• International Journal of Air-Conditioning and Refrigeration
• /
• v.16 no.2
• /
• pp.64-69
• /
• 2008

Electronic and telecommunication industries are constantly striving towards miniaturization of electronic devices. Miniaturization of chips creates extra space on PCBs that can be populated with additional components, which decreases the heat transfer surface area and generates very high heat flux. Even though an air-cooling technology for telecommunication equipment has been developed in accordance with rapid growth in electrical industry, it is confronted with the limitation of cooling capacity due to the rapid increase of heat density. In this study, liquid-cooling heat exchangers were designed and tested by varying geometry and operating conditions. In addition, air-cooling heat exchangers were tested to provide performance data for the comparison with the liquid-cooling heat exchangers. The liquid-cooling heat exchangers had twelve rectangular channels with different flow paths of 1, 2, and 12. Silicon rubber heaters were used to control the heat load to the heat exchangers. Heat input ranged from 293 to 800W, and inlet temperatures of working fluid varied from 15 to $27^{\circ}C$. The heat transfer coefficients were strongly affected by flow conditions. All liquid-cooling heat exchangers showed higher cooling performance than the air-cooling heat exchanger. The heat exchanger with 2-paths could provide more controllability on the maximum temperature than the others.

• Advances in concrete construction
• /
• v.11 no.4
• /
• pp.347-356
• /
• 2021

To address the limitation of the commonly used steam curing of reactive powder concrete (SC-RPC) in engineering, a preparation technology of normal curing reactive powder concrete (NC-RPC) is proposed. In this study, an experimental comparative research on the mechanical properties of NC-RPC and SC-RPC under uniaxial tension is conducted. Under the premise of giving full play to the ultra-high performance of RPC, the paper tries to explore whether normal curing can replace steam curing. The results show that various mechanical indexes of NC-RPC (e.g., tensile strength, ultimate tensile strain, elastic modulus and deformation performance) could basically reach the mechanical index values in steam curing at 28d age, some performance is even better at a longer age. So it affirms the feasibility of normal curing. In this paper, the influence of normal curing age on the tensile properties of RPC is discussed, and the relationship between each index and age is introduced in detail. Based on the experimental data, the tensile mechanism of RPC is analyzed theoretically, and two kinds of tensile constitutive models for RPC are proposed, one is curvilinear model, and another one is polygonal line model. The validity of the two models is further verified by the test results of others.

• Journal of Software Engineering Society
• /
• v.24 no.2
• /
• pp.35-45
• /
• 2011

Simulated annealing has been studied a long times. And it is one of the effective techniques for test data generation. But basic SA methods showed bad performance because of neighborhood selection strategies in the case of large input domain. To overcome this limitation, we propose new neighborhood selection approach, Branch Distance. We performs case studies based on the proposed approach to evaluate it's performance and to compare it whit basic SA and Random test generation. The results of the case studies appear that proposed approach show better performance than the other approach.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.2
• /
• pp.266-277
• /
• 2019

In modern warfare, securing time for preemptive response is recognized as an important factor of victory. The naval combat system, the core of naval forces, also strives to increase the effectiveness of engagement by improving its real-time information processing capabilities. As part of that, it is considered to use the TPR-tree in the naval combat system's target indexing because spatio-temporal searches can be performed quickly even as the number of target information increases. However, because the TPR-tree is slow to process updates, there is a limitation to handling frequent updates. In this paper, we present a method for improving the update performance of TPR-tree by applying the bottom-up update scheme, previously proposed for R-tree, to the TPR-tree. In particular, we analyze the causes of overlaps occurring when applying the bottom-up updates and propose ways to limit the MBR expansion to solve it. Our experimental results show that the proposed technique improves the update performance of TPR-tree from 3.5 times to 12 times while maintaining search performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.6
• /
• pp.49-58
• /
• 2005

In this paper, we have proposed a secure dynamic ID allocation protocol using mutual authentication on the RFID tag. Currently, there are many security protocols focused on the low-price RFID tag. The conventional low-price tags have limitation of computing power and rewritability of memory. The proposed secure dynamic ID allocation protocol targets to the high-performance RFID tags which have more powerful performance than conventional low-price tag by allocating dynamic ID to RFID using mutual authentication based on symmetric encryption algorithm. This protocol can be used as a partial solution for ID tracing and forgery.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.221-225
• /
• 2015

To hoist construction workers to their working space is directly related to the productivity of building construction since hoisting tasks are carried out during the working time. In order to reduce hoisting time in the condition that the number of construction lift-cars is limited, various types of the lift-cars group operation plans such as zoning and sky-lobby have been applied. However, previous researches on them cannot be compared in the performance due to their methodological limitation, discrete-event simulation methods, and cannot be find better solution to increase the performance. Therefore, this research proposed the simulation-based optimization model combining the agent-based simulation method to the scatter search optimization methods. Using the proposed model, this paper carried out the comparison analysis on the performance of typical operation plans and also optimize an operation plans by controlling the service range of lift-cars, the size and number of service zones. In this case study, it is verified that better alternatives than typical operation plans can be exists and it is possible to increase the productivity of building construction.

• Smart Structures and Systems
• /
• v.32 no.6
• /
• pp.393-402
• /
• 2023

Recently, hybrid and electric vehicles have been actively developed to replace internal combustion engine (ICE) vehicles. However, their vibrations and noise with complex spectra cause discomfort to drivers. To reduce the vibrations transmitted through primary excitation sources such as powertrains, structural changes have been introduced. However, the interference among different parts is a limitation. Thus, active mounting systems based on smart materials have been actively investigated to overcome these limitations. This study focuses on diminishing the source movement when a structure with two active mounting systems is excited to a single sinusoidal and a multi-frequency signal, which were investigated for source movement reduction. The overall structure was modeled based on the lumped parameter method. Active vibration control was implemented based on the modeled structure, and a multi-normalization least mean square (NLMS) algorithm was used to obtain the control input for the active mounting system. Furthermore, the performance of the NLMS algorithm was compared with that of the quantification method to demonstrate the performance of active vibration control. The results demonstrate that the vibration attenuation performance of the source component was improved.

• Journal of Information Processing Systems
• /
• v.19 no.5
• /
• pp.673-687
• /
• 2023

Convolutional neural network-based deep learning technology is the most commonly used in image identification, but it requires large-scale data for training. Therefore, application in specific fields in which data acquisition is limited, such as in the military, may be challenging. In particular, the identification of ground weapon systems is a very important mission, and high identification accuracy is required. Accordingly, various studies have been conducted to achieve high performance using small-scale data. Among them, the ensemble method, which achieves excellent performance through the prediction average of the pre-trained models, is the most representative method; however, it requires considerable time and effort to find the optimal combination of ensemble models. In addition, there is a performance limitation in the prediction results obtained by using an ensemble method. Furthermore, it is difficult to obtain the ensemble effect using models with imbalanced classification accuracies. In this paper, we propose a transfer learning-based feature fusion technique for heterogeneous models that extracts and fuses features of pre-trained heterogeneous models and finally, fine-tunes hyperparameters of the fully connected layer to improve the classification accuracy. The experimental results of this study indicate that it is possible to overcome the limitations of the existing ensemble methods by improving the classification accuracy through feature fusion between heterogeneous models based on transfer learning.

• Journal of the Korean Society for Library and Information Science
• /
• v.47 no.1
• /
• pp.249-268
• /
• 2013

Public Performance in Copyright Law is a wider concept, which people generally think. It includes the presentation of a work to the public by acting, musical playing, singing, narrating as well as even the act of mechanical playing phonogram and cinematographic work. Article 29 in Korean Copyright Act is the restriction of an author's public performance right. It shall be permissible to perform publicly or broadcast a work already made public for nonprofit purposes and without charging any fees to audience, spectators, or third parties, provided that the performers concerned are not paid any remuneration for such performances. Commercial phonograms or cinematographic works may be played back for the public, if no fee is charged to the audience or spectators, except in cases as set forth by Presidential Decree. In recent year, public performance in libraries became a major issue of the Copyright Law. It is a claim that watching cinematographic works in libraries is one of the act that should apply public performance right, thus to use commercial cinematographic works before six months, which was published, need permission to copyright owners. But this claim is unfair because it can make impossible normal library service. Thus there is a need to revise the Copyright Law to understand the difference between act of viewing and public performance in libraries.

• Korean Business Review
• /
• v.21 no.2
• /
• pp.111-136
• /
• 2008

The central purpose of this study is to examine the relationships among learning and growth perspective, internal business process perspective, custom perspective, financial perspective, and general performance. To achieve this purpose, this study uses Kaplan and Norton's(1996) Balanced Scorecard Model theory. A field survey was undertaken through questionnaire sampling a population of construction companies. The data was collected from 185 firms in Korea for the analysis. The major findings of this study can be summarized as follows; Theoretical consideration and empirical study indicate statistically significant relationship(F=7.68, p=0.000). Especially, Financial perspective appeared to mediate the relationship between non-financial perspectives and general performance. It concludes that Non-financial perspectives significant affect the financial perspective and general performance. But, there are several limitations and directions for future research that should be noted. The potential limitation of this study concerns sampling and for selection process. Future research needs to reduce potential bias by collecting data which allows multiple industries for a subset of the sample.