• 제목/요약/키워드: penetration height

검색결과 153건 처리시간 0.025초

간척지에 플라스틱 온실 설치 시의 문제점 분석 및 개선방안 (An analysis of problems and countermeasures in the installation of plastic greenhouse on reclaimed lands)

  • 유인호;구양규;조명환;류희룡;문두경
    • 농업과학연구
    • /
    • 제41권4호
    • /
    • pp.473-480
    • /
    • 2014
  • Upon setting up a dedicated plastic greenhouse for tomato cultivation developed by the Rural Development Administration on the Gyehwa reclaimed land, this study was aimed at analyzing the problems can be occurred in the installation of plastic greenhouse on reclaimed lands as well as finding out solutions for improvement. A relatively cheaper wooden pile was used in the installation in order to supplement the soft ground conditions. Based on the results of ground investigation of the installation site, both the allowable bearing capacity and pulling resistance of the wooden pile with a diameter of 150 mm and a length of 10 m were computed and came out to be 30.645 kN. It was determined that the values were enough to withstand the maximum compressive force (17.206 kN) and the pullout force (20.435 kN) that are generally applied to the greenhouse footing. There are three problems aroused in the process of greenhouse installation, and the corresponding countermeasures are as follow. First, due to the slightly bent shape of the wooden pile, there were phenomenon such as deviation, torsion, and fracture when driving the pile. This could be prevented by the use of the backhoe (0.2) rotating tongs, which are holding the pile, to drive the pile while pushing to the direction of the driving and fixing it until 5 m below ground and applying a soft vibrating pressure until the first 2 m. Second, there exists a concrete independent footing between the column of the greenhouse and the wooden pile driven to the underground water level. Since it is difficult to accurately drive the pile on this independent footing, the problem of footing baseplate used to fix the column being off the independent footing was occurred. In order to handle with this matter, the diameter of the independent footing was changed from 200 mm to 300 mm. Last, after films were covered in the condition that the reinforcing frame and bracing are not installed, there was a phenomenon of columns being pushed away by the strong wind to the maximum of $11m{\cdot}s^{-1}$. It is encouraged to avoid constructions in winter, and the film covering jobs always to be done after the frame construction is completely over. The height of the independent footing was measured for 9 months after the completion of the greenhouse installation, and it was found to be within the margin of error meaning that there was no subsidence. The extent to the framework distortion and the value of inclinometers as well showed not much alteration. In other words, the wooden pile was designed to have a sufficient bearing capacity.

Growth and yield responses of rice varieties to various soil water deficit conditions under different soil types

  • Kikuta, Mayumi;Samejima, Hiroaki;Magoti, Rahab;Kimani, John M.;Yamauchi, Akira;Makihara, Daigo
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.322-322
    • /
    • 2017
  • To avoid drought stress under rainfed upland conditions, it is important for rice to efficiently utilize water at shallow soil layers supplied by rainfall, and access to water retained in deer soil layers. The root developmental characteristics of rice, which play important role in the adaptability to drought conditions, vary depending on the variety. Moreover, water availability for plant differs depending on the soil types that have different physical properties such as water holding capacity, permeability, capillary force, penetration resistance, etc. In this study, we evaluated growth and yield responses of rice varieties to various soil water deficit conditions under three different soil types. The experiment was conducted in a plastic greenhouse at the Kenya Agricultural and Livestock Research Organization-Mwea from October 2016 to January 2017. Two upland varieties (NERICA 1 and 4) and one lowland variety (Komboka) were grown in handmade PVC pots (15.2 cm diameter and 85.0 cm height) filled with three different types of soil collected from major rice-growing areas of the country, namely black cotton (BC), red clay (RC), and sandy clay (SC). Three watering methods, 1) supplying water only from the soil surface (W1), 2) supplying water only from the bottom of the pots (W2), and 3) supplying water both from the soil surface and the bottom of pots (W3), were imposed from 40 days after sowing to maturity. Soil water content (SWC) at 20, 40, and 60 cm depths was measured regularly. At the harvesting stage, aboveground and root samples were collected to determine total dry weight (TDW), grain yield, and root length at 0-20, 20-40, 40-60, and 60-80 cm soil layers. Irrespective of the watering methods, the greatest root development was obtained in RC, while that in BC was less than other two soils. In BC, the degree of yield reduction under W1 was less than that in RC and SC, which could be attributed to the higher water holding capacity of BC. In RC, the growth and yield reduction observed in all varieties under W1 was attributed to the severe drought stress. On the other hand, under W2, SWC at the shallow soil depth in RC was maintained because of its higher capillary force compared with BC and SC. As the result, growths and yields in RC were not suppressed under W2. In SC, deep root development was not promoted by W2 irrespective of the varieties, which resulted in significant yield losses. Under W1, the rice growth and yield in SC was decreased although shallow root development was enhanced, and the stomatal conductance was maintained higher than RC. It was suspected that W1 caused nutrients leaching in SC because of its higher permeability. Under rainfed conditions, growth and yield of rice can be strongly affected by soil types because dynamics of soil water conditions change according to soil physical properties.

  • PDF

생장조절체 처리가 원통형 종이포트묘의 도장 억제 및 근권부 발달에 미치는 영향 (Effects of Different Application Approaches with Diniconazole on the Inhibition of Stem Elongation and the Stimulation of Root Development of Cylindrical Paper Pot Seedling)

  • 장동철;수찬;김시홍;김대훈;김재경;허재윤;넉탕부;최기영;김일섭
    • 생물환경조절학회지
    • /
    • 제29권4호
    • /
    • pp.365-372
    • /
    • 2020
  • 본 연구는 원통형 종이포트 토마토 육묘시 Diniconazole의 처리방법이 도장억제 및 근권발달에 미치는 영향을 검토하기 위하여 수행되었다. 그 결과, 엽면적, LAR, 초장, 충실도, 생체중, RGR 및 R/S 에서 시험구간 유의한 차이를 보였다. 동일한 농도를 처리했을 경우, 근권부와 지상부의 흡수도 차이로 인해 저면관수가 엽면살포에 비해 도장억제에 효과적이었다. 저면관수는 엽면시비의 10분의 1의 농도만으로도, 20~30%정도의 동일한 도장억제 효과를 얻을 수 있었다. 디니코나졸 처리에의한 근권부 반응이 흥미로웠는데, 저면관수시 총근장, 근권부피, 평균 근경 및 근단수가 증가하였다. 특히, 0.3mm 이하의 초미세근이 감소하고 0.3~0.6mm의 세근이 증가하였다. 따라서 원통형 종이포트 육묘시 저면관수를 하는 것이 기존 엽면시비에 비해 사용량이 적으면서도 도장억제 및 근권부 활착률을 높힐 수 있을 것으로 판단된다.

일반 강도용 고유동 콘크리트에서의 골재 입도 영향 (Effects of Aggregate Grading on the Performance of High-Flowing Concrete with General Strength)

  • 김상철;김연태;신동철
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제16권6호
    • /
    • pp.63-72
    • /
    • 2012
  • 고유동 콘크리트는 일반 콘크리트에 비해 고가의 각종 혼화재료를 과량 혹은 추가로 사용하여야 하기 때문에 재료비 단가 상승, 추가 설비의 필요 등의 문제점이 있고, 재료분리를 방지하기 위해 분체량을 증가시킴으로써 과잉 강도발현 등 고유동 콘크리트가 갖고 있는 많은 장점이 있음에도 특수 목적이외에는 그 사용에 있어 제약이 있었다. 이에 본 연구에서는 기존에 개발된 고강도성 고유동 콘크리트와 달리 일반 강도의 고유동 콘크리트의 상용화를 위해 콘크리트 구성 재료 중에서 골재를 중심으로 이들의 합리적 활용과 콘크리트의 성능향상 모색을 위해 정량적 인자별 실험을 수행하였다. 사용한 실험변수로 물-시멘트비, 잔골재율, 골재의 조립률, 입자 크기의 중요도, 13mm 골재와 미립분의 활용에 대해 검토하였으며, 슬럼프플로와 U형 충전시험의 충전고차로 평가하였다. 연구결과, 고유동 콘크리트 성상은 굵은 골재보다 잔골재 입도에 대한 의존도가 높으며, 잔골재율이 높을수록, 조립률이 낮을수록 충전성과 유동성 확보에 유리하였다. 또한, 골재의 대체재로써 13mm 골재 및 미립의 석분을 활용함으로써 보다 효율적으로 충전성과 유동성을 향상시킬 수 있음이 본 연구를 통해 확인되었다.

형성층 전기저항을 이용한 조경용 수목 활력도 분석 (Assessment of Landscape Tree Vigor Using Cambial Electrical Resistance)

  • 황동규;김동엽
    • Ecology and Resilient Infrastructure
    • /
    • 제3권4호
    • /
    • pp.302-306
    • /
    • 2016
  • 수목의 활력도는 다양한 방법으로 측정한다. 수목의 형성층 전기저항은 전기생리학적 진단 방법을 이용하여 수목의 활력도를 간접적으로 나타낸다. 본 연구는 Shigometer를 이용하여 몇 가지 수목의 활력도를 측정하고 수종 간 차이를 비교하고자 하였다. 그리고 개엽 시기, 방위, 수피 온도 등 전기저항 값에 영향을 주는 요인들을 파악하고자 하였다. 측정용 탐침의 길이를 일정하게 유지하여 측정오차를 최소화하였다. 대상 수종은 성균관대학교 자연과학캠퍼스에 있는 30-40년생 느티나무, 은행나무, 메타세쿼이아, 잣나무 및 튜울립나무로 하였고 각 종당 3개체를 선정하였다. 측정 시기는 2011년 3월부터 5월까지, 지면으로부터 60 cm와 흉고높이인 1.2 m에서 동서남북 4개 방위 별로 전기저항 값을 측정하였다. 수목 부근의 토양환경과 식물의 스트레스 반응을 함께 측정하였다. 측정 결과를 바탕으로 전기저항과 영향 요인과의 상관관계를 살펴보았다. 개엽 시기 이전인 3월 중순까지는 대체적으로 전기저항 값이 높았으나 4월부터 점차 낮아지기 시작하여 5월 11일에는 가장 낮은 값을 보였다. 전기저항 값의 시기별 변화는 토양수분, 토양전도도, 토양온도, 수목의 스트레스 반응과 비슷한 경향을 보였다. 잣나무의 경우 겨울에도 잎이 떨어지지 않아 측정 기간 동안 전기저항 값의 변화는 크기 않았다. 느티나무, 은행나무 및 메타세쿼이아는 남쪽 방향의 수피 온도가 다른 방위에 비하여 높았으며 전기저항 값은 가장 낮았다. Shigometer는 수목의 활력도를 현장에서 간단하게 측정함으로써 수목 관리에 유용하게 이용할 수 있을 것으로 생각된다.

천공형 티타늄막을 이용한 골유도재생술 시 수종의 골이식재가 골재생에 미치는 영향 (Effect of bone graft materials on bone formation in guided bone regeneration using perforated titanium membrane)

  • 홍승범;권영혁;박준봉;허익;정종혁
    • Journal of Periodontal and Implant Science
    • /
    • 제36권1호
    • /
    • pp.223-237
    • /
    • 2006
  • The purpose of the present study was to evaluate the effect of bone graft materials including deproteinized bovine bone(DBB), demineralized freeze-dried bone(DFDB), freeze-dried bone(FDB) on bone formation in guided bone regeneration using perforated titanium membrane(TM). 16 adult male rabbits(mean BW 2kg) were used in this study and 4 rabbits allotted to each test group. Intramarrow penetration(diameter 6.5mm) was done with round carbide bur on calvaria to promote blood supply and clot formation in the wound area. The test groups were devided into 4 groups as follows: TM only(test 1), TM +DBB(test 2), TM +DFDB(test 3), TM +FDB(test 4). Perforated titanium membrane was contoured in rectangular parallelepiped shape(0.5mm pore diameter, 10mm in one side, 2mm in inner height), filled the each graft material and placed on the decorticated carvaria. Perforated titanium membrane was fixed with resorbable suture materials. The animals were sacrificed at 2, 8 weeks after the surgery. Non-decalcified preparations were routinely processed for histologic analysis. The results of this study were as follows: 1. Perforated titanium membrane was biocompatible. 2. Perforated titanium membrane had capability of maintaining the space during the healing period but invasion of soft tissue through the perforations of titanium membrane decreased the space available for bone formation. 3. In test 1 group without bone graft material, the amount of bone formation and bone maturation was better than other test groups. 4. Among the graft materials, the effect of freeze-dried bone on bone formation was best. 5. In the test groups using deproteinized bovine bone, demineralized freeze-dried bone, bone formation was a little. The spacemaking capability of the membrane may be crucial for bone formation. The combined treatment with the perforated titanium membrane and deproteinized bovine bone or demineralized freeze-dried bone failed to demonstrate any added effect in the bone formation. Minimization of size and numbers of perforations of titanium membrane or use of occlusive titanium membrane might be effective to acquire predictable results in the vertical bone formation.

Damage and vibrations of nuclear power plant buildings subjected to aircraft crash part I: Model test

  • Li, Z.R.;Li, Z.C.;Dong, Z.F.;Huang, T.;Lu, Y.G.;Rong, J.L.;Wu, H.
    • Nuclear Engineering and Technology
    • /
    • 제53권9호
    • /
    • pp.3068-3084
    • /
    • 2021
  • Investigations of large commercial aircraft impact effect on nuclear power plant (NPP) buildings have been drawing extensive attentions, particularly after the 9/11 event, and this paper aims to experimentally assess the damage and vibrations of NPP buildings subjected to aircraft crash. In present Part I, two shots of reduce-scaled model test of aircraft impacting on NPP building were carried out. Firstly, the 1:15 aircraft model (weighs 135 kg) and RC NPP model (weighs about 70 t) are designed and prepared. Then, based on the large rocket sled loading test platform, the aircraft models were accelerated to impact perpendicularly on the two sides of NPP model, i.e., containment and auxiliary buildings, with a velocity of about 170 m/s. The strain-time histories of rebars within the impact area and acceleration-time histories of each floor of NPP model are derived from the pre-arranged twenty-one strain gauges and twenty tri-axial accelerometers, and the whole impact processes were recorded by three high-speed cameras. The local penetration and perforation failure modes occurred respectively in the collision scenarios of containment and auxiliary buildings, and some suggestions for the NPP design are given. The maximum acceleration in the 1:15 scaled tests is 1785.73 g, and thus the corresponding maximum resultant acceleration in a prototype impact might be about 119 g, which poses a potential threat to the nuclear equipment. Furthermore, it was found that the nonlinear decrease of vibrations along the height was well reflected by the variations of both the maximum resultant vibrations and Cumulative Absolute Velocity (CAV). The present experimental work on the damage and dynamic responses of NPP structure under aircraft impact is firstly presented, which could provide a benchmark basis for further safety assessments of prototype NPP structure as well as inner systems and components against aircraft crash.

감압정에 의한 필 댐 및 제방 기초지반의 간극수압 저감효과 수치해석 (Numerical Analysis on Pore Water Pressure Reduction at Embankment Foundation of Fill Dam and Levee by Relief Well)

  • 장재훈;유찬호;백승철
    • 한국지반환경공학회 논문집
    • /
    • 제23권2호
    • /
    • pp.25-36
    • /
    • 2022
  • 본 연구에서는 감압정의 침투수 처리 효과를 정량적으로 분석하여 소규모 필댐과 하천제방에서 제체를 통과하는 침투수의 처리 효과를 확인하였다. 이를 위해 댐과 제방에서의 제체와 기초지반의 투수 특성에 따른 침투해석을 수행하여 침투수의 거동특성을 파악하여 댐 제체 선단에 작용하는 양압력을 분석하였다. 또한 감압정의 설치 조건을 변수로 분석하여 댐 또는 제방의 제체 선단에 작용하는 양압력의 감소 효과를 분석함으로써 침투수 처리 효과를 분석하였다. 감압정은 파이핑 현상 또는 양압력을 유발하는 제체의 선단 하부 기초지반에서의 작용 간극수압을 감소시키는 효과가 있는 것으로 평가되었으며, 제체의 높이 및 비탈면 기울기와 같은 기하학적 조건에 크게 영향을 받지 않고 간극수압을 관리할 수 있는 것으로 확인되었다. 투수성이 상대적으로 큰 조립토 지반에 비해 세립토 지반에서 감압정의 간극수압 저감 효과는 상대적으로 저하되지만 감압정이 설치되지 않은 조건에 비해서 간극수압 저감 효과를 기대할 수 있는 것으로 확인되었다. 감압정의 직경, 설치 깊이에 따라서 감압정의 저감 효과는 상대적으로 차이가 발생하지만 감압정의 설치 깊이가 침투수 관리에 가장 효과적인 것으로 확인되었다.

농업용 무인항공기를 활용한 농약방제 효율성 방안에 관한 연구 (A Study on Efficient Methods of Pesticide Control Using Agricultural Unmanned Aerial Vehicles)

  • 정가영;조용윤
    • 사물인터넷융복합논문지
    • /
    • 제8권2호
    • /
    • pp.35-40
    • /
    • 2022
  • 농업환경에서 농약방제는 농업인에게 작업 위험성과 높은 노동력을 요구한다. 무인항공기를 활용한 농약방제는 기후, 토지형태, 무인항공기의 특성에 따라 효율성이 다르게 나타난다. 따라서, 살포조건과 환경조건을 고려한 효율적인 무인항공기 농약방제 방안이 요구된다. 본 논문은 작물별 살포조건과 환경정보를 고려한 농업용 무인항공기 기반의 효율적인 농약 방제 시스템을 제안한다. 감수지 부착 후 고도 및 속도 변화에 따른 농약 낙하균일도 측정 및 작물 성장조건 변화에 따른 수관내부 약제 침투율 측정 실험을 통해 제안하는 모델의 효과성을 보였다. 실험결과, 무인항공기의 높이가 지면과 가까울수록 작물에 고르게 살포되지만 안전이 고려된 2m이상이 높이와 평균 2m/s의 속도에서 가장 방제효과가 적합하였다. 제안하는 방제 시스템은 농업환경에서의 다양한 무인항공기 활용 기반 지능형 서비스 개발에 도움을 줄 것으로 기대한다.

감마카메라에서의 팬텀 내 선원 위치 변화에 따른 산란 영향 평가 (The Evaluation of Scattering Effects for Various Source Locations within a Phantom in Gamma Camera)

  • 유아람;이영섭;김진수;김경민;천기정;김희중
    • 한국의학물리학회지:의학물리
    • /
    • 제20권4호
    • /
    • pp.216-224
    • /
    • 2009
  • $^{99m}Tc$은 핵의학 영상 획득 물리적 특성이 우수하지만 유기화 작용이 일어나지 않아 갑상선 호르몬의 합성능력이 없는 결절을 진단하는데 제한을 받는다. 이와는 달리 $^{131}I$은 유기화 작용으로 인하여 갑상선의 기능을 평가하는데 활용됨은 물론 높은 에너지의 베타선과 감마선을 방출함으로써 암의 치료에도 널리 사용되고 있는 방사선 핵종이다. 그러나 $^{131}I$은 단일에너지의 감마선을 방출하는 $^{99m}Tc$ 등과는 달리, 다양한 에너지의 감마선을 방출함으로써 핵의학 영상의 정량화가 어려운 단점이 있으며, 특히 고에너지 영역의 감마선에 의한 격벽투과와 산란선은 핵의학 진단영상에 악영향을 미치게 되는 단점이 있다. 본 연구에서는 팬텀 내에서 선원의 위치 변화에 따른 산란의 영향을 알아보기 위해 GATE (Geant4 Application for Tomographic Emission) 시뮬레이션 도구로 dual-head 감마카메라(ECAM), PMMA 팬텀(RADICAL, USA), 점선원 0.1 mCi를 사용하여 모사하였다. 팬텀 내에서 $^{131}I$ 점선원을 X축, Y축으로 위치를 변화시키며 영상을 획득하였다. 또 산란 매질의 유무에 따른 영향을 확인하기 위해 같은 위치에서 점선원이 팬텀 안에 있을 때와 공기 중에 있을 때를 비교 하였다. 저에너지 선원과 비교를 위해 같은 방법으로 $^{99m}Tc$으로도 시뮬레이션 하였다. 또한 시뮬레이션과 똑같은 환경에서 측정 실험을 통해 시뮬레이션의 타당성을 검증 하였다. 이 연구에서는 한 팬텀 내에서도 위치 변화에 따라 산란의 영향이 달라진다는 것을 시뮬레이션을 통해 확인하였다. 이러한 분포 변화는 시뮬레이션과 측정 실험 모두에서 동일한 경향을 나타내었으므로 시뮬레이션이 타당함을 확인할 수 있었다. 시뮬레이션을 이용하면 X축, Y축 위치 변화만 아닌 다양한 경우에 대해서도 위치 변화에 따른 산란 영향의 예상이 가능할 것이며 나아가 산란 보정 연구의 기초 자료로 사용될 것이라 생각한다.

  • PDF