• 전력전자학회논문지
• /
• 제27권4호
• /
• pp.297-304
• /
• 2022

This study compares the performance of artificial intelligence (AI)-based maximum power point tracking (MPPT) methods under partial shading conditions in a photovoltaic generation system. Although many studies on AI-based MPPT have been conducted, few studies comparing the tracking performance of various AI-based global MPPT methods seem to exist in the literature. Therefore, this study compares four representative AI-based global MPPT methods including fuzzy logic control (FLC), particle swarm optimization (PSO), grey wolf optimization (GWO), and genetic algorithm (GA). Each method is theoretically analyzed in detail and compared through simulation studies with MATLAB/Simulink under the same conditions. Based on the results of performance comparison, PSO, GWO, and GA successfully tracked the global maximum power point. In particular, the tracking speed of GA was the fastest among the investigated methods under the given conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.587-592
• /
• 2004

Direct velocity feedback (DVFB) control is known that it offers an unconditional stability with very high performance when the control strategy is applied at a point collocated sensor and actuator pair, because the sensor-actuator pair has strictly positive real (SPR) property. In this paper, two types of collocated sensor-actuator pairs are considered for practical active vibration control of a structure. They are a point collocated sensor-actuator pair and a point sensor-distributed actuator pair. Both pairs with DVFB sho robust stability and performance. It is noted that the collocated point sensor-actuator ultimately acts as a 'skyhook' damper, but the point sensor-distributed actuator pair with DVFB acts as a 'skyhook' rotational dmaper pair.ational dmaper pair.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.173-176
• /
• 2006

The one of the commonly reported failure mode of the RC beam strengthened with FRP was caused by the separation of the concrete cover, so called delamination. Therefore, ACI440 recommended that concrete cover delamination can be prevented in strengthened beams if bond length of FRP composite be exteneded over a point of cracking moment. In this study, the failure mode and the flexural performance of RC beam with different bond length of FRP are estimated. Each bonded length is calculated based on the point of cracking moment with addition or subtraction of specific length(=150mm). The results of this study show that mid-span debonding occurs in the specimen strengthened with CFRP strips which are bonded over the point of cracking moment, while concrete cover deliamination occurs at the termination point of CFRP in the specimen with less bonded length than the point of cracking moment region.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.879-884
• /
• 2009

A Method for detection of saturation of a current transformer(CT) is proposed. The algorithm is initiated when the end point of a saturation period is detected. This detection is achieved by checking the time interval between the adjacent zero-crossing points of the second derivative of the secondary current. Once the end point of the saturation period is detected, the beginning point of the corresponding saturation period is determined by backward examination of the sum of the secondary current from the end point. The performance of the algorithm was evaluated for a-g faults on a 345 kV 100km overhead transmission line. The Electromagnetic Transient Program(EMTP) was used to generate fault current signals for different fault inception angles and different remanent fluxes. The performance evaluation shows that the proposed algorithm successfully detects the saturation period even in the presence of a remanent flux.

• 한국소음진동공학회논문집
• /
• 제14권7호
• /
• pp.619-625
• /
• 2004

Direct velocity feedback (DVFB) control is known that it offers an unconditional stability with very high performance when the control strategy is applied at a point collocated sensor and actuator pair. because the sensor-actuator pair has strictly positive real (SPR) property In this paper, two types of collocated sensor-actuator pairs are considered for practical active vibration control of a structure. They are a Point collocated sensor-actuator pair and a point sensor-distributed actuator pair. Both pairs with DVFB show robust stability and performance. It is noted that the collocated point sensor-actuator ultimately acts as a “skyhook” damper, hut the point sensor-distributed actuator pair with DVFB acts as a “skyhook” rotational damper pair.

• 한국지능시스템학회논문지
• /
• 제22권4호
• /
• pp.521-526
• /
• 2012

제조공정을 통해 생산된 화살의 성능은 화살의 이동궤적(궁사의 패러독스)과 탄착점의 집적도에 따라 좌우된다. 특히 동일한 환경에서 반복적으로 화살의 슈팅실험을 수행할 경우, 반복실험에서 얻어진 화살의 탄착점 집적도는 화살 성능 평가에서 중요한 객관적 지표가 된다. 그러나 화살의 탄착점에 대한 분석은 현재 상용화된 기술이 부족하며, 기존의 연구들은 화살의 성능에 영향을 미치는 제조공정 변수(화살깃, 화살촉, 화살의 곧기, 중량, 외경, 스파인)만을 최적화하려는 방향으로 기술력이 집중되어 있다. 본 논문에서는 화살의 주요성능지표인 화살의 탄착점 측정 자동화를 위해, Mamdani 퍼지 추론 시스템(Mamdani Fuzzy Inference System)과 도형의 닮음(Similarity of Polygon)을 이용한 화살의 탄착점 측정 시스템을 제안한다. 라인레이저(Line Laser)와 포토다이오드어레이(Photo Diode Array)를 이용하여 고속(약 275km/h)으로 이동하는 화살의 탄착점 데이터를 계측하고, 계측된 데이터를 퍼지 추론과 도형의 닮음을 이용하여 화살의 탄착점으로 사상(Mapping) 시킨다.

• 한국멀티미디어학회논문지
• /
• 제1권2호
• /
• pp.249-255
• /
• 1998

본 논문은 차세대 지능망(AIN Advanced Intelligent Network) 플랫폼 기반의 종합개인통신(UPT:Universal Personal Telecommunications)의 성능에 미치는 CST (Call Setup Time)의 효과를 분석하며 CST 는 파라미터로 사용된다- 차세대 지능망올 기반으로 하는 UPT구현에 있어, VLR(Visitor Location Register) 의 위치가 망의 성능에 많은 영향을 준다. VLR의 최적의 위치를 제시하기 위해, VLR이 위치할 수 있는 3가지 툴리적 구조 : SSP(Service Switching Point)에 근접해 있는 경우, CSC(Cell Site Controller)에 근접해 있는 경우 그리 고 SCP(Service Control Point)에 위 치 하는 경우를 고려 하고 UPT망에서 의 각 구간별 시 간지 연 모델을 제안하고 비교한다. 네트워크의 성능은 No.7 신호망에서 STP수와 SSP, STP(Signaling, Transfer P Point), SCP, VLR의 가용율 $\rho$ 올 변화 시키면서 망 성능을 분석하여 VLR의 최적위치를 제안한다.

• 한국전산유체공학회지
• /
• 제8권3호
• /
• pp.32-40
• /
• 2003

CFD analyses of the three-dimensional turbulent flow in the impeller and diffuser of an axial flow pump including suction and discharge parts are presented and compared with experimental data. The purpose of the current study is to validate the CFD method for the performance analysis of the main coolant pump for SMART and to investigate the effect of suction and discharge shapes on the pump performance. To generate a performance curve, not only the design point but also the off-design points were computed. The results were compared with available experimental data in terms of head generated. At the design point, the analysis accurately predicts the experimental head value. In the range of the higher flow rates, the results are also in very good agreement with the experimental data, in magnitude but also in terms of slope of variation. For lower flow rates, the results shows that the analysis considering the suction and discharge well describe the typical S-shape performance curve of the axial pump.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.129-138
• /
• 2003

Rolling bearings are classified one of the most important machine elements. The various function of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required in improve bearing lubrication. Three urea/ether oil greases with identical composition were synthesized to compare the performance of these greases according to the thickener content of grease. The typical grease physical properties were investigated. And life test of these greases was conducted by FE-9 grease life tester. The characteristics of the greases before and after life test were investigated using FT-IR, microscope, OIT and TAN meter. Large differences in the grease performance depending on the content of the thickener were observed. The grease with higher content of the hickener showed higher performance such as long life time and low TAN value. After preliminary test, twelve greases were synthesized and evaluated the performance of dropping point and OIT, then optimized two greases were selected by SSRED (Six Sigma Robust Engineering Design) using dropping point and OIT data. Characteristics of the optimized two greases were on the same level with estimated value. The optimized grease by means of OIT value showed longer grease life in comparison with optimized grease by dropping point. However two greases showed higher performance than typical urea/ether oil.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.134-137
• /
• 1998

In this paper, we propose a new consolidation algorithm for point-to-multipoint ABR flow control and compare the performance of the proposed algorithms with that of an existing consolidation algorithm. We first investigate problems of the existing algorithm in consolidating backward RM cells and propose two new consolidation algorithms to resolve these problems. Also, we investigate the performance of the proposed algorithms by simulation. As results, we show that the proposed algorithms exhibit a better performance than the existing algorithm in terms of ACR, queue length, utilization, and fairness.