• Journal of Construction Engineering and Project Management
• /
• v.3 no.3
• /
• pp.1-9
• /
• 2013

Environmental problems like global warming have now become important issues that should be considered in all industries, including construction. In South Korea, many studies have been conducted to achieve the government's goals of reduction in environmental impacts. However, the research on buildings has only focused on CO2 emission as a research target despite the fact that other environmental impacts resulting from ozone depletion and acidification should also be considered, in addition to global warming. In this regard, this study attempted to propose assessment criteria and methods to evaluate the environmental performance of the structures from various aspects. The environmental impact category can be divided into global impacts, regional impacts, and local impacts. First, global impacts include global warming, ozone layer depletion, and abiotic resource depletion, while regional impacts include acidification, eutrophication, and photochemical oxidation. In addition, noise and vibration occurring in the building construction phase are defined as local impacts. The evaluation methods on the eight environmental impacts will be proposed after analyzing existing studies, and the methods representing each environmental load as monetary value will be presented. The methods presented in this study will present benefits that can be obtained through green buildings with a clear quantitative assessment on structures. Ultimately, it is expected that if the effects of green buildings are clearly presented through the findings of this study, the greening of structures will be actively expanded.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1587-1592
• /
• 2012

Analysis on co-use parameters in TV frequency channels is essential to utilize a TV White Space(TVWS) efficiently. A transmission probability of interfering transmitter can be used as some criteria for performance evaluation of the systems that co-use the cochannels. We considered a duty cycle as a parameter for getting the method how heterogeneous systems can use simultaneously a co-channel in TVWS. We analyze the transmission probability of interfering transmitter with an assumption that the probability is the same as the duty cycle, a time that it spends in an active state as a fraction of the total under consideration. In order to make an analysis of relationship between duty cycle and performances of two systems. We take into consideration on the case that WLAN is an victim receiver and WiBro is a interfering transmitter. Analyzed coexistence results may be widely applied into the technique developed to get the coexisting condition for wireless devices using many communication protocols in same frequency.

• Nuclear Engineering and Technology
• /
• v.45 no.6
• /
• pp.721-730
• /
• 2013

Within the framework of the ASTRID project, core design studies are being conducted by the CEA with support from AREVA and EDF. The pre-conceptual design studies are being conducted in accordance with the GEN IV reactor objectives, particularly in terms of improving safety. This involves limiting the consequences of 1) a hypothetical control rod withdrawal accident (by minimizing the core reactivity loss during the irradiation cycle), and 2) an hypothetical loss-of-flow accident (by reducing the sodium void worth). Two types of cores are being studied for the ASTRID project. The first is based on a 'large pin/small spacing wire' concept derived from the SFR V2b, while the other is based on an innovative CFV design. A distinctive feature of the CFV core is its negative sodium void worth. In 2011, the evaluation of a preliminary version (v1) of this CFV core for ASTRID underlined its potential capacity to improve the prevention of severe accidents. An improved version of the ASTRID CFV core (v2) was proposed in 2012 to comply with all the control rod withdrawal criteria, while increasing safety margins for all unprotected-loss-of-flow (ULOF) transients and improving the general design. This paper describes the CFV v2 design options and reports on the progress of the studies at the end of pre-conceptual design phase 1 concerning: - Core performance, - Intrinsic behavior during unprotected transients, - Simulation of severe accident scenarios, - Qualification requirements. The paper also specifies the open options for the materials, sub-assemblies, absorbers, and core monitoring that will continue to be studied during the conceptual design phase.

• Journal of Educational Research in Mathematics
• /
• v.12 no.1
• /
• pp.145-162
• /
• 2002

In this study, on the basis of the seventh national mathematics curriculum, the achievement standards were developed to specify the objectives and contents of teaching-learning and the assessment standards were also developed to differentiate students' levels of achievement at school mathematics. The achievement standards were developed on the following guidelines; 1) to present the minimum standards based on the national curriculum, 2) to develop the standards based on the order of curriculum, 3) to suggest the minimum but ultimate achievement target, 4) to comprise not only of the intellectual but also of psychological spheres such as knowledge, function, attitude, aptitude, etc., and 5) to suggest the standards comprehensively and concretely. The standards were developed on the basis of the middle areas of contents of the curriculum in order not to be too comprehensive, nor to be too detailed. Learning activities, on the other hand, were provided for the assistance of instructions with emphasis on creativity rather than on the routine instruction. The assessment standards were established based on the following principles; 1) to establish the assessment methods, contents, and situations which are to be used for assessment, 2) to establish the criteria of classifying the assessed into the upper, intermediate and lower levels, 3) to develop the assessment standards in a proportionate balance to achievement standards, 4) to establish the intermediate level as a standard, and 5) to establish the minimum level in the contents, concepts, values and attitudes of basic learning. This study also suggested the exemplary test items including short-answer and open-ended questions while putting emphasis on students' real performance to increase their ability in solving problems rather than in calculating. In addition to the test items, it introduced the grading system developed to grade the items with concrete guidelines and to report students' achievement on doing mathematics.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.152-165
• /
• 1993

This study was performed at eleven small-sized plating factories located in Seoul, Incheon, Ansan, and Taejeon from July 21 to October 6, 1992. The major objectives of this study were to evaluate worker exposure to hexavalent chromium and local exhaust ventilation (L.E.V.) systems at the chromium plating operations. The most suitable L.E.V. systems for chromium plating tanks were designed as examples for recommendation to the industry. The results are summarized as follows. The range of chromium plating operations investigated included decorative, hard, and black chromium plating on several kinds of parts. Most of plating tanks were not equipped with proper control methods against emission of hexavalent chromium mists and workers were not wearing appropriate personal protectives. The ariborne hexavalent chromium concentrations showed an approximate lognormal distribution. The geometric means of both personal and area samples were within the Korean and ACGIH standards, $50{\mu}g/m^3$. However, in comparison with the NIOSH criterion, $1{\mu}g/m^3$, the geometric means of personal samples at two factories and the geometric means of area samples at two factories exceeded it. The geometric means of personal and area samples of high exposure groups (above the NIOSH criterion) were 7 and 27 times higher than those of low exposure groups (below the NIOSH criterion), respectively. The L.E.V. systems of high exposure groups were improperly designed, and the factory with the highest exposure level had no L.E.V. systems at all on chemical etching process. Whereas at factories of low exposure groups, mist control methods such as mist suppressants, tank cover, and/or auxillary L.E.V. systems were added to L.E.V systems. The evaluation of L.E.V. systems showed that there was no chromium plating operation satisfying the ACGIH criteria for capture velocity, slot velocity, and exhaust rate simultaneously. To increase performance of L.E.V. systems, it must be designed to minimize the impact of boundary layer separation. Push-pull ventilation hood and downward plenum ventilation hood were suggested for the Korean industry.

• Journal of Radiation Protection and Research
• /
• v.36 no.1
• /
• pp.35-43
• /
• 2011

The PHENIX Experiment is the largest of the four experiments that have taken data at the Relativistic Heavy Ion Collider. PHENIX, the Pioneering High Energy Nuclear Interaction eXperiment, is designed specifically to measure direct probes of the collisions such as electrons, muons, and photons. The primary goal of PHENIX is to discover and study a new state of matter called the Quark-Gluon Plasma. Among many particles, muons coming from W-boson decay gives us key information to analyze the spin of proton. Resistive plate chambers are proposed as a suitable solution as a muon trigger because of their fast response and good time resolution, flexibility in signal readout, robustness and the relatively low cost of production. The RPC detectors for upgrade were assembled and their performances were evaluated. The procedure to make the detectors better was optimized and described in detail in this thesis. The code based on ROOT was written and by using this the performance of the detectors made was evaluated, and all of the modules for north muon arm met the criteria and installation at PHENIX completed in November 2009. As RPC detectors that we made showed fast response, capacity of covering wide area with a resonable price and good spatial resolution, this will give the opportunity for applications, such as diagnosis and customs inspection system.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.2
• /
• pp.23-29
• /
• 2010

In this study, there is a modeling for the procedure and operational method of the project based capstone design and related products which are a certificate of graduate status, and those results were evaluated by self-review and the performance assessment. Finally, the improvements in the operating management method are proposed. Before one semester by the end of to the assessment, the design thesises of capstone results are fixed to the 15 sets by 2 people in each group. All teams are satisfied the criteria of evaluation, and they all got a grad over 60 points. The mean value of their's score are similar to the average of recent 5 years. The results of self-evaluations and questionaries indicate a totally self-satisfied(3.8~4points out of 5), but the weak parts of this procedure are known as the area of plan making and Implementation. Also, there are some problems associated with a group of people into a team by the human relation rather than knowledge based mutual supplementation.

• Journal of Practical Engineering Education
• /
• v.6 no.1
• /
• pp.23-29
• /
• 2014

In this study, there is a modeling for the procedure and operational method of the project based capstone design and related products which are a certificate of graduate qualification, and those results were evaluated by self-review and the performance assessment. Processing of research based on wireless searching robot is described according to the model. Before one semester by the end of to the assessment, the design thesis of capstone results was fixed to 18 groups with two people in each group. 13 teams out of 18 teams are satisfied the criteria of evaluation, and they all got a grade over 60 points and the other teams are not qualified at the first stage of final judgment. The total team mean average is 71.79. The research based on wireless searching robot was earned the highest average point among the other teams which is 96.1.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.2
• /
• pp.88-96
• /
• 2013

The objective of this research was to evaluate the suitability of sigmoidal and firstorder kinetic equations for simulating the methane production from solid wastes. The sigmoidal kinetic equations used were modified Gompertz and Logistic equations. Statistical criteria used to evaluate equation performance were analysis of goodness-of-fit (Residual sum of squares, Root mean squared error and Akaike's Information Criterion). Akaike's Information Criterion (AIC) was employed to compare goodness-of-fit of equations with same and different numbers of parameters. RSS and RMSE were decreased for first-order kinetic equation with lag-phase time, compared to the first-order kinetic equation without lag-phase time. However, first-order kinetic equations had relatively higher AIC than the sigmoidal kinetic equations. It seemed that the sigmoidal kinetic equations had better goodness-of-fit than the first-order kinetic equations in order to simulate the methane production.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.39-45
• /
• 2013

PURPOSES : The objective of this study is to evaluate the mechanical characteristics of castor oil based bio-polymer concrete for use of ultra thin overlays. METHODS : To evaluate the mechanical properties of bio-polymer concrete, the various laboratory tests including compressive, tensile, and flexural strength, and elongation tests were conducted on bio-polymer concrete specimens in this study. The mechanical characteristics of bio-polymer concretes were examined by changing the content of hardener and polymer binder to determine the optimum content for ultra-thin overlays. The bio-polymer concrete developed in this study was used for field trial test of the ultra-thin bridge deck pavement for verifying the workability and monitoring the long-term performance of materials. RESULTS : Test results showed that tensile and the flexural strength of bio-polymer concretes increase and the elongation of bio-polymer concrete decreases with increase of binder content. A field adhesive strength tests conducted on bridge deck pavement indicates the bio-polymer concrete has more than 2MPa of adhesive strength satisfy with the design criteria. CONCLUSIONS : The bio-polymer concrete with more than 20% content of castor oil was developed for ultra-thin overlays in this study. It is found from this study that the 35% of hardener content is most appropriate for maintaining the strength characteristics and flexibility.