• Journal of the Speleological Society of Korea
• /
• v.45 no.46
• /
• pp.49-67
• /
• 1996

After the opening of Gosu - cave, as tourist has increased, the inner parts and outer regions of cave is changed. This paper focuses on the environmental changes according to development of tourist resort in Gosu-cave. The result of this study can be found in the following facts: (1) As cave is opened lighting equipments set up for the purpose of helping inspection and coming in and out. (2) As the temperature rises in the coming in and out of tourist, this is caused to dry and peel off the topographes in cave. (3) The quality of water in cave is contaminated by the wastes, garbages and coins by tourists. (4) As Chungju - Dam has constructed, the linkages of the other tourist resort of Gosu - cave is improved. It is raised on the accessability of Gosu - cave. (5) As people has access to Gosu - cave, tourists increased more than the former times. Thus this phenomenon is contributed to the increasements of regional incomes and opportunity of regional employment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.76-79
• /
• 2003

The characteristic of single wall carbon nanotube (SW-CNT) and herringbone nano fiber (HB-CNF) emitters was described. SW-CNT synthesized by arc discharge and HB-CNF prepared by thermal CVD were mixed with binders and conductive materials, and then were formed by screen-printing process. In order to obtain efficient field emissions, the surface treatment of rubbing & peel-off was applied to the printed CNT and CNF emitters. The basic structure of FED was of a diode type through fully vacuum packaging. Also, we proposed a new triode type of field emitter using a mesh gate plate having tapered holes and could achieve the ideal triode properties with no gate leakage currents.

• Journal of Powder Materials
• /
• v.29 no.2
• /
• pp.123-131
• /
• 2022

The purpose of this study is to improve the mechanical properties and develop manufacturing technology through self-soluble alloy powder flame spray coating on the surface of a run-out table roller for hot rolling. The roller surface of the run-out table should maintain high hardness at high temperatures and possess high wear, corrosion, and heat resistances. In addition, sufficient bonding strength between the thermal spray coating layer and base material, which would prevent the peel-off of the coating layer, is also an important factor. In this study, the most suitable powder and process for roll manufacturing technology are determined through the initial selection of commercial alloy powder for roll manufacturing, hardness, component analysis, and bond strength analysis of the powder and thermal spray coating layer according to the powder.

• Analytical Science and Technology
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2024

In agricultural households cultivating vegetables and fruits, the use of various pesticides to protect crops from diseases and pests or to control weeds is widely practiced enhancing quality and productivity. However, pesticides can pose a threat to consumer health by remaining on the food surface or migrating into the food interior. Households commonly peel off skins, wash with water, or use chemical methods to remove foreign substances including residual pesticides on the food surface. In this study, we measured the washing rate by comparing the pesticide concentrations before and after washing in the leafy vegetable perilla leaves and the fruits strawberries and apples, which were intentionally exposed to pesticides. We compared washing rates using tap water, a baking soda solution, and a commercially available food-specific cleaning solution. The target pesticides for analysis were azoxystrobin, bifenthrin, boscalid, difenoconazole, flubendiamide, and indoxacarb, and the residual pesticide analysis was performed using GC-MS/MS or LC-MS/MS. The removal rates of pesticides were highest with the food-specific cleaner, followed by baking soda and tap water in order.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.3
• /
• pp.442-450
• /
• 2011

Numerous studies have suggested that dietary flavonoids contribute to prevent cardiovascular disease. Onion contains many functional phytochemicals such as quercetin. The aim of this study was to examine whether onion peel extracts supplementation affect blood lipid profiles and blood coagulation in animal model. Total 48 Sprague-Dawley male rats at 5 weeks old were divided into 6 groups with different diets(C: control, HF: high fat diet, HFOE 0.01%: high fat+onion peel extract 0.01% diet, HFOE 0.02%, HFOE 0.05%, HFOE 0.1%) for 8 weeks. Onion peel extract supplementation significantly decreased serum levels of LDL-cholesterol and increased HDL-cholesterol, while total cholesterol and triglyceride levels were not affected. Hematological parameters(hematocrit, white blood cell, red blood cell, and platelet count) and blood coagulation parameters(prothrombin time, activated partial thromboplastin time, thrombin time, and fibrinogen) were not significantly different among 6 groups. However, activated partial thromboplastin time of HFOE 0.05% group was significantly longer than that of HF group. These results indicate that onion peel extract supplementation displays hypocholestrolemic effects but does not seem to have anti-coagulation effects in high fat fed SD rats.

• 보존과학연구
• /
• s.25
• /
• pp.171-195
• /
• 2004

This research presents an evaluation of the weathering and deterioration state of the Wanggung-ri five-storied stone pagoda in the Iksan (National Treasure No. 289) and suggests conservational schemes. A deterioration map of the pagoda was drawn from the aspects of petrological, physical, chemical, biological, structural and artificial weathering.The rock properties consisting of the pagoda were medium-grained biotite granite that had leucocratic phenocryst developed in parts. The body of each story suffered severely from the secondary contamination that turned the colors into light grey, pitch dark, yellowish brown, and reddish brown as well as granular decomposition, exfoliation and peel-off. The roof stones were heavy exfoliated or peeled off in most of the cases. In addition to the fine cracks, there were layered cracks on the corners. The roof stones of the3rd and 4th story in the north and west side had some stones fall-off, while those of the 2ndstory in the north side had steel reinforcement filled for a fixing purpose. Those of the 5th story showed big gaps that must have originated from cracks and were easily subject to granular decomposition and rainfall. The inside clay filler was missing in the lower part of the roof stones of the 4th and 5th story and the supporting stones, which were thus covered by light grey or pitch dark sediments. The contact area of the materials was about 70 % in the parts where there was a space due to the filler missing and washigher than 90 % in the lower parts of the pagoda. About 90 % or more of the roof stones surface of each story were covered by aerial plants that formed a thick biological mat. Thus it seemed necessary to come up with the conservational measures to remove the plans living on the surface of the stone materials, with the plans to prevent rain from falling inside, and with the water repellent and hardening treatments to postpone the surface weathering of the rock properties. All those measures and plans must be based on the results of long-term monitoring and thorough detail investigations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.445-450
• /
• 2011

We studied the adhesion characteristics of polymer films (PC, PET, EVA) treated by atmospheric pressure plasma. The process parameters were the frequency, gas flow, and treatment time; we studied the effects of these parameters on the adhesion characteristics of the polymer materials. We used de-ionized water and diiodomethane as the polar and nonpolar solvents, respectively, for measuring the contact angles, and subsequently calculated the surface free energy of each polymer film. The adhesion characteristics were studied by carrying out a $180^{\circ}$ peel-off test. The polymer films treated with plasma developed a hydrophilic surface, which led to increased surface free energy and improved adhesion properties. From the results for contact angle, surface free energy, and adhesion strength, we obtained the optimal plasma-treatment conditions.

• Food Science and Preservation
• /
• v.22 no.2
• /
• pp.241-250
• /
• 2015

This study investigated the sensory attributes of Satsuma mandarins to provide basic data for the establishment of a quality grade establishment of mandarins. Samples of the mandarins in different sizes (small, medium, and large) were collected via organic green house cultivation, conventional cultivation without pesticides and conventional cultivation in Jeju Island. Eight trained panels performed the triplicate measurements. From the results of the quantitative descriptive analysis, mandarin samples were selected with five types of appearances (gloss intensity, color intensity, peel width, damage degree, and peel texture), three types of odors (sour, sweet, fresh), six types of tastes (sour, sweet, bitter, fresh, tasteless, and off flavor) four types of texture (hardness, granule toughness, juicy, and tough feel), and three types of after-tastes (sour, sweet, and bitter). The results of the analysis of the quality characteristics of the samples showed that their, pH, total acidity and solids contents differed depending on the size of the samples more than their cultivation methods. The correlation coefficients between the quality properties of the mandarins showed that their, sample size was positively correlated with their peel width and toughness. Moreover, the soluble solid of sample was positively correlated with its color intensity, sweet and fresh orange flavor. However, soluble solid content of the samples was negatively coreelated with their bitter flavor, tastelessness, and off flavor. In the principal component analysis of the sensory attributes data, PC1 represented the soluble solid, gross intensity, orange color, sour and sweet odor, unique mandarin flavor (sweet and, fresh orange), etc., and PC2 (26.77%) the size, pH, sample acidity, and peel texture.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.7
• /
• pp.427-431
• /
• 2017

In this paper, we discuss ${\beta}-Ga_2O_3$ thin films that have been grown on freestanding GaN (FS-GaN) using furnace oxidation. A GaN template was grown by horizontalhydride vapor phase epitaxy (HVPE), and FS-GaN was fabricated using the laser lift off (LLO) system. To obtain ${\beta}-Ga_2O_3$ thin film, FS-GaN was oxidized at $900{\sim}1,100^{\circ}C$. Surface and cross-section of prepared ${\beta}-Ga_2O_3$ thin films were observed by field emission scanning electron microscopy (FE-SEM). The single crystal FS-GaNs were changed to poly-crystal ${\beta}-Ga_2O_3$. The oxidized ${\beta}-Ga_2O_3$ thin film at $1,100^{\circ}C$ was peel off from FS-GaN. Next, oxidation of FS-GaNwas investigated for 0.5~12 hours with variation of the oxidation time. The thicknesses of ${\beta}-Ga_2O_3$ thin films were measured from 100 nm to 1,200 nm. Moreover, the 2-theta XRD result indicated that (-201), (-402), and (-603) peaks were confirmed. The intensity of peaks was increased with increased oxidation time. The ${\beta}-Ga_2O_3$ thin film was generated to oxidize FS-GaN.

• Conservation Science in Museum
• /
• v.7
• /
• pp.43-51
• /
• 2006

From the low swamp remains in Sinchang-dong, Gwangju, a number of wooden lacquerware along with various wooden artifacts were excavated. These excavated lacquerware have deteriorated and weak wooden parts and the lacquer layer come off from the wooden parts; they are very likely to peel off and crack. Therefore, we impregnated the lacquerware in PEG#4000 40% solution that was effective for vacuum freeze drying and finished freeze-drying below 0°…. We compared the weight of wood and lacquerware right after the freeze-drying with the weight after leaving them in a airtight space with 60% RH (relative humidity). The comparison results showed no change in weight; thereby we confirmed controlling the finishing temperature during freeze-drying could control the moisture in wood after drying and it could stabilize wood against the change in moisture in the atmosphere. according to the analysis of the lacquer fragment, the base layer was pasted on the wooden surface with mixed black pigment and the upper layer was pasted three or four times with the mixture of lacquer and black pigment; or it was pasted without the black base coating.