industrial complex located in Gyeongsangnam-Do were selected. The questionnaire designed for the research consisted of working clothes distribution policies in manufacturing industry and the actual conditions of the design facts, repair and maintenance of the working clothes, etc. The analysis of the clothing construction factors of the working clothes provided by 5 respondent companies were conducted in parallel. The results derived from the study were as follows: The basic types of working clothes were the blouson jacket and straight pants; safety equipments for manufacture were safety helmets, gloves, snickers, goggles, masks, ear caps, wristlets, leggings, apron, etc. The size-charts adopted by the participant companies were the small-medium-large and cm/inch measurement size systems. To solve wearer's dissatisfaction with the garment fit, certain clothing construction factors were used, e.g. strap bands and the elastic band on a waist band. The types of fabrics used for the working clothes were mainly polyester/cotton and polyester/rayon blended ones. Moreover, to provide with more air permeability to wearers, the warp knit material was used to construct the lining and the armpit or back bodice slits. Lock, two-thread chain, safety, overedge stitches were applied with flat, lap felled, French, superimposed, lapped, bound and edge finishing seams to construct the working clothes selected.

• 한국분말재료학회지
• /
• 제13권4호
• /
• pp.256-262
• /
• 2006

The amorphous $Fe_{73}Si_{16}B_7Nb_3Cu_1$ alloy strip was pulverized to get a flake-shaped powder after annealing at $425^{\circ}C$ for 90 min and subsequently ground to obtain finer flake-shaped powder by using a ball mill. The powder was mixed with polyimide-based binder of $0.5{\sim}3wt%$, and then the mixture was cold compacted to make a toroidal powder core. After crystallization treatment for 1 hour at $380{\sim}600^{\circ}C$, the powder was transformed from amorphous to nanocrystalline with the grain size of $10{\sim}15nm$. Soft magnetic characteristics of the powder core was optimized at $550{\sim}600^{\circ}C$ with the insulating binder of 3wt%. As a result, the powder core showed the outstanding magnetic properties in terms of core loss and permeability, which were originated from the optimization of the grain size and distribution of the insulating binder.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.121-126
• /
• 2005

Semicrystalline poly(ethylene terephthalate) (cPET)/amorphous poly(ethylene terephthalate) with isophthalic acid (aPET) blends with 100/0, 75/25, 50/50, 25/75, and 0/100 by weight ratios were dissolved in a mixture of trifluoroacetic acid (TFA)/methylene chloride (MC) (50/50, v/v) and electrospun via the electrospinning technique. Solution properties such as solution viscosity, surface tension and electric conductivity were determined. The solution viscosity slightly decreased as aPET content increased, while there was no difference in surface tension with respect to aPET composition. The characteristics of the electro spun cPET/aPET blend nonwovens were investigated in terms of their morphology, pore size and gas permeability. All these measurements were carried out before and after heat treatment for various blend weight ratios. The average diameter of the fibers decreased with increasing aPET composition due to the decrease in viscosity. Also, the morphology of the electrospun cPET/aPET blend nonwovens was changed by heat treatment. The pore size and pore size distribution varied greatly from a few nanometers to a few microns. The gas permeability after heat treatment was lower than that before heat treatment because of the change of the morphology.

• Clinical and Experimental Reproductive Medicine
• /
• 제27권2호
• /
• pp.133-144
• /
• 2000

Objective: Several water channels (aquaporins; AQP) that belong to the MIP (major intrinsic protein) family have identified. In the selected tissues including red blood cells or renal tubules, water movements are abundant and/or physiologically important. Unexpectedly, a high water permeability of human and ram sperm has been reported. Recent studies showed that AQP7 and AQP8 are present in testes, so that the high water permeability of human sperm suggested to be mediated by AQPs. Method: To identify the identity of aquaporins expressed in testes, RT-PCR was performed using degenerative primers, which were designed to correspond to highly conserved sequences surrounding the Asn-Pro-Ala (NPA) motifs in the aquaporins. New expressed AQP series were reconfirmed by immunohistochemical study using rabbit polyclonal antibodies. Results: DNA sequencing of PCR products revealed that AQP2 and AQP3 mRNA as well as AQP7 and AQP8 are expressed in human and rat testes. In human and rat testes, AQP2 are expressed in spermatozoa, interstitial cells and myofibroblasts and AQP3 are expressed in myofibroblasts of semineferous tubules on immunocytochemical stain. Conclusion: These results indicate that multiple aquaporins are expressed in testes, and that they may have important roles in the spermatogenesis and the germ cell function of testis.

• 대한토목학회논문집
• /
• 제31권1C호
• /
• pp.1-10
• /
• 2011

본 논문에서는 제방 제체 하부지반에 투수계수 차이가 많이 나는 투수층(전석층)이 존재하는 김포제방에서 발생한 파이핑 현상을 모형실험 중 하나인 원심모형시험을 이용하여 모사하였다. 또한 원심모형실험과 동일 조건을 대상으로 수치해석을 수행하여 원심모형실험 결과와 비교하였다. 우선, 김포 제방을 바탕으로 원심모형실험을 수행할 단면을 결정하고, 간극수압계를 매설한 모형 제방에서 원심모형실험을 수행하였다. 실험을 통해 대부분의 물이 전석층으로 흐르는 것을 확인 하였으며 그로 인해 파이핑 현상이 발생하였다. 비디오 카메라 영상을 통해 기존의 연구 결과와 같이 전석층과 제내지 측 지표면과 거리가 가장 짧은 부분에서의 파이핑 현상을 확인하였다. 간극수압계를 통해 획득된 수압 분포 특성도 전석층으로의 물의 흐름으로 인해 파이핑 현상이 발생한 것임을 확인시켜주었다. 수치해석 결과 또한 원심모형실험 결과와 동일한 위치에서 파이핑 현상이 발생하는 것을 확인하였다. 원심모형시험을 통해 제방에서의 파이핑 현상을 모사하였으며 추후 제방 연구에서 원심모형시험을 이용하여 다양한 실험 및 현상을 평가, 예측 할 수 있을 것이라 판단된다.

• 한국자기학회지
• /
• 제10권1호
• /
• pp.11-15
• /
• 2000

수분사법으로 제조된 13Cr-1.5Nb-Fe 합금분말을 수소분위기 하에서 환원처리 하였다. 분말특성이 조사된 환원분말을 이용하여 자기코아를 제작한 후 약 $10^{-5}$Torr의 진공분위기에서 소결하였다. 자기코아의 교류자기특성을 조사하기 위하여 투자율과 자기손실을 조사하였다. 환원분말의 입도분포는 약 70$\mu\textrm{m}$에서 50% vol.을 나타내며, 포화자화 값은 약160 emu/g이었다. 10ton/$\textrm{cm}^2$ 성형압력, 1,20$0^{\circ}C$ 소결온도에서 제작된 자기코아의 교류투자율은 주파수, f=1 kHz, 인가자장, H$_{a}$ =5 Oe에서 400이다. 또한 동조건에서 제작된 자기코아의 교류자기이력손실은 유도자화, B$_{m}$ =80G에서 0.12mW/cc이다.

• 한국식품과학회지
• /
• 제30권4호
• /
• pp.811-816
• /
• 1998

김치포장이 부풀지 않으면서 맛이 유지될수 있는 새로운 재질을 갖는 포장재를 개발하기 위해 식물 성장을 촉진시키는 생리활성능력과 항균력이 뛰어난 것으로 알려진 은처리한 소재를 LDPE필름에 충전하여 포장재를 만든후 김치를 포장하여 $20^{\circ}C$저장중 품질변화를 관찰하였다. 이 포장재는 이산화탄소가스와 에틸렌 투과도가 뛰어나 포장재를 부풀게 하지 않았으며 김치냄새방출도 은처리한 소재의 탈취효과로 인해 약간만 방출되었다. pH의 경우에는 김치맛이 가장좋은 $4.0{\sim}4.5$ 범위기간이 두배 이상 증가되었다. 젖산균의 수에 있어서도 미미하기는 하지만 LDPE의 경우보다 젖산균 성장이 지연됨을 보여주었다. 전체적인 평가로 판단해볼 때 은처리한 소재를 충전시킨 AC3O포장재가 LDPE포장재보다 김치저장특성이 뛰어나 김치맛이 상온에서 더 오랫동안 좋은 맛을 유지하였다.

• Geomechanics and Engineering
• /
• 제17권4호
• /
• pp.367-374
• /
• 2019

This study concluded the results of a research on the features of cement based permeation grout, based on some important grout parameters, such as the rheological properties (yield stress and viscosity), coefficient of permeability to grout ($k_G$) and the inject ability of cement grout (N and $N_c$ assessment), which govern the performance of cement based permeation grouting in porous media. Due to the limited knowledge of these important grout parameters and other influencing factors (filtration pressure, rate and time of injection and the grout volume) used in the field work, the application of cement based permeation grouting is still largely a trial and error process in the current practice, especially in the local construction industry. It is seen possible to use simple formulas in order to select the injection parameters and to evaluate their inter-relationship, as well as to optimize injection spacing and times with respect to injection source dimensions and in-situ permeability. The validity of spherical and cylindrical flow model was not verified by any past research works covered in the literature review. Therefore, a theoretical investigation including grout flow models and significant grout parameters for the design of permeation grouting was conducted in this study. This two grout flow models were applied for three grout mixes prepared for w/c=0.75, w/c=1.00 and w/c=1.25 in this study. The relations between injection times, radius, pump pressure and flow rate for both flow models were investigated and the results were presented. Furthermore, in order to investigate these two flow model, some rheological properties of the grout mixes, particle size distribution of the cement used in this study and some geotechnical properties of the sand used in this work were defined and presented.

• 한국지반공학회논문집
• /
• 제22권8호
• /
• pp.55-62
• /
• 2006

샌드매트의 설계는 연약지반의 압밀침하특성과 매트의 투수성이 상호 결합된 연성압밀해석에 의해 얻어지는 간극 수압거동에 의해 검토되어야 한다. 본 연구에서는 샌드매트의 수두분포에 대하여 Terzaghi 1차원 압밀방정식을 이용한 수치해석을 실시하여 준설모래를 샌드매트 재료로 이용한 성토모형실험의 결과와 비교분석하였다. 실험결과 단계 성토가 증가하면서 간극수압은 성토중심부에서 증가되는 침하량의 영향을 받고 있다. 그리고 잔류된 간극수압 영향으로 간극수압의 상승속도가 수치해석결과보다 지연되고 있다. 따라서 최종적으로 샌드매트 시공은 성토중심부에서 증가되는 동수구배를 저감시키도록 포설되어야 한다.

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.1-11
• /
• 2007

To prepare chemically stable asymmetric microporous membranes with a hydrophilic surface, which would be expected to have better antifouling properties, poly(vinylidene fluoride) (PVDF) blend membranes were prepared by the phase inversion process. PVDF mixture solutions in N-methylpyrrolidone (NMP) blended with several polar potential ionic polymers such as polyacrylonitrile (PAN), poly(methylmethacrylate) (PMMA) and poly(N-isopropylacrylamide) (NIPAM) were used for the formation of the PVDF blend membranes. They were then characterized with several analytical methods such as FESEM, FTIR, contact angle measurement, pore size distribution and permeability measurement. Regardless of different polar polymers blended, they all showed a finger-like structure with more hydrophilic surface than the pristine PVDF membrane. For all the PVDF blend membrane, due to the polar potential ionic polymers used, the flux of those was improved. Especially the PVDF blend membrane with NIPAM showed the highest flux among the membranes prepared. Also antifouling property of the PVDF membrane was improved by the use of the polar polymers.