• 제목/요약/키워드: percent T

검색결과 1,008건 처리시간 0.028초

운동강도의 차이가 안정시대사량 및 에너지 소비량에 미치는 영향 (Effects of Changes in Exercise Intensity on Resting Metabolic Rate (RMR) and Energy Expenditure in Young Men)

  • 곽이섭;진영완;박찬호
    • 생명과학회지
    • /
    • 제15권3호
    • /
    • pp.352-358
    • /
    • 2005
  • The purpose of this study was to examine the effect of various exercise intensity on Resting Metabolic Rate (RMR), excess post exercise energy expenditure (EPEE), and thyroid hormonal changes in trained (TR) and untrained (UT) people. The subject of the present study were divided into two groups and four periods: trained (TR; n=6) and untrained (UT; n=6) group. And the periods were divided as follows; Resting (R), Maximal (M), High intensity (H), and Low intensity (L). The percent body fat and RMR of all subjects were measured at every periods. The RMR was measured early in the morning following a 12-hour fast using MMX3B gas analyzer and blood sample were collected from the anticubital vein to investigate thyroid hormonal (T3, T4, Free T3, Free T4, & TSH) changes. All the RMR values were expressed as absolute value/BSA $(kcal/d/m^2)$. And We also analyzed mean energy expenditure for 30 minutes during and after different intensity exercise. There was significant difference in RMR among different intensity of exercise. in TR (p < .05) not in the UT group. however, there was no significant different percent body fat in TR and in UT group. In the energy expenditure, there was significant different between TR and UT in HEE (high intensity exercise energy expenditure), LEE (low intensity exercise energy expenditure), HEEPE (high intensity exercise energy expenditure post exercise) & LEEPE (low intensity exercise expenditure post exercise). In the hormonal level, there was significant different in T4 level in the TR group at H period and in T4, Free T3, & Free T4 levels in TR group at L period, however there was no significant different in the UT group. The present cross-sectional study was design to investigate the relationship between exercise intensity and RMR. The focus of this investigation was to compare RMR in aerobically trained (TR) and untrained (VI). The relationship among RMR, exercise intensity and percent body fat would best be investigated using MMX3B and body composition analyzer. Each subject completed measurement of percent body fat, RMR, hormone in the period of maximal oxygen uptake exercise (M), high intensity exercise (H), and low intensity exercise (L). From the results, Low intensity of exercise (L), there was a trend for an increased RMR (kcal/day) in the TR not for the UT. This is best explained not by the reduced percent body fat but by the highly induced energy expenditure (during exercise and post exercise energy expenditure) and increased T4, Free T3, and Free T4 hormonal levels in the low intensity exercise for the TR group.

Effect of Feeding Bypass Protein with Urea Treated Grass on the Performance of Red Kandhari Calves

  • Wankhede, S.M.;Kalbande, V.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제14권7호
    • /
    • pp.970-973
    • /
    • 2001
  • An experiment was carried out to assess the effect of feeding concentrate mixtures varying in bypass protein levels with urea-treated or untreated grass on the performance of twelve Red Kandhari calves (14 months of age and 78.15 kg body weight) for a period of 75 days. Dry grass was treated with 4 percent urea solution and ensiled for 30 days. The CP ($N{\times}6.25$) content in urea treated grass increased from 3.96 to 8.89 percent. Two iso-caloric and iso-nitrogenous concentrate mixtures (CM-I and CM-II) varying in RDP to UDP ratio viz., 65:35 and 55.45 were prepared. The calves in control group ($T_1$) were fed concentrate mixture-I with ad libitum untreated dry grass and those in experimental group ($T_2$) were fed concentrate mixture-II with ad libitum urea treated dry grass. The dry matter consumption in group $T_2$ was significantly (p<0.01) higher as compared to group $T_1$. The total DMI in $T_1$ and $T_2$ was 146.92 and 166.95 kg respectively, whereas the DMI per day and per 100 kg body weight was 1.94 and 2.22 and 1.90 and 2.35 kg, respectively. The average total gain in body weight (kg) and average daily gain (g) of calves in $T_2$ was significantly (p<0.01) higher as compared to those in $T_1$ the values being 28.66, 18.33 and 382.16, 244.44, respectively. Feed efficiency in terms of kg DM per kg gain in body weight was significantly (p<0.01) lower in group $T_1$ than in $T_2$. The cost of feed per kg gain in body weight for $T_2$ and $T_1$ group was Rs. 21.14, 28.22, respectively. The digestibility coefficients of DM, CP, EE, CF, NFE, NDF and ADF were 59.60, 57.50, 53.00, 65.04, 45.82, 48.48, 52.48 and 55.73 for $T_1$ group. The coressponding values were 68.78, 67.80, 59.83, 71.41, 49.93, 53.37 and 57.81, respectively for $T_2$ group. The digestibility coefficients for all the proximate principles in $T_2$ were significantly (p<0.01) higher as compared to $T_1$. However, NDF and ADF digestibilities were not significantly different. Nutritive value determined in terms of DCP and TDN for The experimental ration was significantly (p<0.01) higher than control ration, the values being 7.32 and 47.34 and 9.39 and 52.40% respectively. The blood urea nitrogen levels at 0, 3 and 6 h interval after feeding were significantly (p<0.01) lower in calves fed experiment ration as compared to control. The overall results indicated that in Red Kandhari calves an optimum growth can be economically achieved by feeding 4 percent urea treated dry and mature grass as basal roughage supplemented with a concentrate mixture containing 20 percent CP, 70% TDN and 45% UDP/bypass protein.

삽입재를 사용한 A2024-T6와 SM45C의 마찰용접에 관한 연구 (A Study on Friction Welding of A2024-T6 and SM45C using Insert Metals)

  • 강성보;윤병수;민택기
    • Journal of Welding and Joining
    • /
    • 제16권5호
    • /
    • pp.48-55
    • /
    • 1998
  • This study was undertaken to investigate the friction welding of A2024-T6 aluminum alloy and SM45C carbon steel using insert metals. The relationships among the friction welding conditions, the tensile strength of joints, the hardness distribution of welds, the microstructure of welds and the tensile fracture surfaces were mainly investigated through this experiment. When the A6063-T5 aluminum alloy of insert metal was used, the maximum tensile strengh of joint was obtained. In this case, the maximum joint efficiency was 75.3 percent and in the case of unusing the insert metals, it was 37.7 percent. Optimal welding conditions were N=2000rpm, P$_1$=40MPa, P$_2$=140MPa, t$_1$=1.0sec and t$_2$=5sec.

  • PDF

향기흡입법이 발치 전·후에 미치는 불안과 통증에 관한 연구 (A Study on the Effect of Aroma Therapy on Anxiety and Pain Before and After Tooth Extraction)

  • 정미애
    • 한국치위생학회지
    • /
    • 제4권1호
    • /
    • pp.105-117
    • /
    • 2004
  • The purpose of this study was to examine the effect of aroma therapy on anxiety and pain before and after tooth extraction. The subjects in this study were 60 patients who felt severe anxiety and pain due to tooth extraction. The experiment was conducted from January through March, 2004, by organizing an experimental group and a control group with 30 patients each. The experimental group was asked to keep wearing lavender-containing necklaces from two days before tooth extraction to inhale lavender, and no such an action was taken to the control group. The collected data were analyzed with SPSS 10.0 program to obtain statistical data. and ${\times}2$ test and t-test were implemented. The findings of this study were as follows: 1. Regarding whether or not the experimental and control groups were homogeneous, men outnumbered women, and the largest number of the patients were in their 30s. Those who were married were more than the others who were unmarried in number, and those who lived with their spouses under the same roof together outnumbered the others who didn't, as the rate of the former stood at 65 percent in the experimental group and 86.4 percent in the control group. They expressed high satisfaction at their spouses, since 45 percent of the experimental group and 31 percent of the control group did it, but the difference between them and those who were unsatisfied was insignificant (pE0.347). By occupation, the largest number of people in the experimental group, which numbered 16.7 percent, were self-employed, and lots of patients in the control group were government workers. As for blood type, type A was most prevailing, which recorded 43.3 percent. By religion, 43 percent of the experimental group had no religion, whereas 36.7 percent of the control group were Christian. The most common monthly income ranged from 2 million to 2.5 million won. 2. There was little disparity in past pain experience between the two groups before aroma therapy was applied. The experimental group underwent more pain (6.15) than the control group (5.78), but the difference wasn't significant. The experimental group (90%) experienced more anxiety and fear than the control group(83%), but the difference was insignificant. This fact showed that there was little gap between the two groups in anxiety and fear caused by tooth extraction. Contrary to earlier expectation that pre-anxiety might not be the same. little significant difference was found. 3. After aroma therapy was applied, 50 percent of the experimental group and 23.3 percent of the control group suffered significantly less anxiety and fear about tooth extraction(${\times}2$=4.59, pE.05). And the experimental group exposed to aroma therapy was less nervous(3.0) than the control group(4.39), and the gap between the two was significant (t=13.37, pE.001). Therefore, aroma therapy had a good effect on alleviating their anxiety. During tooth extraction. 73.3 percent of the experimental group and 93.3 percent of the control group felt pain. The former group suffered Significantly less pain(${\times}2$=4.32, PE.05). Concerning the extent of pain, the experimental group(2.53) found it less painful to have their teeth extracted than the control group(5.50), and the gap between the two was significant(t=5.89, PE.05). 4. As to the effect of aroma therapy on alleviating anxiety or fear, the experimental group(33.3%) felt that aroma therapy let them more relieved. Every member of that group was willing to use aroma therapy again in the future, and 86.7 percent of that group perceived that aroma therapy made a difference to dental treatment. The experimental group responded to aroma therapy favorably, as every member of it had an intention to advise others to use that therapy.

  • PDF

수입 솔로몬산(産) 미이용(미利用) 수종(樹種)의 인공건조(人工乾燥)스케쥴 개발(開發) (Development of Kiln Drying Schedule of Lesser-Known Species Imported from Solomon)

  • 정희석;심재현
    • Journal of the Korean Wood Science and Technology
    • /
    • 제14권1호
    • /
    • pp.45-54
    • /
    • 1986
  • A study was conducted to determine the physical properties related to drying characteristics, the seasonal air drying curves and the kiln drying schedule for taun lumber imported and utilized. This kiln drying schedule was found by oven drying and developed by pilot testing of green lumber and partially air dried lumber. The results of this study were as follows; 1. Average green specific gravity and standard deviation of heartwood lumber were 0.60${\pm}$0.03 and those of sapwood lumber were 0.64${\pm}$0.02. 2. Radial shrinkage from green to air dry and from green to oven dry were 3.05 percent and 5.96 percent respectively, and tangential shrinkage from green to air dry and to oven dry were 5.49 percent and 8.74 percent respectively. 3. Drying time for 25mm thick green lumber (50 percent moisture content) air dried to 30 percent moisture content were 14 days in springtime. 6 days in summertime, and 12 days in autumntime, whereas for 50mm thick lumber in 36 days in springtime, 18 days in summertime, 38 days in autumntime. 4. Kiln drying schedules developed by oven drying were T8-B3 for 25mm thick lumber and T5-B2 for 50mm thick lumber. 5. Kiln drying curves of green 25mm and 50mm thick lumber were similar to those of partially air dried lumber from the level of 30 percent average moisture content. Green 25mm thick lumber (55.7 percent moisture content) was dried to 9.3 percent moisture content in 101.5 hours and green 50mm thick lumber (65.6 percent moisture content) was dried to 11.5 percent moisture content in 526 hours. 6. End checking for green 25mm thick lumber occured in 49.6 percent moisture content and reached maximum amount in 27.6 percent moisture content and closed in 15.8 percent moisture content. 7. End checking for green 50mm thick lumber and partially air dried lumber developed and reached maximum amount earlier then for 25mm thick lumber. 8. Final moisture content of surface layer for 50mm thick lumber was one half of that of core, and moisture content equalized in the lumber after nine days of room conditioning. 9. Casehardening for 50mm thick lumber was slight and was conditioned after nine days of room stroage. 10. Drying defects, such as end checking and surface checking, were not observed and the quality of dry lumber was first.

  • PDF

급속건조법(急速乾燥法)에 의한 은수원사시재(材)의 인공건조(人工乾燥)스케쥴 개발(開發) (Development of Kiln Drying Schedule of Hydrid Aspen (Populus alba × glandulosa) by Oven Drying Method)

  • 이형우
    • Journal of the Korean Wood Science and Technology
    • /
    • 제15권2호
    • /
    • pp.113-119
    • /
    • 1987
  • A study was conducted to determine the kiln drying schedule for hydrid aspen, This kiln drying schedule was found by oven drying method and developed by pilot testing of 2.0cm, 2.5cm, 3.0cm-thick green lumber. The results of this study were as follows: 1. Kiln drying schedule developed by oven-drying method was $T_{12}-E_5$ for 2.5cm-thick green lumber. 2. Drying times for 2.0cm-thick green lumber(127.0 percent moisture content) to 7.3 percent moisture content, for 2.5cm-thick green lumber(95.0 percent moisture content) to 9.7 percent moisture content, and for 3.0cm-thick green lumber(118.5 percent moisture content) to 10.0 percent moisture content were 45 hours, 45 hours, and 54 hours, respectively. 3. Drying rate from 90 to 10 percent moisture content of 2.5cm-thick lumber was about 0.7 times faster than that of 2.0cm-thick lumber and about 1.1 times faster than that of 3.0em-thick lumber. 4. End checks for 2.0cm-, 2.5cm-, and 3.0cm-thick green lumber occurred 95, 74 and 100 percent moisture content, respectively and reached maximum amount in 53, 41, and 60 percent moisture content, respectively. 5. No surface check and no honeycomb occurred. 6. Cupping and collapse slightly occurred and the quality of dry lumber was first.

  • PDF

서울시내 일부여고생들의 안경착용률 및 시력보호에 대한 지식과 태도에 관한 연구 (A Study on Girls' High School Students for Knowledge and Practice of Eyesight Care)

  • 김윤희;곽정옥
    • 보건교육건강증진학회지
    • /
    • 제10권1호
    • /
    • pp.87-97
    • /
    • 1993
  • The purpose of this study is to give practical information about eyesight care-preventing refractive error and actual conditions of wearing glasses(or contact lenses) to help school health education, For this study, 1,216 freshmen were sampled from liberal and vocational high schools in Seoul and the survey was successfully accomplished. Following are the major findings results of this study: 1. The percentage of the freshmen wearing glasses in girls high school were 57.5 percent in liberal high school and 41.7 percent in vocational high school. 2. The percentage of both the students and parents wearing glasses were 49.9 percent in liberal high school and 33.8 percent in vocational high school. 3. From the survey, the majority of the students began to wear glasses during their middle school years. The percentages were 46.6 percent in liberal high school and 62.1 percent in vocational high school. 4. The percentage of the students who got their glasses prescribed from an ophthalmic clinic were 60.6 percent in liberal high school, 31.5 percent in vocational high school and the rest got their glasses from the optician.. 5. The percentage of the students wearing glasses who didn't have optometry check-up for 6 months were 57.2 percent in liberal high school and 38.4 percent in vocational high school. The percentage of the students not wearing glasses in the same situation were 61.9 percent in liberal high school and 41.5 percent in vocational high school. 6. The percentage of the students who believe that the health education in school is necessary for the prevention of amblyopia were 79.2 percent of strdents attending in liberal high school, 82.9 percent in vocational high school, 81.5 percent of students wearing glasses and 80.8 percent of students not wearing glasses.

  • PDF

Acute Myeloid Leukemia with t(8;21)(q22;q22) (AML1/ETO) in a Patient with Marked Hypocellularity and Low Blasts Count

  • ;조희순
    • Journal of Yeungnam Medical Science
    • /
    • 제24권1호
    • /
    • pp.85-90
    • /
    • 2007
  • 세계보건기구의 분류에 따르면 8번 염색체와 21번 염색체의 전위인 t(8;21)(q22;q22)를 가진 경우는 말초혈액이나 골수에 모세포가 20% 미만이더라도 급성골수성백혈병으로 분류하여야 하며, 이는 흔하지 않은 소견이다. 뿐만 아니라 이런 아형의 백혈병에서 골수의 저세포 충실도는 매두 드물다. 저자들은 골수세포충실도가 5% 미만으로 심하게 감소되어 있고, 골수의 모세포도 20% 미만인 환자에서 t(8;21)을 관찰하여 급성골수성백혈병으로 진단한 1례를 보고하는 바이다. 항암치료에 잘 반응하고 동종골수이식의 생착이 잘 이루어져, t(8;21)을 가진 일반적인 고세포충실성 급성골수성백혈병과 유사하게 좋은 예후를 가지는 것으로 생각된다.

  • PDF

Ability of Modified Glucomannan to Sequestrate T-2 Toxin in the Gastrointestinal Tract of Chicken

  • Reddy, N.B.;Devegowda, G.;Shashidhara, R.G.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권2호
    • /
    • pp.259-262
    • /
    • 2004
  • The ability of Modified Glucomannan (MG) to bind T-2 toxin (T-2) in the gastrointestinal tract has been tested in vivo by feeding 120 five-wk-old broiler chicken with the following six treatment diets, 1) Control diet; 2) Control+MG (0.1%); 3) Control+T-2 (500 ppb); 4) Control+T-2 (500 ppb)+MG (0.1%); 5) Control+T-2 (1,000 ppb) and 6) Control+T-2 (1,000 ppb)+MG (0.1%). Twenty birds were assigned to each treatment group, which had five experimental groups. Four birds of each experimental group were sacrificed at an interval of 30 min i.e. at 0, 30, 60, 90 and 120 min after feeding experimental diets. The whole gut contents of each bird were collected, dried and toxin concentration was determined. Percent T-2 recovered from the gut was significantly lower (p<0.05) in the groups fed MG at all the time intervals. The percent T-2 adsorbed by the MG at different T-2 levels (500 and 1,000 ppb) was 15.97 and 14.77, 22.53 and 22.67, 26.88 and 28.03, and 31.50 and 31.83 at 30, 60, 90 and 120 min, respectively.

Carbon black-Polymer 복합재료의 전도임계 현상에 대한 고찰 (A study on the conductive critical behavior of Carbon black-polymer Composites)

  • 김한성;김재오
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
    • /
    • pp.508-510
    • /
    • 1987
  • The variation electrical resistivity of Carbon black filled polymers with volume percent of carbon black was investigated. The relationships between the surface tension of polymer and dispertion effect of carbon black were studied to find the steep drop of electrical resistivity. The critical volume percent of carbon black increased with the increasing surface tension of polymer. The PTC intensity decreased with the increasing volume percent of carbon black.

  • PDF