• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.4-10
• /
• 1997

The fundamental philosophy underlying the seismic design of structures and systems are evolving into the performance based concept. The background and current status of this development in other countries are briefly summarized. The new code system which consists of two level seismic design criteria will be introduced. The implementation of the preformance based design concepts in the criteria will be explained.

• 한국지반공학회논문집
• /
• 제38권12호
• /
• pp.91-101
• /
• 2022

1995년 일본에서 발생한 고베지진으로 인하여 고베항에 대규모 피해가 발생하면서, 기존 내진설계 기준의 문제점이 제기됨에 따라 기존의 유사정적해석 및 허용응력 설계법으로는 Level II(규모 6.5) 수준의 지진에 대하여 항만 구조물 설계가 불가능한 사실이 지적되어 내진설계에 있어서 성능기반 설계법의 필요성이 대두되었다. 지진이 빈번한 일본 및 미국의 경우 항만시설에 대한 가장 선진화된 설계기준을 도입하여 적용하고 있으며, 기존 내진설계기준을 성능기반설계로 전환하였다. 1999년 이후 현재까지 국내 항만내진설계법은 내진설계가 필요한 시설과 이들의 내진등급에 대한 정의가 불명확한 점에 대해 연구를 통해 필요한 시설과 내진등급에 대한 정의를 확립하고 실험적 검증을 바탕으로 국내 실정에 부합한 성능기반 내진설계법을 확립하고 있는 단계이다. 본 연구에서 개발한 방파제의 성능기반 내진설계법은 원지반의 지표면에서의 가속도 시간이력을 고속 푸리에 변환(FFT) 후 방파제의 해당성능수준별 최대허용변위에 대응한 주파수 특성을 보정해주는 필터처리를 하였고, 필터 처리된 스펙트럼을 다시 가속도 시간이력으로 역변환(IFFT) 하여 가속도 최대값을 산정함으로써 변위를 고려한 등가정적해석을 위한 수평지진계수를 산정하였다. 또한 국내 지진 수준에 맞는 방파제의 성능기반 내진설계법의 검증을 위해서 실험과 수치해석을 수행하였다.

• 설비공학논문집
• /
• 제26권9호
• /
• pp.424-433
• /
• 2014

The purpose of this study is to evaluate the effectiveness in the lighting performance of mixed type light-shelf, by comparing and analyzing the internal light-shelf, external light-shelf, and mixed-type light-shelf. The performance of light-shelf was evaluated according to the angle of light-shelf at summer solstice, winter solstice, vernal equinox, and autumn equinox. The comparative analysis between the internal light-shelf, external light-shelf, and mixed-type light-shelf was carried out using the performance evaluation and analysis method. The result of performance evaluation is shown as follows. The mixed type light-shelf showed the highest lighting performance all at summer solstice, winter solstice, vernal equinox, and autumn equinox, followed by the external light-shelf and the internal light-shelf in the same order. The mixed type light-shelf was the most favorable for bringing daylight to indoors by adjusting the angle of light-shelf, and it also showed the highest lighting performance in terms of uniformity ratio of illumination which indicates the quality of light.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.305-317
• /
• 2020

The navigation message is composed of the information contained in the message and the structure for transmitting this information. In order to design a navigation message, considerations in terms of message content and message structure must be elicited. For designing a Korea Positioning System (KPS) navigation message, this paper explains performance indicators in terms of message structure and message content. Most of the performance analysis of GNSS navigation messages already in operation was performed only for Time-to-first-fix-Data (TTFFD). However, in the navigation message, the message content is composed of Clock-Ephemeris Data (CED) and additional information. So, this paper proposes a new performance indicator R_(Non-CED) that can be analyzed from the viewpoint of receiving additional information along with an explanation of TTFFD focusing on the CED reception time. This paper analyze the performance in terms of message structure using these two performance indicators. The message structures used for analysis are the packetized message protocol like GPS CNAV and the packetized and fixed pattern message protocol like GPS CNAV-2. From the results, it is possible to proffer how KPS navigation messages can have better performance than GPS navigation messages. And, these two performance indicators, TTFFD and R_Non-CED, can help to design the minimum TTFF required performance of KPS navigation messages.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.79-86
• /
• 2004

Tooth errors inevitable in the manufacturing process have large effect on the strength/durability and vibration performances of gear drives. We show that the manufacturing errors affect the overall gear performances, especially vibration performance, and propose a robust optimal design method for gear dimension and its tooth flank form that guarantees reliable performances to the variation of manufacturing errors. This method begins with a search of optimal design candidates by using the previously developed gear optimal design method for the strength/durability and vibration performances. Then, the statistical analysis method is applied to find a robust design solution for the vibration performance which is generally very sensitive to the manufacturing variations.

• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.591-599
• /
• 2005

This paper proposes a systematic design methodology for high-speed/high-precision servomechanisms by using a disturbance observer. A multiplicative uncertainty model and a two degree-of-freedom controller composed of a disturbance observer (DOB) and a PD controller are considered as subsystems. Analysis of the system performance, such as internal stability and bandwidth of a servomechanism according to subsystem parameters is conducted for better understanding of the dynamic behavior and interactions among the subsystem parameters. Then, an integrated design methodology, where the interactions are considered simultaneously, is applied to design processes of the servomechanism. The tradeoff relationship between disturbance suppression and measurement noise rejection of the DOB is considered through the design process. Numerical case studies show the improved possibility to evaluate and optimize the dynamic motion performance of the servomechanism. Moreover, the disturbance observer designed based on the proposed design methodology yields excellent disturbance suppression performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1266-1269
• /
• 2003

Many studies have indicated that most of a product's cost is fixed early in its lift cycle, before the original design cycle is complete. This implies that we should consider various aspects of product lift cycle at the design stage. This means the need of collaboration in design stage. Because the Internet provides instant access to a wealth of design information, the Internet is used by the collaborative design team members as a medium to share data, information and knowledge, and in some cases for product data management and project management by integrating the Web with appropriate technologies. This paper presents a real-time collaborative design system for powerful interaction performance, based on the Internet and Web technologies. Using The system use the client/server architecture and the purpose of the system is to provide a method that enables real-time view, review and modification of the 3D model through the Internet.

• Advances in Computational Design
• /
• 제2권3호
• /
• pp.241-256
• /
• 2017

This paper introduces the process for Multi-objective Optimization Framework (MOF) which mediates multiple conflicting design targets. Even though the extensive researches have shown the benefits of optimization in engineering and design disciplines, most optimizations have been limited to the performance-related targets or the single-objective optimization which seek optimum solution within one design parameter. In design practice, however, designers should consider the multiple parameters whose resultant purposes are conflicting. The MOF is a BIM-integrated and simulation-based parametric workflow capable of optimizing the configuration of building components by using performance and non-performance driven measure to satisfy requirements including build programs, climate-based daylighting, occupant's experience, construction cost and etc. The MOF will generate, evaluate all different possible configurations within the predefined each parameter, present the most optimized set of solution, and then feed BIM environment to minimize data loss across software platform. This paper illustrates how Multi-objective optimization methodology can be utilized in design practice by integrating advanced simulation, optimization algorithm and BIM.

• 한국주거학회논문집
• /
• 제23권1호
• /
• pp.97-105
• /
• 2012

The purpose of this study is to find the characteristics of design council criteria of metropolitan cities in Koreas. For comparative analysis, four main concepts are used ; 1) self-administering vs discretionary 2) prescriptive vs performance 3) conformity vs contrast 4) point system of criteria. The results of this study were as follows; 1) there were three types of cirteria; strong discretionary (DG), discretionary oriented (BS, US) and combination type (SL, DJ, ICN, GJ) 2) structural properties of forms are controlled by prescriptive criteria, and layout or design elements by performance criteria 3) visual openness and diversity are main items of most metropolitan cities 4) street-faced design was neglected but tended to focus on the self-contained layout 5) visual density indexes were diversified from elevation blockage degree. For further advanced research, it is necessary to investigate the actual effects and differences of regulative types - prescriptive vs performance, and of each design criteria, especially prescriptive ones in improving the design quality.

• 한국화재소방학회논문지
• /
• 제28권4호
• /
• pp.50-56
• /
• 2014

성능설계 시험 안을 작성하기 위해서는 건축물에 발생할 수 있는 화재의 크기를 정량화하는 단계가 선행되어야 한다. 이러한 설계화재의 크기가 적합하게 선정되었을 때 화재로부터 안전하면서도 경제적인 설계가 가능하다. 우리나라는 성능설계의 역사가 짧고 공학적 자료가 축적되어 있지 않아 화재의 크기를 선정하는 데에 많은 문제점을 드러내고 있다. 이에, 해외의 설계화재 가이드라인과 국내의 실 화재 실험 자료를 조사하였다. 그리고 국내의 설계화재 선정 사례를 조사하여 그 적정성을 분석하고 건축물의 용도별로 설계화재의 가이드라인을 제안하였다.