• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.30-37
• /
• 2005

This study aimed at offering basic data to develop a new use of sawdust and rice husk. Research investigated the variation of density, weight loss and dimensional decreasing rate by the percentage of resin impregnation and carbonization temperature of ceramics, which were formed by the percentage of resin impregnation of 40~80% and carbonization of $600{\sim}1200^{\circ}C$ with board impregnated with phenolic resin made from sawdust and rice husk. The results of this study were as follows:1) As the percentage of resin impregnation increased, the thickness shrinkage and weight loss were decreased; on the other hand, density and modulus of rupture increased. Meanwhile, the carbonization temperature at $1200^{\circ}C$ showed the highest values, as the density was $0.81g/cm^3$ and the bending strength was $77.9kgf/cm^2$ in the percentage of resin impregnation at 70%. 2) As the carbonization temperature grew higher the linear shrinkage, thickness shrinkage and weight loss increased while the density increased until the carbonization temperature of $1000^{\circ}C$; but then decreased slightly at $1200^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.39-46
• /
• 2008

Repeated impregnation and carbonization processes were performed to prepare high-density woodceramics using a sawdust board. The physical properties were investigated to confirm morphological and structural changes of one-time and two-time phenolic resin-treated and carbonized woodceramics. As comparing between one-time and two-time carbonized woodceramics, the weight and the density of the two-time carbonized woodceramics decreased with an increase of the amount of impregnated phenolic resin. In addition, when the amount of impregnated phenolic resin was about 40% in these woodceramics, the two-time carbonized woodceramics showed higher weight (23.8%) and density (30.0%) than the one-time treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.335-342
• /
• 2017

This study was carried out to explore a new application of the by-products sawdust, formed during sawing and mandarin peels which are agricultural by-products. The boards were manufactured by mixing the sawdust and mandarin peels at different mixing ratio and density. The boards were then converted to ceramics by various percentage of resin impregnation and at different carbonization temperatures. As the percentage of resin impregnation increased, the weight loss was decreased; on the other hand, density, linear shrinkage and thickness shrinkage increased. As the carbonization temperature increased, the weight loss was increased and linear thickness shrinkage increased to $1000^{\circ}C$ and the subsequent increase was insufficient. As the percentage of mandarin peels addition increased, the weight loss, linear shrinkage and thickness shrinkage was decreased.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.251-257
• /
• 2014

For new use development of miscanthus sinensis var. purpurascens, which investigated properties of ceramics made from different carbonization temperature ($600{\sim}1,200^{\circ}C$) and percentage of resin impregnation(30~60%) using a mincanthus board. As the carbonization temperature increased, the density, thickness shrinkage, linear shrinkage, weight loss were increased. As the percentage of resin impregnation increased, the density, linear shrinkage and weight loss were increased. On the other hand, thickness shrinkage decreased.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.420-427
• /
• 2014

The physical and mechanical properties of sawdust-rice husk mixed ceramic were investigated with rice husk mixing ratios. The mixed ceramic board was produced with carbonization and resin impregnated sawdust-rice husk board at high temperature. At the same percentage of resin impregnation condition, density and bending strength of the mixed ceramic board increased with increasing the mixing rates of rice husk, whereas weight loss of the ceramic boards decreased. At the same temperature condition for the carbonization of resin impregnated sawdust-rice husk board, the density and bending strength were the highest with 40% of rice husk mixing ratio.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.9-13
• /
• 2007

Using sawdust boards made of pine by differing the percentage of resin impregnation, wood-ceramics were manufactured by carbonizing temperature at $650^{\circ}C$. Their electrical properties and surface temperature were measured by sending an electric current. As electrical resistance of woodceramic was lower, its surface temperature, even in a low voltage, became higher. It seemed to be necessary to applying higher voltage to the woodceramic to raise the surface temperature by target temperature $70^{\circ}C$ or more in this study, according as resistance increased. When the voltage increased, woodceramics showed higher level all in electric current, electric power and surface temperature. Arrival time, electric current and electric power increased with increase of target temperature under constant voltage.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.69-75
• /
• 2001

This study was carried out to investigate the properties of woodceramics made from thinned logs of Cryptomeria japonica. In order to find the effect of steam injection time on the woodceramics fabricated with boards, boards were made with the non-steamed treatment and steamed treatment 1, 5, 10 min. at $250^{\circ}C$. The percentage of weight loss was proportional to the increased density of board The reducing rate of length and thickness, however, decreased with increasing density of board. The rate of weight loss, length and thickness reduction in non-steamed board were slightly higher than those of steamed board. When the resin impregnation rate increased, the bending strength and compressive strength of woodceramics had a tendency to increase. The bending strength and compressive strength of woodceramics in non-steamed board was higher than those of steamed board. But there was little difference between dimensional and strength properties of woodceramics and steam injection time of board.