• 산업식품공학
• /
• 제15권3호
• /
• pp.262-268
• /
• 2011

The effects of pellet moisture content on physical properties (expansion ratio, density and breaking strength) of vacuum-puffed Yukwa (non-oil puffed Yukwa) were investigated in this study. The Yukwa was made from the waxy rice steeped at 25 and $30^{\circ}C$ for 3, 5 and 10 days with pellet drying times (6, 8 and 10.5 hr). As the drying time increased from 6 to 10.5 hr at $50^{\circ}C$, the highest value of pellet moisture content (29.4%) was found in the samples made from the steeped waxy rice at $25^{\circ}C$ for 5 days after 6 hr drying, while the lowest value (16.3%) was found at $25^{\circ}C$ for 3 days after 10.5 hr drying. Both redness and yellowness values of vacuum-puffed Yukwa increased as the drying time increased. The expansion ratio of Yukwa was greatly affected by drying time, ranging from 2.07 (26.8% pellet moisture content) to 7.01 (24.0% pellet moisture content). From the data, it can be concluded that the pellet moisture content had a significant influence on the physical characteristics of vacuum-puffed Yukwa. With vacuum puffing condition of 3 min heating and 2 min puffing, the pellets with about 25% moisture content showed higher expansion ratio, and lower density and breaking strength.

• 한국초지조사료학회지
• /
• 제36권4호
• /
• pp.271-279
• /
• 2016

본 연구는 IRG의 사료 가치 및 보관성 향상을 목적으로 소형 펠렛밀의 동력 구동방식 및 함수율이 IRG 펠렛의 성형 특성 및 품질에 미치는 영향을 규명하기 위해 실시되었다. IRG의 펠렛 형성은 재료의 함수율에 큰 영향을 받았다(p<0.05). 펠렛밀의 종류별로 약간의 차이는 있지만, 함수율 25% 조건이 외관, 부하량 및 온도 변화를 고려했을 때 IRG 펠렛 성형에 가장 적합한 것으로 나타났다. 펠렛의 경도는 펠렛밀의 종류에 관계없이 함수율이 높을수록 낮아지는 경향을 보였다. 15~25% 조건의 함수율이 내구도에 미치는 영향은 적었지만, 함수율 25% 조건에 비해 30% 조건에서는 내구도가 급격히 떨어지는 결과를 보였다 (p<0.05). 펠렛밀의 종류와 함수율에 관계없이 IRG 펠렛 성형전에 비해 성형 후에 건물 함량이 높아졌으며(p<0.05), 펠렛 성형과정에서 발생되는 압축열과 재료의 급격한 수분 손실로 인해 총 세균수는 크게 감소되는 결과를 보였다. 따라서 본 연구의 결과에서 IRG 펠렛 형성에 바람직한 함수율은 25%로 나타났으며, 원형 펠렛밀 보다는 수평형 펠렛밀 특히, roller 구동의 수평형 펠렛밀이 IRG 펠렛 형성에 유리한 것으로 판단된다. 또한 IRG에 대한 펠렛 성형은 IRG의 사료 가치 및 장기 보관성 향상에 긍정적인 방법인 것으로 사료된다.

• 산업식품공학
• /
• 제23권3호
• /
• pp.186-192
• /
• 2019

본 연구는 팽화스낵에 기능성 및 영양적으로 뛰어난 인삼의 활용도를 높이고자 각 조건별로 팽화스낵을 제조해 품질특성을 조사하였다. 수분함량(1, 4, 7, 10%)을 달리하여 pellet을 제조하고, 백미와 혼합한 뒤 팽화온도(180-220℃)를 달리하여 스낵을 제조하였다. 팽화스낵 제조 시, pellet의 수분함량과 팽화온도가 낮을수록 팽화가 잘 일어나지 않아 딱딱한 질감과 온전하지 않은 모양으로 제조되었다. 색도에서는 pellet의 수분함량과 팽화온도가 높을수록 명도, 적색도, 비체적은 증가하는 경향을 나타내었지만, 조직감에서는 감소하였다. 이에 따라 인삼을 이용한 팽화스낵 제조 시에는 적절한 수분함량과 팽화온도가 필요할 것으로 생각된다.

• Journal of Biomedical and Translational Research
• /
• 제19권4호
• /
• pp.103-109
• /
• 2018

Aspergillus luchuensis 34-1 was inoculated into wheat pellets with different conditions of raw materials to produce nuruk. The degree of substrate reactivity improvement of steam treated raw materials compared with that of non-heat treated was analyzed. The water content of the pellet was adjusted to 25% and 35%, and steam treatment for 10 minutes improved the substrate reactivity at 2.1-fold and 3.1-fold, and sterilization was also possible. The characteristics of improvement pellet nuruk were investigated according to the degree of crushing and water content of raw materials according to the temperatures and humidities ($23^{\circ}C$, $30^{\circ}C$ and RH 60%, RH 80%). The pH of the pellet nuruk was higher depending on the temperature, humidity and moisture content of the koji were lower, and the pH of the flour-pellet nuruk was lower than that of 2 mm milling wheat-pellet nuruk according to milling degree. It can be seen that the milling degree affects the growth of mold. The acidity and amino acid were generally higher as fermentation time increased. Also, the higher the incubation temperature, humidity and moisture content, the higher the value. Glucoamylase activity was significantly the highest in moisture content 35% D2b nuruk, cultured at $30^{\circ}C$ and 80% RH for 38 hours. This is higher than the previous reports on glucoamylase of rice-koji or commercial nuruk using fungi isolated from traditional nuruk. From these study, it is expected that making of improvement pellet nuruk would save the fermentation time considerably compared with traditional nuruks.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권6호
• /
• pp.112-119
• /
• 2017

In this study, the availability of cow manure as raw material for solid fuel production was investigated. Since the water content of the cow manure was too high, it was dewatered using a laboratory hydraulic compressure ($11.3kg/cm^2$). The moisture content of the cow manure decreased from 82.01% to 73.36 wt.%. The dewatered cow manure was homogenized by the experimental apparatus and then put into the rotating cylindrical apparatus. From the consecutive processes, the cow ball-shaped pellet which size ranged from 3.0 to 25.0 mm was produced. The major factor for making palletized fuel from cow manure was the moisture content. Based on the experimental data, the moisture content of cow manure for pelletizing cow manure was identified as 65~75 wt.%. When the moisture content of the cow manure was lower than 30 wt.%, the diameter of the pellets maded from cow manure was smaller than 3 mm. On the other hand, when the water content of the cow manure was higher than 75 wt/%, the diameter of the processed pellets tended to be larger than 25 mm. The characteristics of the processed cow manure pellets was analyzed to be in accordance with the livestock solid fuel quality standard. The pyrolysis characteristic of the pellet was analyzed by raising the heating temperature of the experimental equipment from 200 to $900^{\circ}C$. The mass change between of 20 and $130^{\circ}C$ corresponds to the amount of moisture contained in the cow manure. The amount of moisture was about 15% of the total weight of cow manure samples. The cow manure pellet was thermally stable up to $280^{\circ}C$. It can be interpreted that combustion of cow manure pellet does not occur until the surface temperature reaches $280^{\circ}C$. The mass change of pellet between of 280 and $450^{\circ}C$ was considered to be due to the vaporization of volatile organic compounds (VOCs) present in the cow manure pellet. The maximum production of VOCs was showed near $330^{\circ}C$.

• Journal of Biosystems Engineering
• /
• 제43권2호
• /
• pp.119-127
• /
• 2018

Purpose: Fermented feedstuffs have been found to improve productivity, reduce manure odor, and increase immunity. However, because there is not a commercialized pelletizing system for fermented total mixed ration (TMR) for pig feeding in Korea, a pelletizing system using TMR fermented feed was developed. Methods: The particle size, density, and volumetric density of the TMR feeds used in the test were measured. The pellet durability index (PDI, %) value of the pelletized TMR feed based on its moisture content, and the amount of pellet production based on the rotation speed of the compression roller were measured. Results: The test materials, TMR1 and TMR2, were approximately compressed to 387 kg/m3 with 18.2% (w.b.) and 544 kg/m3 with 22.2% (w.b.), respectively. Throughout this pellet molding test, the moisture content from 15 to 20% (w.b.) of mixture feedstuffs, including fermented forage, could be used for pellet molding. Based on the results, a small-scale pellet molding system of fermented TMR was designed and manufactured for pig farms. As rotation speed increased, the throughput increased, whereas the moisture content decreased by approximately 2% (w.b.) because of pellet molding. The best yield of pellets with 94.2% PDI was of 536 kg/h at 135 rpm rotation speed. Conclusions: Although the throughput of the prototype increased as the rotation speed increased, it was difficult to operate because of the greater noise and the lower PDI (%) at the higher rotation speed of the pellet molding rotor. It was found that the best production of pellets using the prototype was 536 kg/h having a PDI of 94.2% or more at a rotation speed of 135 rpm.

• Journal of Forest and Environmental Science
• /
• 제25권2호
• /
• pp.127-130
• /
• 2009

This study has been carried out to investigate the characteristics of the commercial wood pellets such as moisture content, heating value, ash content, and chemical component. The wood pellets from national forestry cooperatives federation and China were evaluated to see if they can be 1st or 2nd class of Korea standard. Indonesian pellet was estimated to be a 3rd class because of the heating value and high ash content. It is considered that there is a quality difference in wood pellets in accordance with the production nations. It could be originated from the difference of raw materials produced in different region.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.703-719
• /
• 2017

Miscanthus had a higher lignin content (19.5 wt%) and carbohydrate (67.6 wt%) than other herbaceous crops, resulting in higher pellet strength and positive effect on combustion. However, miscanthus also contains a high amount of hydrophobic waxes on its outer surface, cuticula, which limits the pellet quality. The glass transition of lignin and cuticula were related to forming inter-particle bonding, which determined mechanical properties of pellet. To determine the effects of surface waxes, both on the pelletizing process and the pellet strength were compared with raw and extracted samples through solvent extraction. In addition, to clarify the relationship between pellet process parameters and bonding mechanisms, the particle size and temperature are varied while maintaining the moisture content of the materials and the die pressure at constant values. Furthermore, kraft lignin was employed to determine the effect of kraft lignin as an additive in the pellets. As results, the removal of cuticula through ethanol extractions improved the mechanical properties of the pellet by the formation of strong inter-particle interactions. Interestingly, the presence of lignin in miscanthus improves its mechanical properties and decreases friction against the inner die at temperatures above the glass transition temperature ($T_g$) of lignin. Consequently, it could found that the use of kraft lignin as an additive in pellet reduced friction in the inner die upon reaching its glass transition temperature.

• 청정기술
• /
• 제22권4호
• /
• pp.286-291
• /
• 2016

본 연구는 억새 바이오매스로 성형한 연료펠릿의 실용화를 앞당기기 위해 소나무 톱밥 펠릿과 비교한 성형 단계별 물리적 특성 변화, 소요 전력 그리고 성형된 펠릿의 품질을 조사하고, 연소 특성 개선을 위해 석회혼합 비율별로 펠릿을 성형하여 회분 함량 등 연소특성을 조사하였다. 겉보기 밀도는 억새가 원료단계와 분쇄 후에 소나무 톱밥에 비해 낮았으나 펠릿 성형 후에는 소나무 톱밥과 비슷하였다. 수분함량은 억새가 원료 단계에서 소나무 톱밥에 비해 높았으나 분쇄 후에는 비슷하였고, 펠릿 성형 후에는 낮아졌다. 억새는 소나무 톱밥 펠릿성형 공정에 없는 밀도증가 단계가 있지만 총 소요 전력이 비슷하였고, 성형된 펠릿의 내구성과 성형율도 소나무 톱밥과 차이가 없었다. 억새 펠릿은 석회혼합 비율이 증가함에 따라 회분함량이 증가하고 고위 발열량이 다소 낮아졌으나, 회분 용융점이 높아지고 clinker 발생률은 감소하는 경향이었다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.382-398
• /
• 2017

This study was conducted to identify the potential of Quercus mongolica (QUM), Pinus densiflora (PID) and Pinus rigida (PIR) as a raw material for pellet production. Larix kaempferi (LAK), which has mostly been used for pellet production in Korea, was also used as a control. All specimens contained very minimal amounts of sulfur and chlorine. Ash content of LAK was the lowest, followed by PID, PIR and QUM. For the size distribution, the mass fraction between 0.42 mm and 0.25 mm was the highest in PIR. Most fuel characteristics of the produced wood pellets improved with the use of 12% moisture content (MC) particles and the increase of the ratio of length to diameter of a hole in flat-die (L/D ratio). When the MC, bulk density and durability of QUM, PID, PIR and LAK pellets was compared with the standards of the KFRI and ISO, the use of wood particles of 12% MC and flat-die with an L/D ratio of 5.00 for PID particles are suitable for high-quality pellets in the aspects of all fuel characteristics. For PIR and QUM, further work is needed to seek the optimum conditions for the production of high-quality and durable pellets.