• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2
• /
• pp.61-67
• /
• 2000

Recent progress in digital and VLSI technology has offered new possibility fer noticeable advance of hearing aids. Yet, environmental noise remains one of the major problems to hearing aid users. This paper describes results which speech recognition performance and speech discrimination performance was measured for listeners with sensorineural hearing loss, while listeners in speech-band noise. In addition, to ameliorate hearing-aided environments of hearing impaired listeners, environmental noise reduction using speech enhancement techniques are investigated as a front-end of conventional hearing aids. Speech enhancement techniques are implemented in a realtime system equipped with DSP board. The clinical test results suggest that the speech enhancement technique may work in synergy with gain functions fer the greater SNR improvement as the preprocessing algorithm of digital hearing aids.

• Journal of Powder Materials
• /
• v.22 no.5
• /
• pp.331-336
• /
• 2015

We report on the succesful fabrication of ZnO nanorod (NR)-based robust piezoelectric nanogenerators (PNGs) by using Cu foil substrate. The ZnO NRs are successfully grown on the Cu foil substrate by using all solution based method, a two step hydrothermal synthesis. The ZnO NRs are grown along c-axis well with an average diameter of 75~80 nm and length of $1{\sim}1.5{\mu}m$. The ZnO NRs showed abnormal photoluminescence specrta which is attributed from surface plasmon resonance assistant enhancement at specific wavelength. The PNGs on the SUS substrates show typical piezoelectric output performance which showing a frequency dependent voltage enhancement and polarity dependent charging and discharging characteristics. The output voltage range is 0.79~2.28 V with variation of input strain frequency of 1.8~3.9 Hz. The PNG on Cu foil shows reliable output performance even at the operation over 200 times without showing degradation of output voltage. The current output from the PNG is $0.7{\mu}A/cm^2$ which is a typical out-put range from the ZnO NR-based PNGs. These performance enhancement is attributed from the high flexibility, high electrical conductivity and excellent heat dissipation properties of the Cu foil as a substrate.

• 전자공학회논문지 IE
• /
• v.49 no.2
• /
• pp.46-51
• /
• 2012

Transmit signal of Enhancement Layer in AT-DMB system is received by Coherent Detection, but in Base Layer of AT-DMB, a differential modulation and demodulation is adopted, same as the T-DMB. Especially for the coherent dectection of enhancement layer in AT-DMB system, a channel estimation must be employed. In this paper, I will show that the BER performance of Base-Layer in AT-DMB system will be improved by using the channel estimation information. The suggested method is focusing the constallations after Equalizaing to the nearlest ${\pi}$/4-shift DQPSK constallation points. Simulation results show that for the non-coding environment, the BER performance of AWGN channel, about 2-dB gain can be achieved at $10^{-4}BER$.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.10
• /
• pp.940-950
• /
• 2011

This paper reports a filtered velocity feedback(FVF) controller, which is an alternative to direct velocity feedback(DVFB) controller. The instability problems at high frequencies due to non-collocated sensor/actuator configuration with the DVFB can be alleviated by the proposed FVF controller. The FVF controller is designed to filter out the unstable high frequency response. The dynamics of a clamped plate under forces and moments and the FVF controllers are formulated. The stability of the control system and performance are investigated with the open loop transfer function(OLTF). It is found that the FVF controller has a higher gain margin than the corresponding DVFB controller owing to the rapid roll-off behavior at high frequencies. Although the gain margin cannot be fully utilized because of the enhancement at the high frequencies, the vibration at the modes lower than the tuning frequency is well controlled. This performance of the FVF controller is shown to be improved from that of the DVFB controller. It is, however, noted that the stability around the tuning frequency is very sensitive so that the enhancement in vibration level should be followed. The reduction performance at low frequencies using the FVF controller should be compromised with the enhancement in the vibration at high frequencies while designing the controller.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.9
• /
• pp.669-675
• /
• 2008

The objectives of this paper are to examine the effect of nano-particles on the pool type absorption heat transfer enhancement and to find the optimal conditions to design a highly effective compact absorber for ammonia/water absorption system. The effect of $Al_2O_3$ nano-particles and carbon nanotube(CNT) on the absorption performance is studied experimentally. The experimental ranges of the key parameters are 20% of ammonia concentration, $0{\sim}0.08\;vol%$ (volume fraction) of CNT particles, and $0{\sim}0.06 \;vol%$ of $Al_2O_3$ nano-particles. For the ammonia/water nanofluids, the heat transfer rate and absorption rate with 0.02 vol% $Al_2O_3$ nano-particles were found to be 29% and 18% higher than those without nano-particles, respectively. It is recommended that the concentration of 0.02 vol% of $Al_2O_3$ nano-particles be the best candidate for ammonia/water absorption performance enhancement.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.85-92
• /
• 2004

A design of a preceding instruction decoding module(PIDM) is proposed aiming at performance enhancement of JTAG-based test complying to the IEEE 1149.1 standard. The PIDM minimizes the number of clocks by performing test access port(TAP) instruction decoding process prior to the execution of TAP-controlled test activities. The scheme allows the generation of signals such as test mode select(TMS) inside of a target system. The design employing PIDM demonstrates 15% performance enhancement with simulation of a CORDIC processor and 48% reduction of the TAP-controller's circuit size with respect to the conventional design of a non-PIDM version.

• Journal of Distribution Science
• /
• v.20 no.7
• /
• pp.1-9
• /
• 2022

Purpose: This study aims to examine the effect of intellectual capital on both internal and external collaboration and its impact on distribution performance enhancement in public sector. Research design, data, and methodology: The study applied quantitative approach with the help of AMOS Structural Equation Modelling. The unit of analysis is the Indonesian local government. The research involved 430 leaders from local government agencies as respondents. Results: This study found that intellectual capital positively influences both internal and external collaboration as well as distribution performance. Furthermore, the current research confirms the different effect of internal collaboration and external collaboration on distribution performance; internal collaboration positively affects distribution performance, while the external one does not. Eventually, internal collaboration mediates the indirect effect of intellectual capital on distribution performance, whereas the external collaboration does not. Conclusions: This study strengthens and complements the lean stream by confirming the role of intellectual capital as critical antecedent of internal collaboration, external collaboration, and distribution performance. Moreover, this research underlines the critical role of internal collaboration as the intercourse which supports distribution performance enhancement in public sector. Lastly, the study highlights the benefits of external collaboration in distribution practice if appropriately and wisely managed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.2 s.314
• /
• pp.37-45
• /
• 2007

We propose an adaptive image enhancement method for epigraphic images, which is based on local statistics. Local statistics of the image are utilized for adaptive realization of the enhancement, that controls the contribution of the smoothing or sharpening paths. Image contrast enhancement occurs in details and noises are suppressed in smooth areas. For modeling the epigraphic image, pre~process is achieved by HSDI(Hanzi squeezed digital image). We have calculated the local statistics from this HSDI model. Application of this approach to HSDI has shown that processing not only smooths the background areas but also improves the subtle variations of edges, so that the word regions can be enhanced. Experimental results show that the proposed algorithm has better performance than the conventional image enhancement ones.

• Journal of Biomedical Engineering Research
• /
• v.28 no.6
• /
• pp.732-743
• /
• 2007

Background noise is one of the major complaints of not only hearing impaired persons but also normal listeners. This paper describes the results of two experiments in which speech recognition performance was determined for listeners with normal hearing and sensorineural hearing loss in noise environment. First, we compared speech enhancement algorithms by evaluation speech recognition ability in various speech-to-noise ratios and types of noise. Next, speech enhancement algorithms by reducing background noise were presented and evaluated to improve speech intelligibility for sensorineural hearing impairment listeners. We tested three noise reduction methods using single-microphone, such as spectrum subtraction and companding, Wiener filter method, and maximum likelihood envelop estimation. Their responses in background noise were investigated and compared with those by the speech enhancement algorithm that presented in this paper. The methods improved speech recognition test score for the sensorineural hearing impaired listeners, but not for normal listeners. The results suggest the speech enhancement algorithm with the loudness compression can improve speech intelligibility for listeners with sensorineural hearing loss.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.165-170
• /
• 2014

Speech enhancement techniques that remove surrounding noise are stressed to preprocessor of speech recognition. Among the various speech enhancement techniques, Codebook-based Speech Enhancement (CBSE) operates efficiently in non-stationary noise environments. But, CBSE has some problems that inaccurate gains can be estimated if mismatch occur between input noisy signal and trained speech/noise codevectors. In this paper, the Normalized Weighting Factor (NWF) is calculated by long-term noise estimation algorithm based on Signal-to-Noise Ratio, compensated to the conventional inaccurate gains. The proposed CBSE shows better performance than conventional CBSE.