• Korean Journal of Optics and Photonics
• /
• v.34 no.5
• /
• pp.185-191
• /
• 2023

We report the results of evaluating the hardness, flexibility, and adhesion between the protective layer and the stealth sheet after applying a protective layer to improve the practicality of the flexible stealth sheet. The result of the ISO 15184 pencil hardness test showed that the hardness increased from HB to 3H by three grades when a protective layer was applied. The flexibility evaluation was conducted by bending the material against cylinders of certain diameters and observing whether cracks occurred according to the ASTM D522 test method. The result showed that the minimum diameter was 0.125 inches. The adhesion was evaluated by using the ASTM D3359 test method, attaching and peeling off an adhesive strip to the protective layer and determining the proportion of the protective layer peeling off. The result was 5B, which is better than the military adhesion limit of 4B.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.6
• /
• pp.860-867
• /
• 2012

Codonopsis lanceolata serves as, an appetizing health food for its, characteristic flavor, taste, and texture:however, it requires a long and complicated cooking process. Therefore, this study conducted pre-processing procedures to improve the cooking process and Codonopsis lanceolata more easily. For processing efficiency, freezing and blanching were efficient for peeling and the rate of peel disuse. In addition the freezing process, effectively reduced the time spent in beating raw material. In the salinity test, freezing and blanching quickly increased salinity over 28 days. As the result of SEM cross-section tests showed that frozen Codonopsis lanceolata become porous, it's assumed that seasoning permeates into this cross-section efficiently. As the appearance of Deodeok-gui as significant differences according to the pre-processing methods, this study examined pre-processing methods(time spent in peeling, rate of peel disuse, time spent in beating out material, salinity, moisture content, texture, and the color) of Codonopsis lanceolata. After testing Deodeok-gui, it was found that freezing is effective, not only for process efficiency and cooking time reduction, but also for improving its qualities.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.2 no.2
• /
• pp.195-201
• /
• 1998

The purpose of this study is to evaluate the flexural strengthening effects of RC beams reinforced with carbon fiber sheets (CFS) in variable of strengthening amount and anchorage length of CFS. This study can be summarized as follows ; The CFS shares the tensile stress such as rebar during loading test. Also, as the strengthening amount of CFS is increased, the maximum flexural strength of RC beams reinforced with CFS is increased. Therefore, it is confirmed that the CFS's strengthening method is very effective to improve the flexural strength of RC beams. The maximum flexural strength of RC beams with CFS is determined by bond failure between CFS and concrete surface. So, the evaluation of CFS's strengthening effect can be calculated using the tensile stress of CFS which is peeling. When the anchorage length of CFS is increased, the ductility of RC beams is increased because of delaying the peeling of CFS. But, in case of same anchorage length of CFS, when the strengthening amount of CFS is increased, the ductility is decreased. Therefore, it is considered that the anchorage of CFS in the end zone is necessary.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.3
• /
• pp.23-26
• /
• 2006

For mechanical and electrical stability and environment protection. Cu and stainless steel stabilizers are laminated to a Ag layer to produce a composite neutral-axis(N-A) architecture in which the YBCO layer is centered between the oxide buffered metallic substrate and stabilizer strip lamination. This architecture allows the wire to meet operational requirements including stresses at cryogenic temperature. winding tensions as well as mechanical bending requirements including thermal and electrical stability under fault current conditions. We have experimentally studied mechanical properties of the laminated stainless steel and Cu stabilizers on YBCO coated conductors. We have laminated YBCO coated conductors by continuous dipping soldering process. We have investigated lamination interface between solder and stabilizer of the YBCO coated conductor. We evaluated bonding properties. tensile / shear bonding strength. and peeling strength laminated YBCO coated conductors.

• Journal of Institute of Convergence Technology
• /
• v.5 no.1
• /
• pp.13-17
• /
• 2015

In wafer level molding progress, the thermal releasing failure phenomenon is shown up as the important problem. This phenomenon can cause the problem including the warpage, crack of the molded wafer. The thermal releasing failure is due to the insufficiency of adhesion strength degradation of the molding tape. To solve this problem, we studied experimental method increasing the release property of the molding tape through the plasma surface treatment on the wafer substrate. In this research, the vacuum plasma treatment system is used for release property improvement of the molding tape and controls the operating condition of the hydrophilic($O_2$, 100kW, 10min) and hydrophobic($C_2F_6$, 200kW, 10min). In order to perform the peeling test for measuring the releasing force precisely, we remodel the micro scale material property evaluation system developed by Korea institute of industrial technology. In case of hydrophilic surface treatment on the wafer substrate, we can figure out the releasing property of molding tape increase. In order to grasp the effect that it reaches to the release property increase when repeating the hydrophilic treatment, we make an experiment with twice treatment and get the result to increase about 12%. We find out the hydrophilic surface treatment method using plasma can improve releasing property of molding tape in the wafer level molding process.

• Journal of the Korea Furniture Society
• /
• v.13 no.1
• /
• pp.27-37
• /
• 2002

This study was investigated with the surface properties such as physical and accelerated tests of wood-based floorings. In physical test, hardness and abrasion resistance values of laminate floorings were higher than those of others. The center line average surface roughness($R_a$) of imported laminate flooring was highest value($1.34{\mu}m$) and that of imported solid wood flooring was lowest value($0.62{\mu}m$). In cold resistance and moist heat resistance, no defects were found on the surface of all flooring (crack, blistering, peeling, and gloss loss etc.) after testing. Wet-cold-dry cycle test showed that plywood flooring appeared some cracks. In accelerated weathering test, color difference increased with increasing Xenon arc light irradiation

• The Korean Journal of Rheology
• /
• v.3 no.1
• /
• pp.22-29
• /
• 1991

In an effort to predict the long term durability of carbon fiber/epoxy composites in a space environ-ment interlaminar shear strength (ILSS) of the composites was measured as a function of 0.5 MeV electron radiation dosage. For the ILSS measurements a notch method (ASTM D3846) was used with and without side-supports. the supports were used to prevent peeling or bending during the test. The ILSS of both T300/ 5209 longitudinal composite system increases monotonically with radiation when the test is corried out without the support the ILSS of the composites increases initially but then decreases with further radiation. It is also observed that the ILSS of the unsupported case is much lower than that of the supported case. Measurement of epoxy modulus shows that the elastic modulus increases monotonically with radiation. But the breaking strength of the epoxy decreases with radiation. Electron Spectroscopy for Chemcal Analysis shows that the oxygen contents at both the pure epoxy surface and the composite fracture surface increase with radiation dose resulting in the increase of polarity at the interfacial region. This may be a supporting evidence for the increase in the ILSS of the composites.

• Journal of Species Research
• /
• v.11 no.3
• /
• pp.188-193
• /
• 2022

Araeosoma owstoni Mortensen, 1904, a newly recorded sea urchin, was collected from the Korea Strait by trawling during a research expedition in April 2017. The specimen was damaged and was severely peeled off on the aboral side during trawling. However, a test and the surface of the oral side of the sample were well preserved, allowing us to successfully identify it. The species was distinguished by the large and flexible test, the tiny apical section, and the interambulacra width which is twice of the ambulacra. Pedicellaria tridentate and triphyllous were presents, but tetradactyle pedicellaria was absent due to severe peeling on the aboral side. Moreover, a length of 1,212 bp sequence from mitochondrial COI gene was obtained and this sequence covered the general DNA barcoding region. The mean of interspecific divergence within A. owstoni from Korea and other eight species of Araeosoma from the GenBank was 6.8%. This value indicated that our species was clearly distinguishable from the others. Thus, the first Araeosoma species occurring in South Korea is presented in this study.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.357-364
• /
• 2019

This study comparatively analyzed hair damage by hair bleach particles and identified three different bleach particle sizes using a scanning electron microscope (SEM). The powdered bleaching agents made of ammonium persulfate (APS) and potassium persulfate had particle sizes of $131{\mu}m$, $72{\mu}m$ and $48.8{\mu}m$. According to a hair damage test, cuticle lift-up or peeling hardly occurred when small bleach particles were used. In terms of hair color, the hair bleached with larger bleach particles was the darkest, while the hair bleached with small bleach particles was the brightest. The results found that for bleaching agents that are more effective in easing hair damage, those with little particles should be used. In addition, it appears that the selection of particles depending on the degree of hair bleaching would enhance bleaching effects and reduce hair damage. The above process is a way to get great results in selecting a bleaching agent. It is anticipated that hair damage could be reduced during hair bleaching based on the above results.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.49-56
• /
• 2005

Recently the Volatile Organic Compound, HCHO, a harmful object spout from the construction materials is made an issue of social problem. Also the appearance of the building where the confidentiality is high was interior air pollution and it was brought about a huge problem. The government research facility and a relation industry sector conducts a many effort to improves like this actual condition. The Diverse ability building material which contains the natural material of the jade, the charcoal and the hwangto instead of the finish material which contains the harmful chemical material, is becoming development and utility. Hereupon the study have carried out research on hwangto plaster that was composed of hwangto and rice straw. The result of test that is deduced by basic proportion is properly appeared with suitable ratio of the hwangto and the sand to 4:6~5:5 by the compressive strength and crack control, workability. The result of test, that adds the rice straw to basic blending for a crack control, appeared with the fact that it is most suitable 3%to add the rice straw that has a length of 0.5cm~2cm. The result of test that plaster over the large size to compare a cement plaster with a hwangto plaster show a similar efficiency by workability. Also it controlled the crack and peeling off actual condition which is discovered from the hwangto plaster of existing perfectly.