• 제목/요약/키워드: percent C

검색결과 1,602건 처리시간 0.028초

제조방법에 따른 압전 세라믹-고분자 복합소재 특성 (Characteristics of piezoelectric ceramic-polymer composites by fabrication methods)

  • 고현필;김상식;정경근;유광수;최지원;윤석진
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.710-713
    • /
    • 2003
  • The PZT(KP12) powder was synthesized by sintering at $1250^{\circ}C$ for 2hrs and wet milling for 24 hrs. The PZT composite mixed with PVdF was fabricated into bulk, sheet, and plate type and the characteristics of three types were estimated. The bulk type which has PZT volume percent of 70 showed the best piezoelectric constant. Dielectric constant increased exponentially as an increase of PZT volume percent. The figure of merit of bulk and plate type was better than pure PZT over PZT volume percent of 50.

  • PDF

석회류제의 시용이 엽연형 황피발생 억제에 미치는 영향 (Effects of Some Liming Materials Application on the Alleviation of the Symptoms of Mn Toxicity Inculding Marginal Leaf Chlorosis)

  • 이태수;김명수;홍순근
    • Journal of Ginseng Research
    • /
    • 제14권1호
    • /
    • pp.44-49
    • /
    • 1990
  • Effect of liming material application on the prevention or cure of Mn toxicity symptoms including marginal leaf chlorosis in 3-year-old ginseng plants grown in acidic soils were investigated. It was found that the ratio of Fe to Mn was above about 0.5 and the ratio of Mn to Fe was below about 2.00 in 4-year old ginseng leaves when liming materials were applied in field experiments. It was apparent that the occurrence of marginal leaf chlorosis was decreasing affected by application of Ca, Mg and Fe. The appearance of marginal leaf chlorosis was decreased to about 78 percent in 4-year-old ginseng and to about 69 percent in 5-year-old ginseng, and then the fresh root weight was increased up to 66 percent in 4-year ginseng plants.

  • PDF

가금학 분야 연구 논문 초록 (Abstracts of Research Papers in Poultry Science)

  • 세계가금학회한국지부
    • 한국가금학회지
    • /
    • 제4권1호
    • /
    • pp.66-74
    • /
    • 1977
  • 닭의 혈액상에 관한 발표는 많으나 아직 우리나라에서의 보고는 거의 없다. 이에 산난능력이 우수한 닭과 병계에 대한 앞으로의 혈액학적 연구를 위한 기초적자료를 얻고저 임상적으로 건강한 소위 한국 재내종(LCH)과 백색레그혼 (WLH)암탉의 정상 혈액학치 즉 적혈구, 백혈구, 혈색소, 헤마토크리프. 평균적혈구 용적, 평균 적혈구 혈색소량. 평균 적혈구 혈색소 농도 등을 조사하였다. 1 R.B.C.는 L.C.H.에서 3.18$\pm$0.10million per c$\mu$. mm였으며 W.L.H.는 3.23$\pm$0.05였다. 2. W.B.C.는 L.C.H에서 42.17$\pm$3.35, thousand per. c$\mu$mm였으며 W.L.H.는 35.64$\pm$2.89였다. 3. Hemoglobin치는 L.C.H.에서 11.24$\pm$0.30gm per 100$m\ell$였으며 WL.H.는 38.40$\pm$0.75였다. 4. Hematocrit치는 L.C.H.에서 34.00$\pm$0,98 percent였으며, W.L.H.는 33.40$\pm$0.75였다. 5. M.C.V.는 L.C.H에서 103.66$\pm$1.22 c$\mu$ 였으며, W.L.H.는 103.32$\pm$1.28이였다. 6. M.C.H,는 C.L.H.에서 34.19$\pm$0.41 $\mu$ $\mu\textrm{g}$9였으며. W.L.H,는 34.37$\pm$0.31이었다. 7. M.C.H.C는 L.C.H.에서 33.09$\pm$0.22 percent였으며, W.L.H.는 33.25$\pm$0.36 0.36이었다. (중략)

  • PDF

하수처리장(下水處理場)에서 반송수(返送水)의 성장(性狀)과 영향(影響) (The Sidestream from WWTP; Its Characteristics and Effects on the Main Process)

  • 최의소;이호식
    • 대한토목학회논문집
    • /
    • 제13권1호
    • /
    • pp.233-241
    • /
    • 1993
  • 도시 하수처리장에서 발생되는 반송수의 성상과 처리계통에서의 영향을 검토하기 위해 본 연구가 수행되었다. 각 단위 공정별 반송수의 유량과 분석자료를 이용하여 물질수지를 작성한 뒤 반송수의 특성을 결정하였으며 실험실 완전혼합 활성슬럿지 반응조를 현장 운전 조건과 유사한 방법으로 운전하여 반송수의 영향을 살펴보았다. 연구 결과 반송수의 유량은 유입원수량에 대해 1.2-1.8%로 적은 양이지만 높은 농도로 인하여 유기물과 영양소 부하량은 평균 부하시 20-30% 정도로 증가되고 있었으며 충격부하시는 40-70 %까지 증가되고 있었다. 혼합하수의 침전효율은 BOD 30%, SS 45%를 나타내고 있으나, 반송수에 의한 부하증가로 인해 BOD의 제거효율은 원수 기준시 10% 미만으로 떨어져 포기조에 큰 영향을 미치고 있었다. 즉, 반송수의 평균부하가 포기조에 유입되는 경우 반송수의 유입이 없는 경우에 비해 10%의 BOD 제거효율이 저하되었고 충격부하시는 80% 이상의 BOD 제거효율을 얻을 수 없었으며 50% 이하의 질산화율에 불과하였다.

  • PDF

연속상온 통풍에 의한 고수분 벼의 In-Bin 건조에 관한 연구 (In-Bin Drying of High-Moisture Paddy with Continuous Blowing of Ambient Air)

  • 최홍식;임종환;김성곤
    • 한국식품과학회지
    • /
    • 제14권3호
    • /
    • pp.271-275
    • /
    • 1982
  • 철제 grain bin(지름 3미터, 높이 3.17미터)을 이용하여 수분함량이 높은 벼(밀양 30호)의 자연통풍건조시험을 우리나라 가을 기후조건하에서 행하였다. 이때의 시료벼의 초기수분함량은 평균 24.5%, 시료 벼의 량은 4.19M/T, bin 내에서의 시료벼 높이는 0.9미터 그리고 풍량은 $4.81\;m^3/min/m^3$이었으며 그 결과는 다음과 같다. 건조시험기간중 외기의 온도는 평균 $10.5^{\circ}C$, 상대습도는 평균 58%이었다. 연속자연통풍 288시간후의 시료벼의 수분함량은 $15{\pm}0.3%$로서, 상하층의 수분함량차이는 약 0.5%이었다. 그리고 평균 건조 속도는 시간당 0.03%이었으며 전기소요량은 1kg의 수분제거량당 0.38KWh이었다. 본시험결과, 상온자연통풍에 의한 in-bin건조방법으로, 생탈곡된 고수분의 벼를 건조할 수 있는 것으로 분석되었다.

  • PDF

DNA 다형(多型)에 있어서 진도견(珍島犬)과 잡종견(雜種犬)과의 비교(比較) (Polymorphism of mitochondrial DNA in Jindo dogs and Japanese mongrels dogs)

  • 한방근;김주헌;강주원;이케모토 시게노리
    • 대한수의학회지
    • /
    • 제33권1호
    • /
    • pp.43-51
    • /
    • 1993
  • Mitochondrial DNA(mt DNA) of Mammalian is the circular one which the 16.5K base pairs and show the maternal inheritance. Evolutional speed of nucleotide sequence is very fast. So that polymorphic analysis of mt DNA provide the useful informations to investigate the genetic relations of interspecies. Authors trials were focussed to compare with the polymorphic differences of mitochondrial DNA between Jindo and Japanese mongrel dogs. DNA was extracted from bloods of 21 head of Jindo dogs and 20 head of Japanese dogs and isolated using 10 kinds of restriction endonucleases(Apa I, BamH I, Bgl II, EcoR I, EcoR V, Hinc II. Hind III, Pst I, Sty I, Xba I) and then separated by the agarose gel electrophoresis. After sourthern blotting hybridization was completed using the mtDNA of Japanese mongrel dogs as a probe. Autoradiography was used to compare the polymorphism of mtDNA both dogs. The results obtained were as follows; 1. mt DNA of Jindo dog showed polymorphism resulting cleavage with four kinds of restriction endonuclease, Apa I, EcoR V, Hinc II, Sty I. While in the Japanese mongrel dogs observed the polymorphism in the five kinds of restriction endonuclease supplemented with EcoR I. 2. Compared with both dogs the frequency differences of DNA polymorphism were recognized in the specific restriction endonuclease Apa I. Consequently in the restriction endonuclease Apa I both dogs classified with three types as A, B, C however in the Jindo dogs frequency of C type was 71.5 percent but in Japanese mongrel dogs observed 45 percent in the A type. 3. DNA polymorphism obtained from the use of five kinds of restriction endonuclease were classified with seven types. In Jindo dogs frequency was highest in the type 6 as 71.4 percent but in the Japanese mongrel dogs showed 35 percent in the type 5. 4. Genetic distances calculated by NEI method showed 0.0089 in Jindo dogs and was 0.0094 in the Japanese mongrel dogs.

  • PDF

제초제 quizalofop-ethyl 분석법에 관한 연구 (Study on analysis method of herbicide quizalofop-ethyl)

  • 김희권;김병호;심재한;서용택
    • 한국환경농학회지
    • /
    • 제17권1호
    • /
    • pp.22-25
    • /
    • 1998
  • 종래에 사용해 오던 HPLC에 의한 quizalofop-ethyl의 분석법을 개선시키고, 또한 ELISA와 GLC를 이용한 새로운 quizalofop-ethyl분석법을 개발하고자 시험을 수행한 결과는 다음과 같다. ELISA 실험에서 적정배양온도는 $37^{\circ}C$였으며 배양시간은 4시간이었다. Coating antigen의 적정수준은 $20{\mu}l/ml$이며 검출 한계는 5ppb이고 회수율은 95%이상이었다. 또 GLC와 HPLC에 의한 검출한계는 5ppb, 100ppb였으며, 토양에서의 회수율은 95.4, 89.5% 이상으로 나타났다. 이상에서 보는 바와 같이 ELISA와 GLC에 의한 quizalofop-ethyl분석법이 HPLC에 의한 것보다 양호한 것으로 나타났다.

  • PDF

시험시공을 통한 플라이애쉬 콘크리트 포장 적용 특성 (Application of Fly Ash Concrete in the Pavement)

  • 홍승호;이병덕;한승환
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.701-704
    • /
    • 2008
  • 국내 일부 고속도로 시멘트 콘크리트포장에서 알칼리-실리카 반응에 의한 피해 사례가 학계에 보고되었다. 미국에서는 CaO 함량이 10% 이하인 플라이애시를 일정량 이상 콘크리트에 적용할 때 알칼리-골재 반응에 의한 팽창 현상을 억제하는 것으로 보고되고 있다. 국내산 플라이애시 대부분은 CaO 함량이 10% 이하로서 미국 ASTM 기준의 F 급에 해당되는 것으로 조사되었다. ASTM C 1260 시험에서 14일에 0.17%의 팽창이 발생하여 잠재적인 알칼리-골재 반응성이 있는 것으로 조사된 구간에 대하여 시멘트 80%와 플라이애시 20%가 혼합된 콘크리트 포장 시험시공을 실시하였다. 시험시공 구간에 적용된 플라이애시 콘크리트에 대하여 재령별 강도시험, 동결-융해 시험을 통하여 내구 특성을 분석하였고 추적조사를 통한 공용 상태를 분석하였다. 일반 콘크리트와 비교하여 플라이애시 콘크리트의 휨강도는 재령 경과에 따라 약간 낮은 강도를 발현하는 것을 알 수 있었다. 플라이 애시는 콘크리트 강도 발현이 지속적으로 발전하여 90일 재령에서는 일반 콘크리트에 96% 나타났다. 본 시험시공 구간에 적용된 플라이애시 콘크리트는 재령에 따라 휨강도가 증진되었고, 동결-융해 특성이 우수한 것으로 나타났다. 본 시험시공 결과 분석을 통하여 플라이애시 콘크리트 포장의 현장 적용성을 확인하였다.

  • PDF

도시지역 의료요구와 의료이용에 미친 제요인 분석 (Factors Affecting the Need for and Utilization of Medical Care In Urban Areas)

  • 송건용;김홍숙
    • 한국인구학
    • /
    • 제5권1호
    • /
    • pp.167-186
    • /
    • 1982
  • Financial barrier is well known as a determinant of the perceived need for and utilization of medical care in urban areas. This study aims to; a) estimate the levels of the perceived need for and utilization of medical care, b) analyze the reasons for not receiving medical care, and c) determine factors affecting the levels of need and utilization, and major reasons for not receiving medical care. The data of household interview survey in urban areas collected for a National Survey on Reorganization of Nationwide Health Care Delivery Network is used. An interview was conducted with a total of 2, 538 households in urban areas during a 28 day period of October through November, 1981, giving an overall response rate of 99 percent. The results show a factor of third-party payer is most influential to utilization (physician visits by patient), and living standard is a determinant to explain the variance of major reasons for not receiving medical care. Therefore, financial burden is still a major determent in utilization of medical care in urban areas. Improved level of living standard and expanded coverage of the third-party payer such as health insurance and public medical assistance will increase both an overall levels of utilization of and the need for medical care in urban areas in the future. The major statistics are as follows; a) rate of the need for medical care during a 15 day period per 100 persons was 33 percent: the differential rates appeared in sex, age, living standard, and third- party payer variables, b) percent of treatment employed per 100 persons who are wanting medical care was 82: the percents were high in young ages, high levels of living standard and education, and persons covered by third-party payer, and c) economic reasons for not receiving medical care per 100 persons who are wanting medical care were occupied with 60 percent: the rates are high in old ages, low levels of living standard and persons not covered by third-party payer.

  • PDF

절수의 시기 및 방법의 차이가 수도의 생육수량과 기타 실용형질에 미치는 영향

  • 이창구
    • 기술사
    • /
    • 제1권1호
    • /
    • pp.18-25
    • /
    • 1968
  • Higher yield in rice paddies is greatly dependent on adequately balanced and timely supply of water. A majority of rice paddy in Korea is generally irrigated by rainfall, but in many cases it has to be supplemented by artificial irrigation for optimum rice culture. Although the water requirement of rice plant is for higher Than that of athec crops, submerged condition of rice paddy is not Necessarily required. The moisture requirement of rice plant varies with its growing stages, and it is possible to increase the irrigation efficiency through reduction of water loss due to percolation in rice paddies. An experimental plots were set up by means of sandomized block design with three duplication; (a) All time submerged, (b) Economically controlled, and (c) Extremely controlled. Three different irrigation periods Were (a) Initial sage, (b) Inter-stage, and (c) Yast stage. The topsoil of the three plots were excavated to the depth of 30 cm and then compacted with clay of 6 cm thickness. There after, they were piled up with the excavated top soils, leveled and cored with clay of 6 cm thickness around footpath in order to prevent leakage. The results obtained from the experiments are as follows, 1. There is no difference among the three experiments plots in terms of physical and chemical conditions, soil properties, and other characteristics. 2. Culm length and ear length are not affected by different irrigation methods. 3. There is no difference in the mature rate and 1, 000 grain weight of rice for the three plots. 4. The control plot which was irrigated every three days shows an increased yield over the all the time submerged plot by 17.8 percent. 5. The clay lined plot whose water holding capacity was held 5 days long, needs only to be irrigated every 7 days. 6. The clay lined plot shows an increased yield over the untreated plot ; over all-the-time submerged plot by 18 percent ; extremely controlled plot by 18 percent, and economically controlled plot by 33 percent. 7. It may be saved in water requirement about one Thirds.

  • PDF