• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.4
• /
• pp.197-204
• /
• 2017

This paper aims to analyze the economic feasibility and investigate the possibility of elastic seismic design of wind-designed highrise concentrically braced frames considering change of mechanical properties of Korean steel under the strong wind and the low seismicity in Korea. To this end, first, highrise concentrically braced frames were designed considering strong wind load. And then, analyses of the economics of them were performed. The seismic performance evaluation of wind-designed highrise buildings was conducted using the response spectrum analysis procedure. Analysis results show that it is possible to save up to approximately 90% of the amount of steel on the 10% increase in steel strength without serviceability. However, with serviceability, the design sectional area of the steel with relatively high strength tends to increment considerably because of the lateral stiffness due to reduction of the inertia moment and so on. This point might apply to limitation of the steel with high tensile yield strength.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.100-105
• /
• 1992

A mathematical model is developed for a CSTR in which free radical solution polymerization of methyl methacrylate(MMA) takes place. It turns out that five ordinary differential equations are to be treated simultaneously in order to predict the reactor performance. Although the reaction proceeds under the conditions of relatively low temperature and pressure, the system shows very complex bifurcation features due to the diffusion limitation (gel effect) and the temperature dependence of the kinetic parameters and physical properties. The effects of various system parameters on the reactor performance as well as on the polymer properties are investigated by using the bifurcation analysis. The application of the singularity theory enables us to divide the parameter space into several different regions, in each of which the system takes a unique steady state structure. Under certain circumstances, complex dynamic features such as HB points and limit cycles are observed and these should be taken into consideration in the reactor design.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.242-245
• /
• 2003

This paper introduces a new algorithm of pulse generation and detection for UWB communication system. The existing UWB systems using Gaussian pulse have some difficulties to cope with bandwidth limitation and frequency transition. Moreover. the system sensitivity to channel noise has made the processes of acquisition and tacking difficult. in this paper, we introduce a new pulse generation method which is able to control the bandwidth and center frequency applying modulation method. thus could improve the detection performance of receiving algorithm. Also, we made a system to search maximum perk by applying the proposed algorithm and consequently could guarantee the correct detection. By the result of simulation, when accumulate 10 times at every 2dB band shifting from 0 to 18dB on AWGN channel, we could confirm the proposed method has 97.4% PDR(Pulse Detection Rate) and 1.868% FAR(False Alarm Rate) performance at 4dB SNR and 15% transmission power threshold level.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.82-89
• /
• 2007

Sound transmission characteristics are investigated on the corrugated steel and aluminium extruded panels used for railway vehicles. Sewell-Sharp-Cremer(SSC) model, equivalent orthotropic plate model and equivalent mass law are applied to predict the sound transmission loss. The predicted values of the sound transmission loss are compared with the measured values. The reliability and the limitation of the prediction models are investigated. For the corrugated panels and honeycomb panels, the coincidence and local resonance severely deteriorate the sound insulation performance around the corresponding frequency bands. The result of the study shows that the equivalent orthotropic plate model and the SSC model can be used as good prediction models, if the coincidence frequency or local resonance frequency is correctly applied.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.29-39
• /
• 1998

A conversational programming system for turning processes was studied to enhance the user friendliness of a NC Lathe by adopting man-machine interface functions through Delphi programming tool under the Windows 95 environment. Functions of tool collision checking were developed through zone limitation algorithms. Final shape of workpiece was generated by means of tree structure algorithm. Shop floor programming performance was incorporated in the developed CAM module. In order to increase flexibility of the man-machine interface, graphic based programming tools have been developed. A NC turning machine equipped with an open architecture PCNC was used as a test bed of the system. Performance of the system was verified through case studies.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.6
• /
• pp.951-955
• /
• 1999

The effects of restricting feed [60% of ad libitum (AL) intake] (FR) or water provided from 0900 h to 1600 h, daily) (WR) or both (FWR) from 14 to 42 days of age on heterophil/lymphocyte (H/L) response and performance in broiler chickens under the hot humid tropical conditions were determined. Feed and/or water limitation retarded growth, but had no adverse effect on overall feed conversion ratio and survivability. The trend for total feed and water consumption was similar to body weight pattern with AL>WR>FR>FWR. The nutritional regimens had significant effect on overall water:feed ratios with FR>(AL=WR)>FWR. Restriction of feed and/or water resulted in marked elevation of H/L ratios. As measured by H/L ratios, the effect of adapting to FR dissipated between 16 to 21 days after the onset of feed restriction. The H/L ratios of WR and FWR birds remained elevated throughout the duration of the experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2043-2054
• /
• 1996

In this paper, Digital Delay Locked Loop(DDLL) is designed, implemented and analysed by experiment whose results show that it is possible to track the received signal by this scheme. Designed digital DLL has an advantage that it is not needed to maintain gain balance between early and late channels, which has been problem with an analog DLL. Also DDLL has more improved noise performance compared to analog DLL due to noise level limitation and noise cancellation characteristics. For various loop parameters, their effects on loop performance are analysed and simulated. Proposed DDLL is the first attempt as a digital approach in code tracking loop and it is expected to be a good reference for spread spectrum communication research.

• KIEAE Journal
• /
• v.13 no.2
• /
• pp.13-20
• /
• 2013

Today, the world energy consumption in buildings occupies more than 30%. In our country, the energy consumption in buildings also occupies 25% of the entire national energy consumption. With the increasing demand of energy saving in architectural fields, there is a more interest in low-energy construction. For these low-energy housings, our country is planning to apply the energy-saving design standards at the level of passive houses in 2017. However, there is still a limitation in energy saving only with the standards on the performance of envelope in buildings. This means that unless a building is airtight even though it was well-insulated, cooling and heating energy consumption will increase due to the infiltration and leakage. Therefore, this study aims to make a comparative analysis of airtight performance by conducting a blower door test on the housings applied with passive designs, analyze the reasons why most houses fall short of the airtightness standards, and complement the airtightness problems in the inadequate parts of the buildings in order to save building energy.

• Korean Management Science Review
• /
• v.32 no.2
• /
• pp.125-143
• /
• 2015

When studying the film industry, researchers have seldom addressed the dynamic interaction between marketing information and word of mouth in the motion picture industry mainly because of the limitation of traditional research methodologies. This study explores integration and competition among important variables influencing on audience's choice on movie selection, particularly by using a new method of agent-based modeling including competitive environment. Decision process of moviegoer composed of transition probability based on multinomial logit model, considering marketing and box-office information, critique, and word of mouth from other moviegoers. After validating the fitness of market share among released movies, this study conducted a set of simulation experiments considering several variables such as market size, change of weight between variables, and movie performance under competition. Propositions are derived from the simulation results is also suggested for future research.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.2
• /
• pp.61-70
• /
• 2020

Convolutional Neural Networks (CNN) have been used extensively in recent times to solve image classification and segmentation problems. However, the use of CNNs in image super-resolution problems remains largely unexploited. Filter interpolation and prediction model methods are the most commonly used algorithms in super-resolution algorithm implementations. The major limitation in the above named methods is that images become totally blurred and a lot of the edge information are lost. In this paper, we analyze super resolution based on CNN and the wavelet transform super resolution method. We compare and analyze the performance according to the number of layers and the training data of the CNN.