• 대한전자공학회논문지TC
• /
• 제48권10호
• /
• pp.35-42
• /
• 2011

무선 개인영역 네트워크는 저전력소비, 저가, 소형화 등의 장점을 가지고 있어 개인의 휴대장치와 홈 네트워크, 센서 네트워크 등으로 그 응용범위가 커지고 있다. IEEE 802.15.3 표준에서는 point to point 혹은 peer to peer의 UM(Usage Model)을 기본으로 하였지만, 가정이나 회사 내에서 데이터 통신을 요구하는 장치의 수가 증가하면서 point to multipoint의 UM이 제안되었다. 본 논문에서는 point to multipoint의 UM에서 표준에서는 지원되지 않는 multicast-ACK 메시지를 사용함으로써 동일한 데이터를 다수의 디바이스로 전송하는 경우에 Multicast 전송을 하여 전송률을 향상시켰다. Multicast 전송을 하게 되면 multicast-ACK의 증가로 지연시간이 증가되는 문제가 발생하여 이를 해결하기 위하여 CTA구간에서 데이터 전송이 끝나고 채널이 남는 구간에 multicast ACK를 전송하도록 하였다. 제안한 메커니즘을 수학적 분석을 통해 성능을 표준과 비교하였다.

• 한국정보통신학회논문지
• /
• 제26권11호
• /
• pp.1660-1665
• /
• 2022

최근 많은 산업체에서 3차원 스캐닝 기술을 활용하고 있다. 3D 스캐너의 성능이 향상됨에 따라 점데이터를 획득하면 후처리를 통해서 일정 비율만큼 줄이는 샘플링 단계를 수행하거나, 잡음이라고 판단되는 부분을 제거한다. 하지만, 이와 같은 추가과정 수행에도 불구하고 오랜 시간 동안 스캐닝하면 점데이터들을 한꺼번에 처리할 수 없다. 일반적으로 멀티스레드 환경을 이용하여 기획득된 점데이터를 먼저 처리하는 방식을 이용하지만, 스캐닝 프로세스 작업 시간이 증가함에 따라 다양한 환경 조건과 누적된 연산으로 인하여 점차 처리 성능이 낮아진다. 본 연구에서는 3D 스캐너로부터 실시간으로 들어오는 점데이터를 누적된 고속 특징점 히스토그램 계산을 이용하여 불필요하다고 판단되는 점데이터를 초기에 제거하는 방식을 제안한다. 이 방법을 이용하면 전체 3D 스캐닝 프로세스의 속도 향상을 가져온다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.354-356
• /
• 2006

In this paper, the position control performance of networked control systems is analyzed when time delay through the network is considered. Integrating a control system into a network has great advantages over the traditional control system which uses point to point connection: it allows remarkable reduction in wiring, makes it easy to install and maintain the system, and improves compability. However, a networked control system has the critical defect that network uncertainties, such as time delay, can degrade the control system's performance. Therefore, the major concern of a networked control system is analyzing the effect of network uncertainties. This paper is concerned with PID controller performance for stability region, critical stability region and unstability region under the time delay in the Controller Area Network.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.670-675
• /
• 2001

This paper describes aerodynamic preliminary design performance prediction and flow analysis for turbine of the marine middle engine turbocharger. The performance characteristics of turbocharger turbine are investigated at various operating conditions using mass flow rate and computational flow analysis for rotor and nozzle at design point are performed. Preliminary design results are performed by applying mean line and radial equilibrium theory. Performance prediction and flow analysis results show good agreement with experiments. From 3 dimensional flow analysis result, efficiency is 0.6% greater than design point. Therefore, this design approach is useful for preliminary design, and helps to increase the design capability for optimized rotor blade.

• 품질경영학회지
• /
• 제37권1호
• /
• pp.69-79
• /
• 2009

Supply Chain Management is the process of planning, implementing and controlling the operations of the supply chain to satisfy customer requirements as efficiently as possible. It spans all movements and storage of raw materials, work-in-process inventory, and finished goods from point-of-origin to point-of-consumption. Korean Standards Association claims the Supply Chain Quality Management(SCQM) as a win-win model of organizations among the supply chains for the best product/service quality to final customers. The SCQM is focused on quality of product/service and will do much for improving manufacturing performance between customer and suppliers. Consulting-teams make every effort to design suitable solution for constructing solutions and improving the performance. This study is to analyze the performance of SCQM consulting, from July of 2007 to June of 2008, and would provide some guidelines to design the optimal consulting models and develop guidebooks.

• 한국주거학회논문집
• /
• 제14권5호
• /
• pp.75-82
• /
• 2003

In this study, the thermal performance of the room control system is analyzed in terms of control performance, potential for coil expansion and energy consumption through experiments comparing the individual room control system and an existing system. The results of this study show that the existing system is not able to supply design water flow rate and does not accurately maintain the set point temperature in each room. However, the individual room control system can set a room air temperature for each room, for it is able to supply design water flow and accurately control the set point temperature in each room and can reduce the energy consumption compared to the existing system. Moreover, the individual room control system can reduce the number of coil division zone and facilitates the construction process, because it can extend the length of the coil division.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.317-320
• /
• 2015

Documenting work-in-progress on construction sites using images captured with smartphones, point-and-shoot cameras, and Unmanned Aerial Vehicles (UAVs) has gained significant popularity among practitioners. The spatial and temporal density of these large-scale site image collections and the availability of 4D Building Information Models (BIM) provide a unique opportunity to develop BIM-driven visual analytics that can quickly and easily detect and visualize construction progress deviations. Building on these emerging sources of information this paper presents a pipeline for model-driven visual analytics of construction progress. It particularly focuses on the following key steps: 1) capturing, transferring, and storing images; 2) BIM-driven analytics to identify performance deviations, and 3) visualizations that enable root-cause assessments on performance deviations. The information requirements, and the challenges and opportunities for improvements in data collection, plan preparations, progress deviation analysis particularly under limited visibility, and transforming identified deviations into performance metrics to enable root-cause assessments are discussed using several real world case studies.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권2호
• /
• pp.84-90
• /
• 2014

This paper presents the results of three-dimensional face point cloud smoothing based on a modified anisotropic diffusion method. The focus of this research was to obtain a 3D face point cloud with a smooth texture and number of vertices equal to the number of vertices input during the smoothing process. Different from other methods, such as using a template D face model, modified anisotropic diffusion only uses basic concepts of convolution and filtering which do not require a complex process. In this research, we used 6D point cloud face data where the first 3D point cloud contained data pertaining to noisy x-, y-, and z-coordinate information, and the other 3D point cloud contained data regarding the red, green, and blue pixel layers as an input system. We used vertex selection to modify the original anisotropic diffusion. The results show that our method has improved performance relative to the original anisotropic diffusion method.

• ETRI Journal
• /
• 제24권4호
• /
• pp.299-310
• /
• 2002

This paper describes an integrated network management framework for providing point-to-multipoint reservation service (PMRS) in an ATM network. There are two major issues confronting the network service provider in relation to this service: one is to rapidly confirm the acceptability of the subscriber's reservation at subscription time, and the other is to punctually activate the reserved point-to-multipoint service. To meet these requirements, we developed a service provision model (SPM) and a network resource model of a bandwidth allocation timetable (BATT). We propose a point-to-multipoint routing algorithm composed of ordering and backtracking procedures, which can find the best branch point under the complex network topology and can add more destinations to the existing point-to-multipoint route. We demonstrate the feasibility of the SPM, the BATT, and the point-to-multipoint routing algorithm by implementing our schemes and analyzing their performance under the operational ATM network of KT(Korea Telecom).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.95-96
• /
• 2017

A three-level inverter is widely used thanks to its excellent performances, but the voltage may fluctuate at the neutral point of the split DC-Link. Neutral point voltage fluctuations cause inverter performance degradation and switching element damage, so the neutral point voltage control is essential. However, the neutral point control can be also limited by modulation index and power factor. This paper analyzes the limitation of the neutral point voltage control due to the limitation of zero-sequence voltage, and suggests a method to determine the region where the PWM has to be changed for a better neutral point control.