• 제목/요약/키워드: peak to peak analysis

검색결과 4,742건 처리시간 0.043초

Capillary Electrophoresis를 이용한 국내산 쌀의 품종 판별 (Discrimination of Domestic Rice Cultivars by Capillary Electrophoresis)

  • 류미라;김은영;안미옥;김상숙
    • 한국식품과학회지
    • /
    • 제30권6호
    • /
    • pp.1252-1258
    • /
    • 1998
  • 재배 면적이 비교적 넓은 국내산벼 10품종 백미의 알콜용해성단백질을 capillary elictrophoresis로 분석하고 품종간 단백질 pattern의 차이를 비교 분석하므로써 신속한 품종판별법으로서의 적용가능성을 검토하였다. P-ACN buffer를 이용한 분석조건에서 각 품종은 25분 이내에 분석완료 되었으며 peak pattern의 특징에 따라 동진벼 group, 추청벼 group 및 일품벼 group의 3group으로 분류할 수 있었다. 동진벼, 계화벼, 영남벼가 동진벼 group으로 분류되었으며 이 group에서는 다른 품종에서는 거의 나타나지 않은 peak h가 전체 peak area의 $6{\sim}8%$를 차지하며 뚜렷이 검출되었다. 추청벼 group은 peak h를 제외한 대부분의 peak가 동진벼 group과 비슷하게 나타났으며 추청벼, 오대벼, 만금벼 및 봉광벼 4품종이 해당되었다. 일품벼 group으로 분류된 일품벼, 화성벼 및 화영벼에서는 peak g가 전체 peak의 약 70%라는 압도적인 비율을 나타내었다. 주요 peak의 뚜렷한 차이에 따라 3 group으로 분류하기는 하였으나 일품벼, 오대벼 등의 일부 품종은 단독으로 구별이 가능하였으며 각 group 내에서도 미미하기는하나 구성 peak들을 면밀히 비교 분석하므로써 품종에 따른 특성을 도출할 수 있었다. 또한 다른 분석법과 비교할 때 우리 나라에서 재배면적이 50% 이상으로 가장 많은 동진벼와 추청벼는 각 현미의 윗면, 측면, 앞면의 화상을 이용한 품종판별법에서 서로 오판될 확률이 비교적 높았으나 CE로는 peak h에 의해 서로 쉽게 구분되었다.

  • PDF

Numerical Analysis of Through Transmission Pulsed Eddy Current Testing and Effects of Pulse Width Variation

  • Shin, Young-Kil;Choi, Dong-Myung
    • 비파괴검사학회지
    • /
    • 제27권3호
    • /
    • pp.255-261
    • /
    • 2007
  • By using numerical analysis methods, through transmission type pulsed eddy current (PEC) testing is modeled and PEC signal responses due to varying material conductivity, permeability, thickness, lift-off and pulse width are investigated. Results show that the peak amplitude of PEC signal gets reduced and the time to reach the peak amplitude is increased as the material conductivity, permeability, and specimen thickness increase. Also, they indicate that the pulse width needs to be shorter when evaluating the material conductivity and the plate thickness using the peak amplitude, and when the pulse width is long, the peak time is found to be more useful. Other results related to lift-off variation are reported as well.

태양전지 모듈 어레이 시뮬레이션을 이용한 최대전력점 패턴분석 (Pattern Analysis of Maximum Power Point by means of Solar Cell Module Array Simulation)

  • 정지원;박인규;황국연;안태천
    • 한국지능시스템학회논문지
    • /
    • 제23권1호
    • /
    • pp.72-79
    • /
    • 2013
  • 본 논문에서는 태양광 발전시스템의 최대전력점을 추종하기 위해, 개방회로전압과 가까운 첫 번째 지역극대전력점(local peak power point)의 전압 및 전류값이 특정한 범위 내에 있을 경우, 첫 번째 지역극대점이 전역극대전력점(global peak power point)인지 판단할 수 있도록 패턴을 분석하였다. 직-병렬 어레이로 연결된 태양전지 모듈에 부분그늘문제(partial shading problem)가 발생할 경우 다수의 지역극대전력점이 관찰될 수 있어, 전역극대전력점을 찾는데 어려움이 있다. 부분선형 태양전지 모델을 이용한 태블로 해석(Tableau analysis)으로 태양전지 어레이 회로의 V-I 특성을 시뮬레이션하여 지역극대전력점과 전역극대전력점을 확인하고, 그에 해당하는 전압 및 전류 값과 V-I 특성곡선의 패턴을 분석하였다. 분석된 패턴을 통해 특정한 영역을 설정하여 첫 번째 지역극대전력점이 전역극대전력점 인지 판단하여 발전하는 경우, 첫 번째 지역극대전력점으로만 발전했을 때에 비해 효율이 향상되었다.

Peak Factors for Bridges Subjected to Asynchronous Multiple Earthquake Support Excitations

  • Yoon, Chong-Yul;Park, Joon-Seok
    • 한국방재학회 논문집
    • /
    • 제11권1호
    • /
    • pp.7-13
    • /
    • 2011
  • 지진에 대한 장대 교량의 정확한 반응 해석은 지진 방재에 있어서 중요한 역할을 한다. 본 논문은 비동기 다지지점 지진입력에 의한 교량의 반응을 진동수 영역방법과 시간 영역방법으로 해석하였으며 그 결과를 동기 입력 결과와 비교하였다. 시간영역방법에서는 선형모드 중첩 법으로 최대반응 값을 계산하였다. 진동수영역방법에서는 선형랜덤진동 이론을 사용하여 교량 성능에 영향을 미치는 모드와 다지지점 지진입력의 상호상관관계를 고려한 반응의 제곱평균근(RMS값)을 계산하였다. 교량 성능 반응 중, 변위 및 부재의 내력에 대한 시간 영역해석 결과와 진동수영역 해석 결과로부터 최대반응 값과 RMS값의 비로 정의된 최대반응 계수의 실용적인 값과 계산 방법을 요약하였다. 신뢰 있는 최대 반응계수가 있으면, 교량의 성능기반설계에서 구체적인 임의의 입력을 고려한 시간영역방법보다 결과의 일반성 및 수치적인 장점을 갖은 진동수영역방법이 더 효율적이다.

Analysis of the dynamic confining effect of CRAC short column under monotonic loadings

  • Wang, Changqing;Xiao, Jianzhuang
    • Structural Engineering and Mechanics
    • /
    • 제74권3호
    • /
    • pp.351-363
    • /
    • 2020
  • Based on the dynamic tests of recycled aggregate concrete (RAC) short columns confined by the hoop reinforcement, the dynamic failure mechanism and the mechanical parameters related to the constitutive relation of confined recycled aggregate concrete (CRAC) were investigated thoroughly. The fracturing sections were relatively flat and smooth at higher strain rates rather than those at a quasi-static strain rate. With the increasing stirrup volume ratio, the crack mode is transited from splitting crack to slipping crack constrained with large transverse confinement. The compressive peak stress, peak strain, and ultimate strain increase with the increase of stirrup volume ratio, as well as the increasing strain rate. The dynamic confining increase factors of the compressive peak stress, peak strain, and ultimate strain increase by about 33%, 39%, and 103% when the volume ratio of hoop reinforcement is increased from 0 to 2%, but decrease by about 3.7%, 4.2%, and 9.1% when the stirrup spacing is increased from 20mm to 60mm, respectively. This sentence is rephrased as follows: When the stirrup volume ratios are up to 0.675%, and 2%, the contributions of the hoop confinement effect to the dynamic confining increase factors of the compressive peak strain and the compressive peak stress are greater than those of the strain rate effect, respectively. The dynamic confining increase factor (DCIF) models of the compressive peak stress, peak strain, and ultimate strain of CRAC are proposed in the paper. Through the confinement of the hoop reinforcement, the ductility of RAC, which is generally slightly lower than that of NAC, is significantly improved.

Biomechanical Analysis of Injury Factor According to the Change of Direction After Single-leg Landing

  • Kim, Jong-Bin;Park, Sang-Kyoon
    • 한국운동역학회지
    • /
    • 제26권4호
    • /
    • pp.433-441
    • /
    • 2016
  • Objective: The purpose of this study was to understand the injury mechanism and to provide quantitative data to use in prevention or posture correction training by conducting kinematic and kinetic analyses of risk factors of lower extremity joint injury depending on the change of direction at different angles after a landing motion. Method: This study included 11 men in their twenties (age: $24.6{\pm}1.7years$, height: $176.6{\pm}4.4cm$, weight: $71.3{\pm}8.0kg$) who were right-leg dominant. By using seven infrared cameras (Oqus 300, Qualisys, Sweden), one force platform (AMTI, USA), and an accelerometer (Noraxon, USA), single-leg drop landing was performed at a height of 30 cm. The joint range of motion (ROM) of the lower extremity, peak joint moment, peak joint power, peak vertical ground reaction force (GRF), and peak vertical acceleration were measured. For statistical analysis, one-way repeated-measures analysis of variance was conducted at a significance level of ${\alpha}$ <.05. Results: Ankle and knee joint ROM in the sagittal plane significantly differed, respectively (F = 3.145, p = .024; F = 14.183, p = .000), depending on the change of direction. However, no significant differences were observed in the ROM of ankle and knee joint in the transverse plane. Significant differences in peak joint moment were also observed but no statistically significant differences were found in negative joint power between the conditions. Peak vertical GRF was high in landing (LAD) and after landing, left $45^{\circ}$ cutting (LLC), with a significant difference (F = 9.363, p = .000). The peak vertical acceleration was relatively high in LAD and LLC compared with other conditions, but the difference was not significant. Conclusion: We conclude that moving in the left direction may expose athletes to greater injury risk in terms of joint kinetics than moving in the right direction. However, further investigation of joint injury mechanisms in sports would be required to confirm these findings.

권총의 최대반동력 측정 및 해석 (Measurement and analysis the peak recoil force of pistol)

  • 엄혁
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.1033-1036
    • /
    • 1996
  • In Pistol, the peak recoil force affects the reliability of the frame and the accuracy of target shooting. To attenuate the peak recoil force of pistol, we develop measuring test bed, which consists of force sensors, linear sensor and a high speed video camera, execute tests with several Pistol models and compare the results measured.

  • PDF

한국어 비음의 음향학적 구분을 위한 장구간 스펙트럼(LTAS) 분석 (Long Term Average Spectral Analysis for Acoustical Discrimination of Korean Nasal Consonants)

  • 최순애;성철재
    • 대한음성학회지:말소리
    • /
    • 제60호
    • /
    • pp.67-84
    • /
    • 2006
  • The purpose of this study is to find some acoustic parameters on frequency domain to distinguish the Korean nasals, $/m,\;n,\;{\eta}/$ from each other. The new parameters are devised on the basis of LTAS (Long Term Average Spectrum). The maximum peak amplitude and the relevant formant frequency are measured in low and high frequency range, respectively. The frequency of spectral valley and its energy level are also obtained in the specific frequency range of the spectrum. Spectral slope, total energy value in specific frequency range, statistical distribution of spectral energy like centroid, skewness, and kurtosis are suggested as new parameters as well. The parameters that show statistically significant differences across nasals are summerized as follows. 1) in syllable initial positions: the total energy value from 1,500 to 2,200 Hz(zeroENG); 2) in syllable final positions: the peak amplitude of the first formant(peak1_a), the formant frequency with maximum peak amplitude from 4,000 to 8,000 Hz(peak2_f), the maximum peak amplitude of the formant frequency from 4,000 to 8,000 Hz(peak2_a), and the total energy value from 1,500 to 2,200 Hz(zeroENG).

  • PDF

스펙트럴 피크 트랙 분석을 이용한 음성/음악 분류 (Speech/Music Discrimination Using Spectral Peak Track Analysis)

  • 금지수;이현수
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.243-244
    • /
    • 2006
  • In this study, we propose a speech/music discrimination method using spectral peak track analysis. The proposed method uses the spectral peak track's duration at the same frequency channel for feature parameter. And use the duration threshold to discriminate the speech/music. Experiment result, correct discrimination ratio varies according to threshold, but achieved a performance comparable to another method and has a computational efficient for discrimination.

  • PDF

도시 소하천 개발에 따른 유출 변화량의 모의기법에 관한 연구

  • 김성원;조정석
    • 한국환경과학회지
    • /
    • 제7권4호
    • /
    • pp.451-460
    • /
    • 1998
  • The objectives of this study Is to evaluate the total runoff yield, peak flow and peak flow travel time depending on the urbanization, return period and rainfall patterns at the downstream of Manchon urban watershed in TaeGu City. SWM(Storm Water Management Model) is used for runog analysis based on 5 different steps of urbanization and 4 different types of Hufrs quartile according to 8 return periods. It is analyzed that the order of total runoff yield according to raiun patterns is Huffs 4, Huffs 2. Huffs 3 and Huffs 1 quartile, that of peak flow magnitude is Huffs 2, Huffs 1, Huffs 4 and Huffs 3 quartile at present development ratio. under the 60, 70, 80 and 90ft of urbanization to the 50% of urbanization by means of the rainfall patterns, the mean Increasing ratio of total runoff yield for each case is 4.55, 11.43, 16.07 and 20.02%, that of peak flow is 5.82, 13.61, 17.15 and 18.83%, the mean decreasing ratio of peak flow travel time Is 0.00, 2.44, 5.07 and 6.26%, the mean increasing ratio of runoff depth Is 4.51, 11.42, 16.02 and 20.05% respectively. the mean increasing ratio of total runoff yield by means of each and 19.71%. Therefore, as the result of this study. it can be used for principal data as to storm sewage treatment and flood damage protection planning in urban small watershed.

  • PDF