• International Journal of Industrial Entomology and Biomaterials
• /
• 제13권2호
• /
• pp.97-101
• /
• 2006

The efficacy of wood ash from Terminalia arjuna (arjun) and T. tomentosa (asan) has been tested against virosis of tasar silkworm, Antheraea. mylitta D. The Polyhedral Occlusion Bodies (POBs) of Cytoplasmic Polyhedrosis Virus of A. mylitta (AmCPV) were exposed to the aqueous solution (0.5 to 4%) of wood ash for 5 to 30 minutes. The treated suspension of POBs was orally inoculated once to tasar silkworm larvae after 24 hours of $1^{st}$ moult, and larvae reared in indoor on arjun leaves till spinning. The application of aqueous solution of wood ash has established its potential as antiviral agent against cytoplasmic polyhedrosis virus. Two percent aqueous solution of wood ash from arjun and asan dissolved the Polyhedral Occlusion Bodies (POBs) of cytoplasmic polyhedrosis virus of tasar silkworm and inactivated the virions within a short period of 20 to 30 minutes. In vivo efficacy of aqueous solution of wood ash resulted in reduction of larval mortality due to virosis. The mortality was reduced to $2.56{\pm}0.21\;and\;3.03{\pm}0.32%$ when treatment of 2.0% solution of wood ash of arjun and asan respectively were applied for 20 minutes, compared to inoculated control $(92.18{\pm}7.52%)$. No mortality was recorded when treatment of 2.5% solution of wood ash of arjun and asan were applied for 10 minutes or more.

• 재활간호학회지
• /
• 제6권2호
• /
• pp.183-191
• /
• 2003

Purpose: To examine the effect of the solution-focused group counseling program on the nursing students' problem-solving capacity. Methods: The research design was one-group pretest-posttest design in quasi-experimental research. The subjects were 16 sophomore nursing students being in K university located in D city, Korea. The period of this research was from January 9 to February 20, 2002, from January 10 to February 21, 2003. The group counseling program that was developed by Kim, Hyeon Mi (2001) on the basis of the fundamental principles of solution-focused therapy of de Shazer, et al. (1986) and the solution-focused group counseling process proposed by Selekman (1991), LaFountain, et al. (1996) and Metcalf (1998) was used after being modified and complemented for the nursing students. The group counseling was carried out six times for 120 minutes per week. The instruments used for this study were the Problem Solving Inventory developed by Heppner and Petersen (1982) and Scaling question. Collected data were analyzed by paired t-test with SPSS program. Results: 1) Problem solving capacity increased after solution-focused group counseling program, but a significant difference was not revealed(t=0.835, p=0.057). 2) The scores of self-confidence with the problem-solving were significantly increased when it was compared with the 1st and the 6th(t=3.587, p=0.001). Conclusion: It seems that the solution-focused group counseling program should be considered as an effective nursing intervention program for the nursing students by improving self-confidence with the problem-solving. As a results, this study suggests that the specific techniques used in the solution focused therapy should be applied actively in areas of counseling and communication training for the nursing students and nurses.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권2호
• /
• pp.17-25
• /
• 2003

Simple methods are developed to predict temperatures of a satellite box during launch stage. The box is mounted on outer surface of satellite and directly exposed to space thermal environment for the time period from fairing jettison to separation. These simple methods are to solve a 1st order ordinary differential equation (ODE) which is simplified from the governing equation after applying several assumptions. The existence of analytical solution for the 1st order ODE is determined depending on treatment of time-dependent molecular heating term. Even for the case that the analytical solution is not available due to the time dependent term, the 1st order ODE can be solved by relatively simple numerical techniques. The temperature difference between two different approaches (analytical and numerical solutions) is relatively small (Jess than $1^{\circ}C$ along the time line) when they are applied to STSAT-I launch scenario. The present methods can be generally used as tools to quickly check whether a satellite box is safe against space environment during the launch stage for the case that the detailed thermal analysis is not available.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권6호
• /
• pp.555-561
• /
• 1997

The passivation of n-GaAs(100) surface has investigated by photoreflectance(PR). The surface of the sample was treated with the 0.001 N solution Se/NH$_4$OH. After the surface treatment, the samples were annealed between 400 to $700^{\circ}C$ in a $N_2$atmosphere for 10 min. The intensity of PR signal and period of Franz-Deldysh oscillation(FKO) gradually decreased as the annealing temperature increased. The surface electric field(E$_{s}$) of the sample annealed at $600^{\circ}C$ is obtained 1.34$\times$10$^{5}$ V/cm. This value is 1.97 times less than that of unannealed sample. It has found that the passivation of surface occurred when the surface of the sample had been treated with Se/NH$_4$OH solution and annealed from 500 to $600^{\circ}C$. This result could be due to activation of elemental Se on the surface. It has also found that the elemental Se of the surface diffused about 100 $\AA$ into the bulk GaAs when Se-treated sample was annealed at $600^{\circ}C$.>.

• 한국의료질향상학회지
• /
• 제29권2호
• /
• pp.64-84
• /
• 2023

Purpose:Plaster splints are routinely performed in the Emergency Department (ED) and avoidable complications such as skin ulcerations and fracture instability arise mainly due to improper techniques. Despite its frequent use, there is often no formal training on the fundamental principles of plaster splint application for a medical officer rotating through ED. We aim to use Quality Improvement (QI) methodology to reduce number of incorrect plaster splint application to improve overall patient care via a bundled educational solution. Methods: We initiated a QI program implementing concepts derived from the Institute for Healthcare Improvement models, including Plan-Do-Study-Act (PDSA) cycles, to decrease the rate of incorrect plaster splint application. A bundled education solution consisting of three sequential interventions (practical teaching session, online video lecture and quick reference cards) were formulated to specifically target critical factors that had been identified as the cause of incorrect plaster splints in ED. Results: With the QI intervention, our overall rate of incorrect plaster splints was reduced from 84.1% to 68.6% over a 6-month period. Conclusion: Following the QI project implementation of the bundled educational solution, there has been a sustained reduction in incorrect plaster splints application. The continuation of the training program also ensures the sustainability of our efforts in ED.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.35-40
• /
• 1986

The early hydration of tri-calcium silicate $(C_3S)$ with different cooling conditions was studied by varing water/solid ratio and atmosphere. The cooling condition and water/solid ratio affected to the second peak of heat liberation but it had no correlation to the induction period. The $Ca^{2+}$ concentration in the aqueous solution was maximized at the starting point of the second peak of heat liberation but in the $CO_2$ exsistence the $Ca^{2+}$ concentration was low and $SiO_2$ con-centration was increased. The hydration rate of $C_3S$ was so accelerated that the induction period could not appear in the $CO_2$ exsistence.

• Journal of Periodontal and Implant Science
• /
• 제37권3호
• /
• pp.535-542
• /
• 2007

Background : Repeated dis/re-connection of implant abutment caused bone loss around implant fixtures due to the new formation of biologic width of the mucosal-implant barrier. The aim of this clinical study was to evaluate whether the repeated dis/re-connection of implant abutment cause bone loss clinically and the effect of cleansing methods on a bone loss during the early healing period. Methods : A total 50 implants were installed in 20 patients and repeated dis/re-connection of abutment was performed at the time of surgery and once per week for 12 weeks. 0.9% normal saline solution as group1 and 0.1% chlorhexidine solution as group 2 was used to clean abutments. All patients had radiographs taken at the placement of implant and 4, 8, and 12 weeks postoperatively. The data for bone loss around implant were analyzed. Results: The marginal bone loss at 12 weeks were $1.28{\pm}0.51mm$, $1,32{\pm}0,57mm$ in the mesial and distal sides in group1, $1.94{\pm}0.75mm$, $1.81{\pm}0.84mm$ in group 2, respectively. In view of marginal bone loss, there was not a significant statistical difference between groups. Conclusions : Repeated dis/re-connection of implant abutment may not cause marginal bone loss around implant fixture although limited samples and short-term observation period. In spite of more bone loss in group 2, there was no statistical significant difference between groups. In context of those results, the clinical significance of the repeated dis/re-connection of implant abutment and the cleansing method of abutments is debatable when it comes to marginal bone loss during early healing period.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권10호
• /
• pp.1433-1439
• /
• 2000

An experiment was carried out with 48 IVRI 2CQ rats 6-8 week old, weighing 50-100 g, to study the effect of lead exposure on antioxidant defense, lipid peroxide level, status of thiol groups and concentration of lead in the liver and kidneys at the end of the exposure and also after withdrawal of lead administration. Twenty four rats were given lead at a daily dose rate of 1 mg lead/2 ml of distilled water/kg body weight as lead acetate solution intraperitoneally for a period of 30 days. Another 24 control rats received 2 ml of sterile normal saline solution (0.85% NaCl)/kg body weight in an identical manner. A many-fold increase in concentration of lead was associated with a non-significant (p>0.05) decrease in the activities of superoxide dismutase (SOD) in the liver (27%) and kidneys (12%) and catalase in kidneys (22%). A significant (p<0.05) increase in lipid peroxide level was recorded in the liver (40%) compared with control values. There were significant (p<0.05) decreases in the total thiol and protein bound thiol contents in liver and an increase in non-protein bound thiol groups in the kidneys of lead exposed rats. During the 10 day observation period after withdrawal of lead administration, no significant change was observed with respect to any of the above parameters indicating that a 10 day withdrawal period was not enough for restoration of normality. It is concluded that the magnitude of response and the resultant changes in the lipid peroxide concentration, and the activities of SOD and catalase were not identical in the liver and kidneys of lead-exposed rats.

• 전자공학회논문지B
• /
• 제30B권7호
• /
• pp.1-13
• /
• 1993

In this paper, the problems of the conventional special-purpose array processor such as the deficiency of flexibility have been investigated. Then, a new modified methodology has been suggested and applied to obtain the common solution of the three typical App algorithms like SP(Shortest Path), TC(Transitive Closure), and MST(Minimun Spanning Tree) among the various APP algorithms using the similar method to obtain the solution. In the newly proposed APP parallel algorithm, real-time Processing is possible, without the structure enhancement and the functional restriction. In addition, we design 2-demensional bit-parallel low-triangular systolic array processor and the 1-PE in detail. For its evaluation, we consider its computational complexity according to bit-processing method and describe relationship of total chip size and execution time. Therefore, the proposed processor obtains, on which a large data inputs in real-time, 3n-4 execution time which is optimal o(n) time complexity, o(n$^{2}$) space complexity which is the number of total gate and pipeline period rate is one.

• 경영과학
• /
• 제17권2호
• /
• pp.55-65
• /
• 2000

This paper addresses a problem of machining route selection in multi-stage process with machine group. This problem is considered the subcontracting and the production in-house such as regular and overtime work. the proposed model is formulated as a 0-1 integer programming constraining the avaliable time of each machine for planning period and total overtimes. The objective of the model is to minimize the sum of processing cost, overtime cost, and subcontracting cost. To solve this model, a genetic algorithm(GA) approach is developed. The effectiveness of the proposed GA approach is evaluated through comparisons with the optimal solution obtained from the branch and bound. In results, the same optimal solution is obtained from two methods at small size problem, and the consistent solution is provided by the GA approach at large size problem. The advantage of the GA approach is the flexibility into decision-making process because of providing multiple machining routes.