• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.1
• /
• pp.33-38
• /
• 2018

This study applied upgrades to the processes of a 10 MW wet amine $CO_2$ capture pilot plant and conducted performance evaluation. The 10 MW $CO_2$ Capture Pilot Plant is a facility that applies 1/50 of the combustion flue gas produced from a 500 MW coal-fired power plant, and is capable of capturing up to 200 tons of $CO_2$. This study aimed to quantitatively measure efficiency improvements of post-combustion $CO_2$ capture facilities resulting from process upgrades to propose reliable data for the first time in Korea. The key components of the process upgrades involve absorber intercooling, lean/rich amine exchanger efficiency improvements, reboiler steam TVR (Thermal Vapor Recompression), and lean amine MVR (Mechanical Vapor Recompression). The components were sequentially applied to test the energy reduction effect of each component. In addition, the performance evaluation was conducted with the absorber $CO_2$ removal efficiency maintained at the performance evaluation standard value proposed by the IEA-GHG ($CO_2$ removal rate: 90%). The absorbent used in the study was the highly efficient KoSol-5 that was developed by KEPCO (Korea Electric Power Corporation). From the performance evaluation results, it was found that the steam consumption (regeneration energy) for the regeneration of the absorbent decreased by $0.38GJ/tonCO_2$ after applying the process upgrades: from $2.93GJ/ton\;CO_2$ to $2.55GJ/tonCO_2$. This study confirmed the excellent performance of the post-combustion wet $CO_2$ capture process developed by KEPCO Research Institute (KEPRI) within KEPCO, and the process upgrades validated in this study are expected to substantially reduce $CO_2$ capture costs when applied in demonstration $CO_2$ capture plants.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.137-164
• /
• 2018

The guarantee of the performance of the engineered barriers in a geological repository is very important for the long-term safety of disposal as well as the efficient design of the repository. Therefore, the performance of the engineered barriers under repository condition should be demonstrated by in-situ experiments conducted in an underground research laboratory. This article provides a review of the major in-situ experiments that have been carried out over the past several decades at underground research laboratories around the world to validate the performance of engineered barriers of a repository, as well as their results. In-situ experiments to study the coupled thermal-hydraulic-mechanical behavior of the engineered barrier system used to simulate the post-closure performance of the repository are analyzed as a priority. In addition, in-situ experiments to investigate the performance of the buffer material under a real repository environment have been reviewed. State-of-the art in-situ validations of the buffer-concrete interaction, and the installation of the buffer, backfill and plug, as well as characterization of the near-field rock and the corrosion of the canister materials are, also performed.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.3 no.2
• /
• pp.25-30
• /
• 2007

The final energy consumption in the building sector in Korea represents almost 20% of the total energy consumption. Besides, Space heating and hot water generation in Korea are based on fossil fuels, with a serious environmental impact. This study describes thermal performance of heating demonstration system using close-loop ground source heat pump installed at Korean minjok leadership academy. The results of the experimental study, it retrieve the investment cost for 3years 8months and reduction amount of $CO_2$are 293,900 $kgCO_2$.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.4
• /
• pp.346-350
• /
• 2009

Although salt is known to influence the performance of nitrification significantly, it has not been well reported on how salt affects ammonia-oxidizing bacterial(AOB) community compositions and dynamics in wastewater treatment bioreactors. In this study, these questions were evaluated in a full-scale bioreactor treating saline wastewater. Clone library analysis for the ammonia monooxygenase subunit A gene revealed that AOB belonging to the Nitrosomonas europaea and the N. oligotropha lineages inhabited in the bioreactor. Terminal restriction fragment length polymorphism analysis for monthly samples demonstrated a fluctuation pattern among AOB populations, although AOB within the N. europaea lineage were dominant during the test period. Correlation analysis between patterns of terminal restriction fragments and environmental variables suggested that sodium, chloride, and sulfate were less important; rather, temperature was the most significant factor affecting the AOB community in the bioreactor.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.2
• /
• pp.407-414
• /
• 1995

원자력발전소의 주요 기기들에 대한 가동중검사는 관련법규에 따라 철저히 수행되고 있다. 그러나 최근 선진국에서는 이에 만족하지 않고 원전 기기의 안전성을 더욱 확고히 하기 위해 기존의 가동중검사 요건을 계속 강화하고 있으며, 원전 관련 당사자들은 강화된 요건들을 충족시키기 위한 노력을 끊임없이 계속하고 있다. 이 글에서는 원전 기기 가동중검사 신규 요건들인 초음파탐상검사 시스템의 기량검증(Performance Demonstration) 요건, 비파괴검사자 및 초음파검사자 자격 인정 요건(ANSI/ASNT CP-189, Appendix VII of ASME Sec. XI), 증기발생기 전열관 와전류검사, 신호평가자 자격인정(Qualified Data Analyst : QDA), 미국규제기관(NRC)에서 발행하고 있는 NRC Bulletin, NRC information 등의 가동중검사 관련 사항들을 살펴보고 선진 외국에서는 이들 요건 및 정보에 대해 어떻게 대처하고 있는가를 알아본다. 또한 국내에서도 이들 신규 요건에 대한 대처 현황과 대처 방안을 모색한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.2
• /
• pp.48-60
• /
• 1993

1974년에 유럽에서 시작된 PISC(Program for the Inspection of Steel Components ; PISC-I, II, III) 수행결과나 1980년대초 실시된 미국의 BWR 원전 배관계통의 입계응력부식균열(IGSCC ; Intergranular Stress Corrosion Cracks)검사결과에서 나타난 바와 같이 기존의 규격 요건과 절차에 따른 원자력발전소 기기에 대한 초음파탐상검사는 그 실효성에 많은 문제점이 제기되었다. 따라서, 원전기기의 건전성 및 초음파탐상검사 결과의 신뢰도를 보증하기 위한 각종 연구가 진행되고 여러 방안이 모색되어 왔다. 그 결과, 원전 가동중검사 규격에 "초음파탐상검사자 자격인정 요건"과 "초음파탐상검사 시스템(검사자, 장비 및 절차서)에 대한 기량검증 요건"이 새로이 부가되었다. 본고에서는 초음파탐상검사 결과의 신뢰도 확보에 있어 필수불가결한 요건인 원전기기 초음파 탐상검사 시스템에 대한 기량검증 요건을 자세히 기술한다.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.138-145
• /
• 2010

In this paper, we report the test results of a small-scale prototype that implements an analogue-beam-formed phased antenna array in the E-band. A four-channel dual-conversion receive RF module for 71~76 GHz frequency band has been developed and integrated with a linear end-fire antenna array. Measured performance is very close to the simulated results. An ad-hoc wireless communication system has also been demonstrated. Low BER was measured for an 8PSK data stream at 1.5 Gbps with the receive array beam formed in the direction of arrival of the transmitted signal. To our knowledge this is the first steerable antenna array reported to date in the E-band.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.966-970
• /
• 2005

On the basis of the development of KSLV-1, KoDSat was designed and manufactured to demonstrate the performance of KSLV-1. KoDSat is exposed to a severe vibrational environment at launch. The structural reliability of KoDSat has to be verified using vibrational test. The structural compatibility and verification of components between analysis and test can be proved using environmental vibration test. In this paper, we review the structural characteristic of thruster control unit for a space launch vehicle and design TCU housing using mathematical model. In order to verify the structural compatibility and reliability, half-sine shock, random and sing sweep vibration test was performed. Especially, sing sweep vibration test result is compared with analysis result and mathematical model is verified.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.27-32
• /
• 1997

In this paper, a new multigrid method is developed to solve the reactor eigenvalue problems. The new algorithm can be used in any matrix equation concerned with the eigenvalue problem. The finite difference neutron diffusion problem is considered demonstration of the performance of the new multigrid algorithm. The numerical results show that the new multigrid algorithm works well and requires much shorter (7~10 times) computing time compaired to the production code VENTURE.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.684-687
• /
• 2005

KIER has been running a demonstration project for 10kWe solar thermal power generation. the project is to build and operate the first solar thermal power generation system in Korea. For concentrating solar thermal energy $40m^2$ dish type concentrator was adapted and a stirling engine is going to be integrated to the system for power production. At the moment building the dish concentrator including mirror and sun tracking system was completed and it's performance are being closely evaluated. This paper will introduce some detailed designs and construction procedures which we have experienced so far.