• Title/Summary/Keyword: peracetic acid

Search Result 28, Processing Time 0.028 seconds

EFFECT OF ALKALINE HYDROGEN PEROXIDE AND PERACETIC ACID ON IN SACCO RUMINAL DIGESTIBILITY OF ASPEN SAWDUST

  • Myung, K.H.;Kennelly, J.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.5 no.4
    • /
    • pp.635-641
    • /
    • 1992
  • The influence of alkaline hydrogen peroxide (AHP) and peracetic acid treatment on in sacco digestion of aspen was evaluated in three non-lactating ruminally cannulated Holstein cows fed a diet containing 90% forage and 10% concentrate on a DM basis. AHP treatment decreased lignin concentration by 40 to 60% resulting in increased concentrations of neutral detergent fiber (NDF), acid detergent fiber (ADF) and cellulose. Lignin concentrations in peracetic acid treated samples were less than 10% of values for control samples. In sacco disappearance rates of aspen DM, NDF, ADF and cellulose increased (p<.05) with AHP and peracetic acid treatment. Effective degradability of DM, NDF, ADF and cellulose were determined at a ruminal outflow rate of $.05h^{-1}$. Effective degradabilities of AHP treated aspen were approximately three-fold greater and peracetic acid treated samples five-fold greater than untreated control samples. For all parameters measured, peracetic acid treatment resulted in higher (p<.05) digestion coefficients than AHP treated aspen. Results demonstrate that peracetic acid or AHP treatment can enhance the nutritive value of aspen sawdust for ruminants to a level comparable to that reported for many forages.

Structural Analysis of Open-Column Fractionation of Peracetic Acid-Treated Kraft Lignin

  • PARK, Se-Yeong;CHOI, June-Ho;CHO, Seong-Min;CHOI, Joon Weon;CHOI, In-Gyu
    • Journal of the Korean Wood Science and Technology
    • /
    • v.48 no.6
    • /
    • pp.769-779
    • /
    • 2020
  • This study investigates the selective fractionation of lignin with uniform structures and lower molecular weight. Lignin solubilization was first performed using a solution of acetic acid (AA) and hydrogen peroxide (HP) (4:1, (v/v)) to form peracetic acid (PAA), which is a strong oxidant. After the PAA-induced solubilization that occurred at 80℃, totally soluble lignin was extracted by ethyl acetate (EA) and divided into organic- and water-soluble fractions. The EA fraction was then fractionated by open-column using three solutions (chloroform-ethyl acetate, methanol, and water) sequentially. With an increase in the solvent polarity during the fractionation step, the molecular weight of the lignin-derived compounds in the fraction increased. Remarkably, some lignin fractions did not have aromatic structures. These fractions were identified as carboxylic acid-containing polymers like poly-carboxylates. These results conclude that the selective production of lignin-derived polymers with specific molecular weight and structural characteristics could be possible through open-column fractionation.

Efficacy of Disinfectants against Health-Associated Multi-drug Resistant Clinical Isolates

  • An, Jeong-Lib;Kim, Sang-Ha;Yu, Young-Bin;Kim, Sunghyun;Lee, Moo-Sik;Kim, Young-Kwon
    • Biomedical Science Letters
    • /
    • v.27 no.4
    • /
    • pp.264-269
    • /
    • 2021
  • The purpose of this study was to evaluate the disinfecting efficacy of peracetic acid (PAA), sodium hypochlorite (NaOCl) and phenol, which are representative disinfectants in medical environments using four types of multi-drug resistance (MDR) clinical isolates with healthcare-associated infections (HAI). 26 antibiotic susceptibility tests were conducted for the four types of MDR clinical isolates in the same way as for clinical specimens. The minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) of the disinfectants were determined by using in vitro liquid medium dilution method and inoculation of the plate medium. Both the MIC and MBC of phenol against MRSA and VRE were 3.1%, while those against KPC and MRPA were 6.2%. The MIC and MBC of peracetic acid (PAA) against MRSA, VRE, KPC, and MRPA were 0.18%. The MIC and MBC of sodium hypochlorite (NaOCl) against MRSA were 0.39% and 0.78%, respectively. Both values of MIC and MBC were 0.78% for VRE. In addition, KPC and MRPA showed 0.39% for MIC and 0.78% for MBC. For all MDR strains used in this study, sodium hypochlorite and peracetic acid showed significant sterilizing efficiency, while no clear correlation was identified between antibiotic resistance clinical isolated and ability of disinfection.

Ultraviolet-activated peracetic acid treatment-enhanced Arabidopsis defense against Pseudomonas syringae pv. tomato DC3000

  • Min Cho;Se-Ri Kim;Injun Hwang;Kangmin Kim
    • Journal of Plant Biotechnology
    • /
    • v.50
    • /
    • pp.215-224
    • /
    • 2023
  • Disinfecting water containing pathogenic microbes is crucial to the food safety of fresh green agricultural products. The UV-activated peracetic acid (UV/PAA) treatment process is an efficient advanced oxidation process (AOP) and a versatile approach to disinfecting waterborne pathogens. However, its effects on plant growth remain largely unknown. This study found that low-dose UV/PAA treatment induced moderate oxidative stress but enhanced the innate immunity of Arabidopsis against Pseudomonas syringae pv. (Pst) DC3000. When applied as water sources, 5- and 10-ppm UV/PAA treatments slightly reduced biomass and root elongation in Arabidopsis seedlings grown under hydroponic conditions. Meanwhile, treatments of the same doses enhanced defense against Pst DC3000 infection in leaves. Accumulation of hydrogen peroxide and callose increased in UV/PAA-treated Arabidopsis samples, and during the post-infection period, UV/PAA-treated seedlings maintained vegetative growth, whereas untreated seedlings showed severe growth retardation. Regarding molecular aspects, priming-related defense marker genes were rapidly and markedly upregulated in UV/PAA-treated Arabidopsis samples. Conclusively, UV/PAA treatment is an efficient AOP for disinfecting water and protecting plants against secondary pathogenic attacks.

의약품 제조시설의 포름알데히드가스 훈증살균과 최근 실내무균화방법의 동향

  • 한국공기청정협회
    • Air Cleaning Technology
    • /
    • v.23 no.3
    • /
    • pp.34-43
    • /
    • 2010
  • In most productive facility of pharmaceutical companies, the fumigation using formaldehyde gas has been put into operation. Because formaldehyde gas is so bactericidal as to sterilize bacterial spore which can not be sterilized with usual disinfectants, it has been used for fumigation in many facilities such as facility of experimental animals, research institute and productive facility of pharmaceutical companies which are required to be high level of biological clean. However, the use of formaldehyde is recently under the strict management because of its causing of sick house and carcinogenesis. We introduce the conditions of sterilization using formaldehyde gas, the examples of sterilization using formaldehyde gas in a pharmaceutical manufacture and the problems of use of formaldehyde against environments and health. Further, we describe the characteristics and future subjects of the sterilization method using gasified oxidants such as hydrogen peroxide, peracetic acid and chlorine oxide.

  • PDF

Peracetic Acid Treatment as an Effective Method to Protect Wood Discoloration by UV Light

  • PARK, Kyoung-Chan;KIM, Byeongho;PARK, Hanna;PARK, Se-Yeong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.50 no.4
    • /
    • pp.283-298
    • /
    • 2022
  • Wood has always been used for various day-to-day applications such as interior or exterior construction materials, and household products. However, it can undergo photodegradation and discoloration by environmental factors including ultraviolet (UV) light, and thus has shortened its service life. Bleaching or delignification of wood surfaces is a suitable solution to stabilize wood against weathering by UV because these techniques can alter or remove the chromophores in lignin, which is a main factor of wood discoloration. To improve the color stability of wood surface according to the lifespan, surface delignification was conducted using peracetic acid (PAA) and hydrogen peroxide (HP) on the woods of Larix kaempferi and Quercus mongolica. After the PAA treatment, L* increased considerably from 60-70 to 90-95. Furthermore, wood surface color did not change significantly after UV exposure. The color differences (𝜟E*) between before and after PPA treatment of wood showed the 4.8-12.2 of L. kaempferi, and 1.7-3.7 of Q. mongolica, respectively. The lignin-related peaks in Fourier transform infrared spectroscopy (FT-IR) spectra disappeared with increased duration of PAA treatment. These results confirmed that the lignin component was partially or completely removed after the PAA treatment; the color differences (𝜟E*) clearly showed that there was a reduction in redness (a*) and yellowness (b*), and an increase in lightness (L*) owing to the removal of lignin. Based on these results, this study demonstrated that the partial removal of lignin from wood surfaces is a fundamental method for resolving photo-degradation.

Synthesis of Polyurethane Foam with Soybean Oil (콩기름을 이용한 폴리우레탄 포옴의 합성)

  • Yang, Do Hyeon;Lee, Kwang Young;Shin, Jae Sup
    • Applied Chemistry for Engineering
    • /
    • v.10 no.5
    • /
    • pp.731-736
    • /
    • 1999
  • The polyol was synthesized from soybean oil. Soybean oil was epoxized with peracetic acid, and was reacted with methanol in a sulfuric acid catalyst. OH value of synthesized polyol was 186(mg KOH/g). The polyurethane foam was synthesized with silicon type B-8409 as a surfactant, distilled water as a blowing agent, dimethylcyclohexylamine as a catalyst, and polymeric MDI. The density, the compressive strength, the compressive modulus, and the cell structure of the synthesized foam were investigated. The foam was prepared with changing the mole ratio of MDI, and the amount of water, surfactant, and catalyst. As the MDI index was increased, the density and the compressive property of the foam were increased.

  • PDF

Monitoring and Characterization of Bacterial Contamination in a High-Purity Water System Used for Semiconductor Manufacturing

  • Kim, In -Seop;Lee, Geon-Hyoung;Lee, Kye-Joon
    • Journal of Microbiology
    • /
    • v.38 no.2
    • /
    • pp.99-104
    • /
    • 2000
  • Hydrogen peroxide has been used in cleaning the piping of an advanced high-purity water system that supplies ultra-high purity water (UHPW) for 16 megabyte DRAM semiconductor manufacturing. The level of hydrogen peroxide-resistant bacteria in UHPW water was monitored prior to and after disinfecting the piping with hydrogen peroxide. Most of the bacteria isolated after hydrogen peroxide disinfection were highly resistant to hydrogen peroxide. However, the percentage of resistant bacteria decreased with time. The hydrogen peroxide-resistant bacteria were identified as Micrococcus luteus, Bacillus cereus, Alcaligenes latus, Xanthomonas sp. and Flavobacterium indologenes. The susceptibility of the bacteria to hydrogen peroxide was tested as either planktonic cells or attached cells on glass. Attached bacteria as the biofilm on glass exhibited increased hydrogen peroxide resistnace, with the resistance increasing with respect to the age of the biofilm regrowth on piping after hydrogen peroxide treatment. In order to optimize the cleaning strategy for piping of the high-purity water system, the disinfecting effect of hydrogen preoxide and peracetic acid on the bacteria was evaluated. The combined use of hydrogen peroxide and peracetic acid was very effective in killing attached bacteria as well as planktonic bacteria.

  • PDF

Studies on the Hydrolysis of Holocellulose with Trichoderma viride Cellulase - (I) Effect of the treated substrate - (Cellulase에 의(依)한 목재당화(木材糖化)에 관(關)한 연구(硏究) - (I) 기질(基質) 처리(處理)의 효과(効果) -)

  • Cheong, Tae-Seong;Min, Du-Sik
    • Journal of Korean Society of Forest Science
    • /
    • v.38 no.1
    • /
    • pp.13-18
    • /
    • 1978
  • In this study, enzymatic hydrolysis of the holocellulose from Alnus hirsuta (Spach) Rupr. (8-14 yr's) was investigated using crude cellulase preparations of Trichoderma viride Pers. ex. Fr. SANK 16374. And conducted on the optimum condition of the treated substrate for saccharification. A strain of Trichoderma viride Pers. ex. Fr. SANK 16374 was found to be highly efficient for the cellulase productivity, especially in the submerged culture process. The culture medium used in this experiment was prepared from an extract of wheat bran consisting also of $KH_2PO_410$, $(NH_4)_2$ $SO_4$ 3, $NaNO_3$ 3, and $MgSO_4$ $7H_2O$ 0.5g/l. Cellulose powder (Toyo filter paper, 60 mesh) was found to be an importent factar for inducing the cellulase formation. And the cellulase produced in the culture fluid was salted out quantitatively by the use of ammonium sulfate (Fig. 1) Reducing sugar was determined by the Dinitrosalicylic acid (DNS) method, using reagents prepared according to the method of Sumner (1925). The results obtained were summerized as follows; 1. The method of delignification were treated by the Peracetic acid (PA) method, according to the method of Toyama (1970). The yield of holocellulose were decreased in accordance with increasing concentration of Peracetic acid solution; delignification of Alnus hirsuta Rupr. with 20% Peracetic acid was satisfied for 48 hours and 40%~60% peracetic acid was satisfied for 24 hrs: 2. The substrate (holocellulose) was changed easely into fine powder with enzymatic hydrolysis and cellulase exhibits optimum activity on the reducing sugar formation from substrate at the range of 60-100 mesh. 3. The reducing sugar formation increased in accordance with increasing dry temperature on holocellulose substrate was found to be $190{\pm}5^{\circ}C$. 4. The optimal heat treated time of holocellulose substrate was found to be 45 min. for the reducing sugar formation showed the best products. The reducing sugar formation did not show statisticaly significent diflerences at 5% levels by heat treated time for 45 min. and 60 min.

  • PDF

Microbial Conversion of Woody Waste into Sugars and Feedstuff (I) - Optimal Delignification condition with alkaline peroxide for enzymatic hydrolysis of poplar wood (미생물(微生物)에 의한 목질자원(木質資源)의 당화(糖化) 및 사료화(飼料化)에 관(關)한 연구(硏究) (I) - alkaline peroxide에 의한 현사시나무의 효소가수분해를 위한 탈리그닌화의 적정조건)

  • Kim, Yoon-Soo;Bang, Joo-Wan;Chung, Ki-Chul;Myung, Kyu-Ho;Kim, Youn-Sik
    • Journal of the Korean Wood Science and Technology
    • /
    • v.14 no.3
    • /
    • pp.23-29
    • /
    • 1986
  • Alakline peroxide pretreatment for the delignification of poplar wood was performed. sinceit is a simple and efficent method for enhancing the enzymatic digestibility of wood residues. Approximately one-half of their lignin and most of the hemicellulose present in poplar wood were removed when the wood sawdust was reacted at 25$^{\circ}C$ for 100 hrs in an alkaline solution (pH 11.5) of 1% peroxide. The rate of decomposition as well as the saccharification efficiency were enhanced up to 350% and 260% respectively in comparision with those of the controll. This enhancement is comparable with that pretreated with 1% sodium hydroxide and 20% peracetic acid successively. The advantages of alkaline peroxide as delignifying agents against other chemicals were also discussed.

  • PDF