• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3311-3316
• /
• 2007

To analyze the influence of valve overlap period on a backfire occurrence, the single cylinder research engine with MCVVT(Mechanical Continuous Variable Valve Timing) system is developed and backfire limit equivalence ratio defined as fuel-air ratio equivalence ratio at which backfire occurs is examined according to various valve overlap period. The MCVVT is the system to control valve overlap period by mechanical device. It is estimated that the lower valve overlap period has the higher backfire limit equivalence ratio though the same energy is supplied. When the valve overlap period is changed from 30$^{circ}$ CA to 0$^{circ}$ CA, backfire limit equivalence ratio is increased 74%, approximately. It means that valve overlap period is concern in backfire occurrence, and may be one of the methods for controlling back fire occurred in a $H_2$ engine.

• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1120-1124
• /
• 2004

Recently, Plasma Display Panel(PDP) has been in the spotlight as one of the next generation flat-panel-display device. However, it has several drawbacks like the low contrast ratio and the low luminance. In this study, a new address waveform is suggested to improve the priming effect and contrast ratio at the address period in the Address Display period Separated(ADS) method. We modified waveform, instead of a conventional waveform, to an address period, for operating on the Plasma Display Panels, which used the conventional gas [He-Ne-Xe〕. When the ramp pulse is added to the address period at the sustain electrode, it is improved on the priming effect and contrast ratio.

• 한국수소및신에너지학회논문집
• /
• 제28권2호
• /
• pp.225-230
• /
• 2017

Coal oil is widely used as a home heating fuel for portable and installed coal oil heaters. Today, Coal oil is widely used as fuel for jet engines and some rocket engines in several grades. This paper describes the performance characteristics according to the compression ratio of spark ignition engine fuelled with coal oil. As a result, the following knowledge is obtained: As the compression ratio is decreased, there is an increase in torque, indicated mean effective pressure (IMEP), heat release rate, and brake thermal efficiency. Higher compression ratio of the engine decreases the ignition delay period, combustion period, and cooling loss.

• Structural Engineering and Mechanics
• /
• 제72권3호
• /
• pp.395-408
• /
• 2019

Engineered structures built in seismic-prone areas are affected by aftershocks in addition to mainshocks. Although aftershocks generally are lower in magnitude than that of the mainshocks, some aftershocks may have higher intensities; thus, structures should be able to withstand the effect of strong aftershocks as well. This seismic scenario arises for far-field mainshock along with near-field aftershocks. In this study, four 2D reinforced concrete (RC) frames with different numbers of stories were designed in accordance with the current Iranian seismic design code. As a way to evaluate the seismic response of the case-study RC frames, the inter-story drift ratio (IDR) demand, the residual inter-story drift ratio (RIDR) demand, the Park-Ang damage index, and the period elongation ratio can be useful engineering demand parameters for evaluating their seismic performance under mainshock-aftershock sequences. The frame models were analyzed under a set of far-field mainshock, near-fault aftershocks seismic sequences using nonlinear dynamic time-history analysis to investigate the relationship among IDR, RIDR, Park-Ang damage index and period ratio experienced by the frames. The results indicate that the growth of IDR, RIDR, Park-Ang damage index, and period ratio in high-rise and short structures under near-fault aftershocks were significant. It is evident that engineers should consider the effects of near-fault aftershocks on damaged frames that experience far-field mainshocks as well.

• Structural Engineering and Mechanics
• /
• 제39권5호
• /
• pp.683-701
• /
• 2011

In this study, inelastic displacement ratios and ductility demands are investigated for SDOF systems with period range of 0.1-3.0 s. with elastoplastic behavior considering soil structure interaction. Earthquake motions recorded on different site conditions such as rock, stiff soil, soft soil and very soft soil are used in analyses. Soil structure interacting systems are modeled with effective period, effective damping and effective ductility values differing from fixed-base case. For inelastic time history analyses, Newmark method for step by step time integration was adapted in an in-house computer program. Results are compared with those calculated for fixed-base case. A new equation is proposed for inelastic displacement ratio of interacting system ($\tilde{C}_R$) as a function of structural period of interacting system ($\tilde{T}$), strength reduction factor (R) and period lengthening ratio ($\tilde{T}/T$). The proposed equation for $\tilde{C}_R$ which takes the soil-structure interaction into account should be useful in estimating the inelastic deformation of existing structures with known lateral strength.

• 한국식품영양학회지
• /
• 제30권4호
• /
• pp.830-840
• /
• 2017

Excessive body weight gain during the growth period of early life may predispose individuals towards obesity and metabolic disorder in later life. We investigated the possibility of using the food efficiency ratio as an early indicator for predicting susceptibility to diet-induced obesity and insulin resistance. Four-week-old, prepubertal, male Sprague Dawley rats were divided into obesity-prone and obesity-resistant groups based on food efficiency ratio values after five days on a high-fat diet. Metabolic parameters measured after 2, 6, and 10 weeks, and specific phenotypes were compared with each group. Obesity-prone rats had higher increases in body weight and fat mass compared to obesity-resistant rats over the study period. Obesity-prone rats became glucose intolerant early in this study and remained so throughout the experimental period, with increases in fat weight and leptin levels occurring first, followed by increases in insulin level. Gluconeogenesis and insulin resistance significantly increased in obesity-prone groups in which activities of glucose-6-phosphatase and phosphoenolpyruvate carboxykinase were increased and glucokinase activity decreased. Higher food efficiency ratio at an early age was closely correlated with body fat accumulation, hyperleptinemia, and hyperinsulinemia of middle and elderly age. We suggest a high food efficiency ratio in prepubertal subjects may be a useful predictor of future obesity and insulin resistance.

• 산업경영시스템학회지
• /
• 제35권2호
• /
• pp.71-79
• /
• 2012

In this paper, an evaluation of a product replacement ratio of irreparable items to the normally working ones is performed with a view to a warranty analysis. It is demonstrated that the replacement ratio during the warranty period can be estimated from the field data collected during the period of operation, and one can provide the management with a useful information regarding the appropriateness for the warranty period, which is vital to the product marketing strategy. Although warranty data usually take the form of multiply right censored interval data, the conventional reliability analysis method seems to be good enough as in this case. More sophisticated method such as warranty cost analysis and 2-dimensional warranty analysis is yet desired.

• Journal of Nutrition and Health
• /
• 제22권2호
• /
• pp.108-117
• /
• 1989

The purpose of this study was aimed to investigate the historical tends of population growth which has reflected direct effect of the ratio of food self sufficiency in Korea between the year of 1910 and 1980. Author divided the whole years between 1910 and 1980 into five different periods ; colonial period from 1910 to 1945, post colonial period from 1945 to 1950, Korean war period from 1950 to 1955, post Korean war period from 1955 to 1960, fast economic growing period 1960~1980. The ratio of national food self sufficiency has been profoundlly affected by dual factors ; rate of population group and increment of GNP which reflect the national economic development. Total food production never reached the level of population growth ratio in Korea. As a result food demand and supply has shown imbalaced condition which leads to import foods from outside contury to compensate food shortage. The increment of GNP sharply cut down the cereal consumption. The consumption of fish, milk, eggs and meat reflected to increase since 1970.

• 한국수소및신에너지학회논문집
• /
• 제18권3호
• /
• pp.348-355
• /
• 2007

To grasp a feasibility of back fire control by valve overlap period, back fire limit equivalence ratio was estimated with valve overlap period which has the same supply energy and positive intake pressure as valve overlap period $300^{\circ}\;CA$. As the result, it was shown that the smaller valve overlap period has the higher back fire limit equivalence ratio under valve overlap period $300^{\circ}\;CA$ as well as VOP $0^{\circ}\;CA$. This result means that expansion of back fire equivalence ratio by decreasing valve overlap period was caused by decrease of back flow duration of flame from in-cylinder to intake port than decrease of lower supply energy.

• 한국지진공학회논문집
• /
• 제17권1호
• /
• pp.1-10
• /
• 2013

In order to predict inelastic displacement response without nonlinear dynamic analysis, the equal displacement rule can be used for the structures with longer natural periods than the characteristic period, $T_g$, of earthquake record. In the period range longer than $T_g$, peak displacement responses of elastic systems are equal or larger than those of inelastic systems. In the period range shorter than $T_g$, opposite trend occurs. In the equal displacement rule, it is assumed that peak displacement of inelastic system with longer natural period than $T_g$ equals to that of elastic system with same natural period. The equal displacement rule is very useful for seismic design purpose of structures with longer natural period than $T_g$. In the period range shorter than $T_g$, the peak displacement of inelastic system can be simply evaluated from the peak displacement of elastic system by using the inelastic displacement ratio, which is defined as the ratio of the peak inelastic displacement to the peak elastic displacement. Smooth hysteretic behavior is more similar to actual response of real structural system than a piece-wise linear hysteretic behavior such as bilinear or stiffness degrading behaviors. In this paper, the inelastic displacement ratios of the smooth hysteretic behavior system are evaluated for far-fault and near-fault earthquakes. The simple formula of inelastic displacement ratio considering the effect of $T_g$ is proposed.