• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.563-569
• /
• 2001

In order to utilize the processing wastes of squid, chitosan was prepared by intermittent deacetylation treaoent of $\beta-chitin$ contained richly in the pen of squid. Acetylchitosan also was synthesized from squid pen chitosan with anhydrous acetic acid and their characteristics were investigated. The amounts of nitrogen and ash of squid pen chitosan were $5.80.2\% and 0.2\pm0.03\%$ respectively, the yield of squid pen chitosan was $25\pm3\%$, the degree of deacetylation was $92\%$, and the molecular weight was $1.15\times10^6$, Acetyl contents of N-acetylchitosan powder, acetylchitosan bead, N-ACF-1 (N-acetylchitosan film-1) and N-ACF-2 (N-acetylchitosan film-2) were $55.9\%, 63.2\%, 56\% and 58.7\%$ respectively. Two major peaks, amide I ($1,653 cm^{-1}$) and II ($1,558 cm^{-1}$) bent, on FT-IR spectra of the N-acetylchitosan from squid pen were almost similar to these of $\beta-chitin$, While there was a broad single peak at $1,601 cm^{-1}$assigned to be an amide I bend in squid pen chitosan. The CP/MAS NMR spectra of $\beta-chitin$, squid pen chitosan and N-acetylchitosan from squid pen showed a relative broad and single peak at 74 ppm assigned to fifth carbon (C-5) and third carbon (C-3). In case of $\beta-chitin$ and N-acetylchitosan from squid pen, single peak at 74 ppm was showed as the same of $\beta-chitin$ type.

• Journal of the KSME
• /
• v.44 no.4
• /
• pp.69-74
• /
• 2004

Navigation이라고 하는 용어는 매우 다양한 분야에서 여러 가지 의미로 사용되고 있다. 예를 들어, 차량에 장착되어 운전자에게 지리 및 교통정보를 알려 주는 car navigation system, 미사일 등의 비행체가 원하는 곳으로 이동하기 위한 navigation system, PDA나 휴대폰 등 potable 전자기기의 입력을 위한 Pen입력장치에 사용되는 Pen궤적 추적 장치, 개인의 운동량을 측정하거나, 해저탐사, 등산 시 사용되는 personal navigation system, 가상현실게임 등 매우 다양한 분야에서 navigation 기술이 사용되고 있다.(중략)

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2001.10a
• /
• pp.54.2-54
• /
• 2001

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.6
• /
• pp.529-535
• /
• 1984

This study aims at obtaining the basic data for the development of pen shell culture at Yoja Bay, the southwest coast of Korea. The authors dealt with the annual gonadal changes of the pen shell, Atrina pectinata japonica, to find out the gametogenesis, reproductive cycle and spawning season, and to investigate the fluctuation in the larval occurence in Yoja Bay. From July 1983 to June 1984, an average of 20 individuals as specimens were monthly collected by commercial fishing dredge near Manwol island located at the mouth of Yoja Bay. The degree of gonadal development was determined by the histological observations as resting spent stage, early developmental stage, after developmental stage, early spawning stage, after spawning stage and degenerative stage. According to these degrees of gonadal development, annual reproductive cycle of the pen shell population was determined. From July to August, the gonads were changed through degenerative into resting stage and, in September and October, they became entirely empty gonads. From November they showed the first sign of gametogenesis developing very slowly. Nevertheless, the developing gametes did not increase in number probably owing to a phagocytic phenomenon by phagocytes which appeared in the gonad during this stage. Some individuals started spawning in April and in May majarity of individuals were in spawning stage. In June, majority of the individuals showed signs of degenerative stage. Therefore, the authors came to a conclusion that the pen shells in Yoja Bay spawn chiefly in May. And this is also supported by the result of the survey on the planktonic occurrences of the pen shell larvae. Namely, there were no larvae at all in April, only a few in May and many in June by vertical water sampling.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.454-462
• /
• 1997

Thermotropic block copolyester(TLCP-b-PBN) based on poly(tetramethylene 2,6-(naphthaloyldioxy)dibenzoates)(TLCP) and poly(butylene 2,6-naphthalate)(PBN) was synthesized by solution polycondensation and melt-blended with poly(ethylene 2,6-naphthalate)(PEN) for in-situ composites. The TLCP domains showed nematic behavior in melt. The composition of block copolymer was determined from $^1H-NMR$ spectroscopy. The DSC thermogram of block copolymer revealed the presence of two major melting transitions, corresponding to the separete melting of PBN and TLCP domains. The glass transition temperature(Tg) of the PEN in the blends decreased with increasing the content of TLCP-b-PBN and the TLCP-b-PBN acted as a nucleating agent for the matrix polymers. In the 20% TLCP-b-PBN blend, well oriented TLCP fibriles were observed at temperature above the melting point of the PEN by optical microscopy. By scanning electron micrographs of cryogenically fractured surfaces of extruded blends, the TLCp domains were found to be finely and uniformely dispersed in 0.15 to $0.2{\mu}m$ size. Interfacial adhesion between the TLCP and matrix polymer was seemed to be good. Under certain condition TLCP formed a fiver structure in the PEN matrix, with thin oriented TLCP fibril in the skin region and spherical TLCP domains in the core.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.426-437
• /
• 2005

Statement of problem : Although zirconium oxide ceramics are more and more commonly used in restorative dentistry, for many clinical applications only limited data can be found in the literature. However it is quite clear that hydrofluoric acid etching is impossible with zirconia ceramics. Therefore, other bonding techniques are required in order to lute these materials adhesively. Purpose : The purpose or this study was to evaluate the effects of surface treatments on shear bond strengths between two resin cements and a zirconia ceramic. Materials and methods : Experimental industrially manufactured yttrium-oxide-partially-stabilized zirconia ceramic discs (Adens, Korea) were used for this study. The ceramic specimens divided into five experimental groups and a control group (as received). Five surface treatments were studied 1) sandblasting with 110$\mu$m $Al_2O_3$ at 3 bars pressure 13 seconds at a distance of 10 mm, 2) flame-treated with the Silano-Pen for 5 $s/cm^3$, 3) grinding with a diamond bur. 4) sandblasting + Silano-Pen treatment, 5) diamond bur preparation + Silano-Pen treatment. Acrylic plastic tube (5 mm in height and 3 mm in diameter) were filled with composite to fabricate composite cylinders The composite cylinders were bonded to the ceramic specimens with either Superbond C&B or Panavia F resin luting agents. All cemented specimens were tested under shear loading until fracture on universal testing machine at a crosshead speed 1mm/min; the maximum load at fracture was recorded. Sheat bond strength data were analyzed with oneway analysis of variance and Tukey HSD tests (P<.05). Treated ceramic surfaces and fracture surfaces after shear testing were examined morphologically using scanning electron microscope. Results: Ceramic surface treatment with Silano-Pen after sandblasting improved the bond strength of Superbond C&B resin cement. Supevbond C& B resin cement at Silano-Pen aiker sandblasting($27.4{\pm}3.8MPa$) showed statistically higher shear bond strength than the others. Conclusion: Within the limitation of this study, Superbond C& &B resin cement are suitable for cementation of zirconia ceramics and flame-treated with the Silano-Pen after sandblasting is required to enhance the bond strength.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.49-53
• /
• 2022

Ultra-thin glass (UTG) has been widely used in foldable display as a cover window for the protection of display and has a great potential for rollable display and various flexible electronics. The foldable display is under impact loading by bending and touch pen and exposed to other external impact loads such as drop while people are using it. These external impact loads can cause cracks or fracture to UTG because it is very thin under 100 ㎛ as well as brittle. Cracking and fracture lead to severe reliability problems for foldable smartphone. Thus, this study constructs finite element analysis (FEA) model for the pen drop test which can measure the impact resistance of UTG and conducts mechanical modeling to improve the reliability of UTG under impact loading. When a protective layer is placed to an upper layer or lower layer of UTG layer, stress mechanism which is applied to the UTG layer by pen drop is analyzed and an optimized structure is suggested for reliability improvement of UTG layer. Furthermore, maximum principal stress values applied at the UTG layer are analyzed according to pen drop height to obtain maximum pen drop height based on the strength of UTG.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.4
• /
• pp.205-215
• /
• 2006

Pen-input displays, such as LCD tablets and tablet PCs, are already popular for its usability in CAD design, in particular. in concept design phase. We propose an intuitive B-Spline modification scheme that can be used for the CAD systems targeting for such devices. Differently from the control point based modification schemes for the B-splines, our scheme relates user pen marking to determining the final shape of the target curve and surface. This, eventually, reduces time for interacting with the shape parameters (i.e., by control points or direct manipulators), which has been regarded as an unavoidable routine tasks for design. To prove its usability, we made an experiments with selected subjects who have been working for industrial design.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.67-73
• /
• 2012

연구 목적: 임플란트의 하부구조를 상부 구조와 연결하는 레진시멘트의 접착강도를 높이기 위한 기계적 화학적인 표면처리 방법들이 연구 되고 있다. 이 연구에서 다양한 크기의 $Al_2O_3$ sandblasting과 Silano Pen으로 표면처리한 티타늄과 레진 시멘트의 접착강도를 알아보고자 한다. 연구 방법: 12개의 티타늄(Ti-6A1-4V)시편을 디스크 형태로 제작하여 자가중합 수지에 매립하였다. 이들을 각각 6개의 군으로 나누어 $50{\mu}m$, $90{\mu}m$, $110{\mu}m$ 등 3가지 크기의 $Al_2O_3$로 sandblasting 하는 조건과 $Al_2O_3$로 sandblasting한 후 Silano Pen(Bredent, bredent GmbH &Co.KG, Senden, Germany)을 사용한 군으로 나누었다. 표면처리 한 티타늄 표면에 레진시멘트(Duolink dual syringe, Bisco, USA)으로 접착하였다. 그 후 증류수($37^{\circ}C$)에 24시간 보관 후 접착강도 실험을 시행하였고, SEM을 사용하여 표면처리 한 표면과 접착강도 실험 후 파절양상을 관찰하였다. 결과: 통계학적 분석에 따르면 Silano Pen을 사용하여 표면처리한 군들의 접착강도가 높았다(P<0.05). 결론: Silano Pen을 사용하는 것이 티타늄과 레진시멘트의 접착강도를 증가 시킨다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.165-171
• /
• 2017

Reading Pen is used mostly in educational purpose, yet its possibility is great as an input device for various IT devices. Reading Pen recognizes tiny dot patterns printed in papers, converts the patterns to corresponding codes, and plays audio contents that match the codes. Recognizing dot patterns and converting to the codes are the main function of Reading Pens, on which we focus and propose a novel algorithm. Such technology is never open to public and this paper is the first open attempt in this area. We test the algorithm and obtain 85% recognition ratio.