• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.852-858
• /
• 2012

This paper describes evaluation results of the wind power penetration limit (WPPL) and the wind energy penetration (WEP) in the Mongolian central power system (MCPS). A wind power plant (WPP) in a power system possesses an output power limit because the power system must maintain a balance between the generation and consumption of electricity at all times in order to achieve an adequate level of quality. The instantaneous penetration limit (IPL) of wind generation at a load is determined as the minimum of the three technical constraints: the minimum output, the ramp rate capability, and the spinning reserve of the conventional generating units. In this paper, a WPPL is defined as the maximum IPL divided by the peak load. A maximal variation rate (VR) of wind power is a major factor in determining the IPL, WPPL, and WEP. This paper analyzes the effects of the maximal VR of wind power on the WPPL, WEP, and capacity factor (CF) in the MCPS. The results indicate that a small VR can facilitate a large amount of wind energy while maintaining a high CF with increased wind power penetration.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.10-17
• /
• 2014

The Jeju Special Self-Government Provincial Government has made the plan penetrating gradually electric vehicles(EVs) in the Jeju Special Self-Government Province(Jejudo). However the effects of EVs penetration on the electrical grid of the Jejudo is not reported. In this paper the yearly electric energy consumed by the EVs was calculated and the effects of the EV penetration on the peak power of the grid were analyzed in the Jejudo for the future 10 years, and we hope that our study results will help the governors realize the EVs penetration plan in the Jejudo. The calculation results show that the rate of the electric energy used by the EVs will become to 2.9% at its maximum at the 2017 year when the penetration rate of EVs in passenger cars becomes 10%, and the rate of the electric energy consumed by the EVs will become to 9.4% at its maximum at the 2020 year when the penetration rate of EVs in passenger cars becomes 30%. The concepts of smart-charging capacity and 100%-valley-filling charging capacity of the grid were defined and calculated for the Jeju Grid, and the grid was analyzed to have the sufficient EV charging capacity until the 2022 year.

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.705-711
• /
• 2012

The purpose of this study is to develop the model to estimate the penetration rate of metal under a high power continuous wave laser irradiation. To estimate it, an empirical modeling is more practical when the penetration phenomena of metal by laser irradiation is too complex to be analyzed by the numerical simulation. When several methods published earlier were applied to our results, we found out that their methods were not appropriate as the model. Therefore, we suggested the new empirical method considering effective intensity as a key variable. As a result, we confirmed that the new method was effective to model the penetration rate of SUS304 metal and expected that it could be available to other metals.

• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.82-88
• /
• 2015

Objectives: This study is designed to analyze the penetration performance into ceiling materials containing asbestos of scattering prevention agents and investigate the change in penetration depth and viscosity according to the dilution rate of anti-scattering agents diluted with distilled water. Methods: Five different types of scattering prevention agents were spread on plate-type asbestos ceiling materials. The penetration depth of each coated ceiling material was measured by energy dispersive spectroscopy (EDS) analysis, based on X-ray fluorescence (XRF) results of the non-coated ceiling materials. Test equipment installed the ceiling materials and 60 minutes were collected at a flow rate of $10{\ell}/min$ at a filter of 25 mm. Results: An EDS analysis of the cross-section of ceiling materials constructed with a scattering prevention agent revealed that potassium is detected in the process of penetrating hardener solidification and this element could be an indicator for infiltration. When anti-scattering agents with different viscosities were constructed and the penetration depth was analyzed by potassium detection assessment using EDS, the depth results with viscosities of 5.0, 2.5, and 1.9 cP were 98.5, 103, and $147{\mu}m$, respectively. Penetration performance improved with decrease in viscosity. Conclusions: For asbestos ceiling materials, it is concluded that a higher dilution rate of the scattering prevention agent leads to lower viscosity, and hence a deeper penetration depth from $156{\mu}m$ to 3 mm. The asbestos anti-scattering properties according to the penetration depth will be confirmed through further study.

• Clinical and Experimental Reproductive Medicine
• /
• 제19권2호
• /
• pp.153-162
• /
• 1992

To solve the logistical problems of the sperm penetration assay (SPA) to provide just a sufficient number of hamster ova exactly when they are needed, a new method to cryopreserve the ova has been devised (1-step dehydration and 2-step thawing). After freezing & thawing of zona-intact (ZI) and zona-free (ZF) hamster ova according to this new method, the frozen-thawed ova were compared with fresh, control ova (FO) in terms of the degree of sperm penetration in SPA using semen samples from fertile donors, subfertile, and infertile male. Each sperm sample was capacitated for 42 hours inTEST-Yolk Buffer before insemination in SPA. In fertile doner, both the penetration rate and penetration index were lower in SPA using frozen ova (ZI; 92.4%, 6.2, ZF; 63.7%, 3.9) than those of SPA using fresh ova (99.3%, 8.4). There was a significant correlation between the penetration index of SPA using FO and ZI (p<0.001), and between those of SPA using FO and ZF and ova (p<0.001). In subfertile patient, both the penetration rate and penetration index were lowered in frozen ova (ZI; 62.3%, 1.3, ZF; 21.8%, 0.4) than those of fresh ova (74.8%, 1.8). There were significant correlation between the penetration rate and penetration index in ZI ova (p<0.05 and p<0.001, respectively). In infertile patient, both the penetration rate and penetration index were ZI; 3.1%, 0.0, ZF;0.0%, 0.0, respectively. There were significant correlation between the penetration rate and penetration index in ZI ova (p<0.05).

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.470-474
• /
• 2008

본 연구에서는 실제 현장에서 수행한 피에조콘관입 및 소산시험결과와 변형률 속도를 고려한 구성모델의 이론적 해석을 비교하였다. 이를 위하여 변형률 속도 의존적 구성모델의 수학적 유도과정을 전개하였다. 해석 결과 변형률속도를 무시한 구성모델보다 변형률속도-의존 구성모델을 활용한 지반의 거동 해석이 비의존적 구성모델인 경우의 해석 보다 현장의 시험결과와 잘 일치하므로 변형률속도-의존 구성모델의 적용이 바람직하다.

• Journal of Pharmaceutical Investigation
• /
• 제36권6호
• /
• pp.401-403
• /
• 2006

Topical preparations such as cream for Acyclovir(ACV), a potent anti-viral agent for the treatment of herpes simplex and herpes zoster, have been marketed in the world since 1993. However, the skin penetration rate of ACV from generic cream formulations sold in Europe has been found to be lower than the original $Zovirax^{\circledR}$ cream. In this study, we formulated ACV into a novel organogel system and compared the skin penetration characteristics with $Zovirax^{\circledR}$ cream. The rate and amount of skin penetration of ACV from the organogels were 6.3-fold greater than those obtained with $Zovirax^{\circledR}$ at an ACV concentration of 5%. The solubilizing effect of oil phase and anti-nucleation effect exhibited by sodium alginate contained in water phase are most likely attributed to enhanced ACV skin penetration property.

• 한국인쇄학회지
• /
• 제24권1호
• /
• pp.67-76
• /
• 2006

Measuring ink penetration is one of the best ways to know paper printability. Ink penetration was effected by physical properties of newspapers. This study was carried out for the purpose of improvement printability with ink penetration of Korean newspapers. The samples were prepared by means of 7 Newspaper manufacture company in Korea, and were tested by IGT printability tester. The results of this experiments showed that the rate of ink penetration, roughness and porosity are proportioned. While, ink penetration, paper formation, ash content and smoothness of paper are in inverse proportioned.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.951-951
• /
• 2005

The characteristics of Boussinesq starting forced plumes were investigated in this study. Two distinct periods in the transient plume penetration were identified, namely the Period of Flow Development (PFD) and Period of Developed Flow (PDF). PFD refers to the time period whereby the penetration rate is governed by the complex vortex dynamics initiated by the exit conditions that can include vortex coalescence, vortex leapfrogging, pinching off of the head vortex from the trailing stem and the eventual reconnection. The pinch-off and reconnection leads to an overshoot of the plume front which is a common observation reported in previous studies. The penetration rate in PDF is more predictable and depends on the continuous feeding of buoyancy and momentum into the head vortex by the trailing buoyant-jet stem. Similarity solutions are developed for PDF to describe the temporal variation of the penetration rate, by incorporating the behavior of an isolated buoyant vortex ring and recent laboratory results on the trailing buoyant jet. In particular, the variations of velocity ratios between the head vortex and trailing buoyant jet are analytically computed. To verify the similarity solutions, experiments were conducted on vertical starting forced plumes using planar laser induced fluorescence (PLIF).

• Journal of Welding and Joining
• /
• 제22권1호
• /
• pp.71-76
• /
• 2004

In the standpoint of the arc pressure, the effects of the filler wire feed rate on the penetration was investigated in this study. The pure Ar gas was used as a shield gas and the parameters investigated were the welding current and the filler wire feed rate. By making the experiment on the arc pressure, we could know that the arc pressure was fluctuated as the depth-into-arc of the tungsten rod. Instead of the filler wire, the tungsten rod was supplied into the molten pool to make this experiment. Because the filler wire melted in arc and then we couldn't measure the arc pressure. So, the tungsten rod - the highest melting point - was used. According to the depth-into-arc of the tungsten rod, the arc pressure could be measured by using the manometer. It was proved that the arc pressure got higher as the wire feed rate was slow. It is reported the arc pressure is proportion to welding voltage and the square of welding current. But, in the filler wire TIG welding, we could blow that arc pressure was fluctuated as the depth-into-arc of filler wire was changed. We could measure the arc pressure by the variation of the filler wire feed rate and could verify that it affected bead shape and penetration.