• 한국가구학회지
• /
• 제12권1호
• /
• pp.1-9
• /
• 2001

This study was carried out to elucidate the relationship between wood anatomy and the water flow path in P. koraiensis and L. leptolepis. through the experiment of penetration of the dye solution. The experiment was performed by permeating 1% acid, alkali and direct solution into the xylem just after being cut. The results obtained were summarized as follows : 1. In P. koraiensis and L. leptolepis, the dye solution penetrated into sapwood and annual rings adjacent to cambial zone were only dyed according to ascent of tree height. 2. The penetrability of latewood was better than that of earlywood. 3. In P. koraiensis and L. leptolepis, the main water flow path in longitudinal direction was the trachied and that in transverse direction was ray trachied and ray parenchyma. Also, the dye solution was found in resin canal. 4. P. koraiensis was more permeable than L. leptolepis. 5. Among the acid, alkali and direct dye solution, the acid dye solution was the most permeable.

• 한국전자파학회논문지
• /
• 제25권7호
• /
• pp.767-773
• /
• 2014

본 논문에서는 무한 도체 평판의 슬릿 부근에 도체판을 부가하여 슬릿으로 침투하는 전자파의 저감 특성을 검토하였다. 이론 해석에는 FDTD 법을 사용하였으며, 부가 도체판의 형상 및 길이, 간격, 두께의 변화에 따른 침투 전계의 특성을 계산하여 부가 도체판의 구조 변화가 침투 전자파의 저감 특성 및 차폐 효과 특성에 미치는 영향을 고찰하였다. 그 결과, 부가 도체판의 구조 변화에 따라 차폐 효과, 침투 전계의 특성이 변화하는 것을 관찰할 수 있었고, 침투 전계를 최소로 하는 부가 도체판의 최적 구조가 있음을 확인할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제16권5호
• /
• pp.514-520
• /
• 2006

In this study, the performance of a digital pile rebounding and penetration monitoring system (DPRMS) is evaluated and the measurement precision of the DPRMS is improved. The DPRMS is a high speed line-scanning camera system to measure the rebound and penetration of a pile in a construction work. A main problem in the DPRMS is a measurement error, which is caused by a shock or vibration due to a hammer impact. The measurement error is investigated by analyzing vibration signals of the DPRMS during the impact. Moreover, the frequency response functions of the DPRMS are also analyzed. As a result, it is found that the tripod height has an influence on the DPRMS performance and a shorter tripod is better. One more founding in this study is that the DPRMS should be placed with a appropriate distance from a pile for improving the measurement precision.

• 한국전자파학회논문지
• /
• 제23권9호
• /
• pp.1094-1099
• /
• 2012

본 논문에서는 무한 도체 평판의 슬롯 부근에 도체판을 부가하여 슬롯으로 침투하는 전자파의 저감 특성을 검토하였다. 이론 해석에는 FDTD법을 사용하였으며, 부가 도체판의 길이, 폭, 위치 및 간격의 변화에 따른 침투 전계의 특성을 계산하여 부가 도체판의 구조 변화가 침투 전자파의 저감 특성에 미치는 영향을 고찰하였다. 그 결과, 부가 도체판의 구조 변화에 따라 침투 전계의 특성이 변화하는 것을 관찰할 수 있었고, 침투 전계를 최소로 하는 부가 도체판의 최적 구조가 있음을 확인할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1359-1364
• /
• 2008

It is well known that the standard penetration test (SPT) has been used in all over the world to get geotechnical properties of the ground. However, it is difficult to apply the SPT to the dense sand, gravel, weathered rock, etc. For the application of the SPT in these grounds, it is necessary to change in the diameter and the impact energy of the SPT. For the improvement of site investigation technology, Large Penetration Testing device (KICT-type LPT) was developed and applied to the in situ condition. The drop height and weight of the hammer in developed system were decided as 760mm and 150kg, respectively. And the developed sampler has the inner diameter of 63 mm and the length of 500 mm with the adjustment of energy ratio to the SPT of 1.5. In this study, the performance of KICT-type LPT was evaluated by using a calibration chamber system and pile driving analyzer (PDA)

• 한국생명과학회:학술대회논문집
• /
• 한국생명과학회 2000년도 제29회 국제학술심포지움 및 추계학술대회
• /
• pp.96-96
• /
• 2000

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.155-163
• /
• 1986

The purpose of this study was to measure penetration of dye stuff (2% Methylene blue, 2% Hematoxylin, 2% crystal violet and 2% safranin-O) on unfilled resin (Lang Dental MFG Co.) Hipol (Boopyung Dental Chemical Co. Macrocomposite resin) Durafill (Kulzer, Co. Microfilled Composite resin) and Heliosit (Vivadent Co. Microfilled Composite resin) The unfilled resin with dough stage was inserted into plastic tuble (5mm in diameter and 4mm in height) with condensation force of 1000 gr, 2000 gr and without condensation force. Hipol mixed on the mixed pad was inserted into the plastic tube by the same method as the unfilled resin. The microfilled resins which were Durafill and Heliosit were polymerized for 60 seconds with the visible light on each surface of the plastic tube which was upper and lower, under condensation force of 1000 gr, 2000 gr and without condensation force. All specimens were stored in the air for 24 hours, then specimens were immersed in the various kind of dye solution for different period of time (1 hour and 24 hours). These dye-treated specimens were polished horizontally until removing 0.5mm of each surface on the emery paper (#1000), and the dye penetration in the polished surface was measured under the digital microscope (Japan Fosuh). Following results were obtained 1. The penetration of dyes was the most excessive in Durafill and was not influenced on the condensation force and the period of immersion time. 2. All dyes were penetrated into Hipol, and Crystal violet was penetrated most excessively in all dyes. 3. The penetration of dye in all resins was not influenced by the period of immersion time and condensation force. 4. There was no evidence of dye penetration in unfilled resin.

• 한국지반신소재학회논문집
• /
• 제16권2호
• /
• pp.67-77
• /
• 2017

본 연구에서는 콘 장비를 강관말뚝 중공에 설치함에 따른 말뚝의 거동을 분석하기 위해 축소 모형실험을 진행하였다. 콘 장비를 항타하여 설치 할 경우 먼저 강관 내부에 유입되는 관내토의 높이를 수치상으로 확인 할 수 있으며, 이를 통해 플러깅을 예측하여 플러깅에 따른 말뚝의 거동을 분석 할 수 있다. 또한 물리적인 항타 에너지로 지반의 강성과 강도를 증가 시켜 지지력을 상승 시킬 것으로 기대된다. 강사 장치를 이용하여 상대밀도 90%의 지반을 조성하고 거칠기가 다른 두 강관말뚝을 항타높이를 200mm와 500mm로 나누어 근입깊이 600mm까지 설치한다. 그리고 콘 장비의 유무에 따라 총 8가지 케이스를 나누어 말뚝의 지지력을 분석하였다. 말뚝의 항타높이, 말뚝의 거칠기, 콘 장비의 유무에 따른 세 가지 변수 중 항타높이가 약 70%로 지지력에 미치는 영향이 가장 컸으며 다음으로 콘 장비의 유무가 약 40%, 말뚝의 거칠기가 약 21%로 나타났다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.64-71
• /
• 2005

효과적인 초음속 연소를 위해 연료와 공기의 빠른 혼합이 필요하며, 혼합 향상을 위해 연료분사 방식에 대한 여러 연구들이 수행되어 왔다. 본 연구에서는 길이-깊이 비가 4.8, 후면 경사각이 $22.5^{\circ}$인 개방형 공동 모델을 사용하였으며, 마하수 1.92에서 운동량비에 따른 분사구 주변의 유동 특성 및 연소실 내 압력 분포를 슐리렌 가시화와 압력 측정을 사용하여 파악하였다. 운동량비는 연료의 침투거리와 분사지역의 유동에 큰 영향을 끼친다.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.132-139
• /
• 2002

In GMAW(Gas Metal Arc Welding) processes, bead geometry (penetration, bead width and height) is a criterion to estimate welding quality. Bead geometry is affected by welding current, arc voltage and travel speed, shielding gas, CTWD (contact-tip to workpiece distance) and so on. In this paper, welding process variables were selected as welding current, arc voltage and travel speed. And bead geometry was reasoned from the chosen welding process variables using neuro-fuzzy algorithm. Neural networks was applied to design FL(fuzzy logic). The parameters of input membership functions and those of consequence functions in FL were tuned through the method of learning by backpropagation algorithm. Bead geometry could be reasoned from welding current, arc voltage, travel speed on FL using the results learned by neural networks. On the developed inference system of bead geometry using neuro-furzy algorithm, the inference error percent of bead width was within $\pm$4%, that of bead height was within $\pm$3%, and that of penetration was within $\pm$8%. Neural networks came into effect to find the parameters of input membership functions and those of consequence in FL. Therefore the inference system of welding quality expects to be developed through proposed algorithm.