• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.1-14
• /
• 2023

This study derives quantitative data on how much the fiscal deficit of subway operation agencies can be reduced in the process of charging free rides for the elderly in metropolitan subways during peak periods. In smart card data, every trip of elderly is recorded except fares. Therefore, it is required to establish a methodology for estimating the fares of elderly passengers and distributing them to subway opertation agencies as income. This study builds a simultaneous dynamic traffic allocation model that reflects the assumption that elderly selects a minimum time route based on the departure time. The travel route of the elderly is estimated, and the distance-proportional fare charged to the elderly is calculated based on this, and the fare is distributed by reflecting the connected railway revenue allocation principle of the metropolitan subway operating agencies. As a result of conducting a case study for before and after COVID-19 in 2019 and 2020, it is analyzed that Seoul Metro's annual free loss of 360 billion won could be reduced 6~8% at the morning peak (07:00-08:59), and 13~16% at the morning and afternoon peak (18:00-19:59).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.18-29
• /
• 2022

Since the operation of an reft-turn actuated signal driven mainly by vehicles may increase the waiting time for walking, this signal causes inconvenience or stress to pedestrians. Therefore, in this study, the change in waiting time for walking before and after the application of an reft-turn actuated signal and the stress on the pedestrians were investigated through a questionnaire. The investigation showed that the waiting time for walking increased by 37% during non-peak time. Also the waiting time for walking of 62.1% of pedestrians became longer and 78% of them were stressed because of it. Meanwhile, simulation(VISSIM) showed that the vehicle travel speed slightly decreased to 1.07km/h(a 2.5% decrease), and the average waiting time for walking decreased by 15.51sec(a 28% decrease) with a pedestrian priority actuated signal. Therefore, it is expected that the pedestrian priority actuated signal can reduce the waiting time for walking and relieve pedestrian stress.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.449-460
• /
• 2015

The reliability of air quality evaluation results for green transportation could be improved by applying correct emission factors. Unlike previous studies, which estimated emission factors that focused on vehicles in laboratory experiments, this study investigates emission factors according to road types and time using real driving data. The real driving data was collected using a Portable Activity Monitoring System (PAMS) according to road types and time, which it compared and analyzed fuel consumption from collected data. The result of the study shows that fuel consumption on national highway is 17.33% higher than the fuel consumption on expressway. In addition, the average fuel consumption of peak time is 4.7% higher than that of non-peak time for 22.5km/h. The difference in fuel consumption for road types and time is verified using ANOCOVA and MANOVA. As a result, the hypothesis of this study - that fuel consumption differs according to road types and time, even if the travel speed is the same - has proved valid. It also suggests correction factor of emission factors by using the difference in fuel consumption. It is highly expected that this study can improve the reliability of emissions from mobile pollution sources.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3421-3430
• /
• 2021

Spherical NaI(Tl) detectors are used in gamma-ray spectrometry, where the gamma emissions come from the nuclei with energies in the range from a few keV up to 10 MeV. A spherical detector is aimed to give a good response to photons, which depends on their direction of travel concerning the detector center. Some distortions in the response of a gamma-ray detector with a different geometry can occur because of the non-uniform position of the source from the detector surface. The present work describes the calibration of a NaI(Tl) spherical detector using both an experimental technique and a numerical simulation method (NSM). The NSM is based on an efficiency transfer method (ETM, calculating the effective solid angle, the total efficiency, and the full-energy peak efficiency). Besides, there is a high probability for a source-to-detector distance less than 15 cm to have pulse coincidence summing (CS), which may occur when two successive photons of different energies from the same source are detected within a very short response time. Therefore, γ-γ ray CS factors are calculated numerically for a ¹⁵²Eu radioactive cylindrical source. The CS factors obtained are applied to correct the measured efficiency values for the radioactive volumetric source at different energies. The results show a good agreement between the NSM and the experimental values (after correction with the CS factors).

• Journal of Korean Port Research
• /
• v.7 no.2
• /
• pp.19-36
• /
• 1993

In this study for relieving traffic congestion on the main arterial in Pusan using TSM Techniques, the travel system, roadway system and signal system analyses were dine. Through these above analyses, it was shown that the peak-time periods on the main arterial were shaped between 10 : 00 and 11 : 00 in the morning and between 15 : 00 and 16 : 00 in the afternoon for the business and shopping trips. Especially, there appeared to be about 23% reduction in the average delay when roadway system management including left-turn links increased were done, about 29% reduction in the average delay when signal system management including the signal phases and timings readjusted were conducted, and about 48% reduction in average delay when roadway system and signal system management were taken into consideration simultaneously. Based upon these results, it was concluded that there might be considerably better results in the average delay if the progressive signal system analyses on the arterial were applied with the land and road widths balanced, the difference on the turning vehicles and mid-block volumes readjusted, and roadside parking traffic prohibited.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.3
• /
• pp.75-85
• /
• 2020

Few studies have dealt with the question of when Mt. Baekdusan became known as a volcano. Attention has been focused rather on the issue of establishing the boundary between the Joseon Dynasty and the Qing Dynasty than the scientific nature of Baekdusan as a volcano. It is only in the late Joseon Dynasty that Park Jong (1764), who was the scholar of the Gwanbuk region, authored the first travel journal on Mt. Baekdu and described poseok. Due to the scientific curiosity of Westerners on the existence of mysterious snow peak on the border, it was first introduced to the Royal Geographical Society by a British man, H.E.M. James in 1887, who revealed for the first time that Mt. Baekdu is a dead volcano, and that the white color on the top is due to wide-spread pumice. Russian expedition teams including Strel'bitskii (Стрельбицкий, 1894, and Garin (Гарин-Михайловский, 1898), also explored this mountain seeking natural resources and territory of East Asia and the Manchurian region in pursuit of Russian Imperial interests explored and described Baekdusan as a volcano.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.55-70
• /
• 2018

Recently, as shared transportation services has expanded, integrated mobility services that link personal transportation and public transportation are paid attention. To do this, it is necessary to analyze trip mode chaining behavior. This study analyzed the characteristics of the trip mode chaining behavior using the 2010 travel diary survey in Seoul, and analyzed factors to affect mode choice of trip chaining through the multinomial logit model. The transportation means were classified into passenger cars, city buses, intercity buses, railways, taxis, and others, and 25 trip mode chaining types were identified. Among them, the trip share connected between city bus and railways was the highest. It was also found that the trip mode chaining occurred mainly at commuting and in the morning and afternoon peak. According to the model results, the mode choice of trip chaining is significantly influenced by individual attributes (sex and age), household attributes (car ownership and income), trip attributes (trip purpose, trip time and trip length), and arrival area attributes (number of subway lines and bus lines, ratio of commercial area, land use mix and central region).

• Economic and Environmental Geology
• /
• v.29 no.6
• /
• pp.699-712
• /
• 1996

Field scale experiments using an automated 144-channel TDR system were conducted which monitored the movement of solute through unsaturated loamy soils. The experiments were carried out on two different field plots of 0.54 ha to study the vertical movement of solute plume created by applying a square pulse of $CaCl_2$ as a tracer. The residence concentration was monitored at 24 locations on a transect and 5 depths per location by horizontally-positioning 50 cm long triple wire TDR probes to study the heterogeneity of solute travel times and the governing transport concept at field scale. This paper describes details of experimental methodology and calibration aspects of the TDR system. Three different calibration methods for estimation of solute concentration from TDR-measured bulk soil electrical conductivity were used for each field site. Data analysis of mean breakthrough curves (BTCs) and parameters estimated using the convection-dispersion model (CDE) and the convective-lognormal transfer function model (CLT) reveals that the automated TDR system is a viable technique to study the field scale solute transport providing a normal distribution of resident concentration in a high resolution of time series, and that calibration method does not significantly affect both the shape of BTC and the parameters related to the peak travel time. Among the calibration methods, the simple linear model (SLM), a modified version of Rhoades' model, appears to be promising in the calibration of horizontally-positioned TDR probes at field condition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.33-40
• /
• 2002

This paper presents the evaluation result of the Namsan 1st tunnel traffic information system, which is providing the real time queue length status and incidence information inside of the Namsan 1st tunnel, 1600meters long in the Seoul metropolitan CBD. This information system plays an important role because of notifying drivers to pay a toll for the tunnel path, the congestion information in advance. According to the analysis, an evident improvement on the tunnel path and its bypass without any conspicious adverse impact. Furthermore, survey analysis found that motorists placed a high value on the provided information. During peak time, the system turned out to help motorists to relax their hasty minds. As well, several performance indices showed the reduction of congestion and travel time variation on both of the tunnel path and its bypass, in spite of no traffic information on the bypass.

• Journal of Korean Society of Transportation
• /
• v.31 no.5
• /
• pp.60-70
• /
• 2013

This study aims to develop a truck priority on left-turn algorithm that can reduce greenhouse gas emissions by reducing heavy duty truck's stops at signalized intersection. The signal priority is granted for a left-turn phase, because heavy duty trucks can deteriorate left-turn traffic flow due to the low acceleration or deceleration rate and large turn radius. Truck priority allows to provide the stable speed control for heavy duty truck, and reduces emissions at the signal intersection. Also, two signal recovery strategies are compared for various traffic conditions. This study analyzes the effectiveness of truck priority such as greenhouse gas emissions and fuel consumption reduction, and total travel time saving using the PARAMICS and Comprehensive Modal Emissions Model (CMEM). The results show that signal priority for heavy duty trucks has an effect on reducing greenhouse gas emissions and fuel consumptions at non-peak hour. Also, it shows decreasing total travel time due to reducing truck stops.