• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.713-720
• /
• 2000

The directional response of strength and deformation on the rocks acting by external loads is called by strength and deformability anisotropy, respectively. Peak strength and its failure criteria of anisotro rocks have been studied and reported. Many authors have investigated in detail the behavior of triaxial peak strength of anisotropic rocks(Jaeger 1960, McLamore & Gray 1967, Hoek & Brown 1980, Ramamurthy & Rao 1985). They concluded that the triaxial strength of anisotropic rocks varies according to the inclination of discontinuity in specimens. And, the minimun triaxial strength occurs in the specmen with 60° of inclination angle ; and specimens with 0° or 90° inclination have maximum triaxial strength. Based on the experimental result, the behavior triaxial strength is investigated. The triaxial compression tests due to the angle bedding plane have been conducted and the material constants, 'm' and 's', cohesion and angle of friction and nonlinear strength parameters to fit for the failure criterion were derived from the regression analysis. And, the experimental date are employed to examine three existing failure criteria for peak strength, provided by Jaeger, McLamore and Hoek & Brown and Ramamurthy & Rao. For a shale, the suitability of the failure criteiria of triaxial peak strength for anisotropic rocks is discussed.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2002년도 11월 학술대회지
• /
• pp.64-69
• /
• 2002

This study concerns the constraints of English Poetic Meter. In English poems, the metrical pattern doesn't always match the linguistic stress on the lines. These mismatches are found differently among the poets. For the lexical stress mismatched with the weak metrical position, $*W{\Rightarrow}{\;}Strength$ is established by the concept of the strong syllable. The peaks of monosyllabic words mismatched with the weak metrical position are divided according to which side of the boundary of a phonological domain they are adjacent to. Adjacency Constraint I is suggested for the mismatched peak which is adjacent to the left boundary of a phonological domain; *Peak] and Adjacency ConstraintII for the mismatched peak which are adjacent to the right boundary of a phonological domain. These constraints are various according to the poets(Pope, Milton and Shakespeare) : *[Peak [-stress], $W{\Rightarrow}{\;}*Strength$ and *Peak] in Pope; *[+stress][Peak [-stress] and *Peak] in Milton ; *[+stress][Peak [-stress], $W{\;}{\Rightarrow}{\;}*Strength$ and ACII in Shakespeare.

• 한국영어학회지:영어학
• /
• 제2권4호
• /
• pp.555-574
• /
• 2002

This study concerns the constraints of English Poetic Meter. In English poems, the metrical pattern doesn't always match the linguistic stress on the lines. These mismatches are found differently among the poets. For the lexical stress mismatched with the weak metrical position, W⇒ Strength is established by the concept of the strong syllable. The peaks of monosyllabic words mismatched with the weak metrical position are divided according to which side of the boundary of a phonological domain they are adjacent to. Adjacency Constraint I is suggested for the mismatched peak which is adjacent to the left boundary of a phonological domain; /sup */Peak] and Adjacency ConstraintⅡ for the mismatched peak which is adjacent to the right boundary of a phonological domain. These constraints are various according to the poets (Pope, Milton and Shakespeare) : /sup */[Peak [-stress], /sup */W⇒ Strength and /sup */Peak] in Pope; /sup */[+stress][Peak[-stress] and /sup */Peak] in Milton; /sup */[ +stress][Peak[-stress], /sup */W⇒Strength and Adjacency ConstraintⅡ in Shakespeare.

• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.115-121
• /
• 2008

The present study performed low-pressure steam curing with mortar specimens in order to examine the temperature profile and strength development of steam curing in high-strength specimens of 100MPa. In addition, as a basic research to utilize PC products, we examined the effects of curing temperature and time in steam curing cycle on strength development resulting from the hydration of cement within the range of high strength by changing four factors affecting the quality of PC displacement time, peak curing temperature, peak temperature duration, and ascending and descending gradient of temperature - in various patterns, and analyzed the optimal strength development characteristic based on the relation between temperature profile and strength development. With regard to the high-temperature curing characteristic of PC, we performed an experiment on the strength characteristic according to the temperature profile of high-strength mortar, and from the results of the experiment according to curing characteristic, displacement time, peak curing temperature, peak temperature duration, and ascending and descending gradient of temperature, we drew conclusions as follows.

• 대한인간공학회지
• /
• 제26권2호
• /
• pp.35-44
• /
• 2007

Work-related musculoskeletal disorders (WMSDs) are a major problem in industries in which manual materials handling is performed by workers. To prevent these WMSDs, it is necessary to understand the muscular strength capability and use this knowledge to design job and selection and assignment of workers. Even though two-hands lifting activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting are also very common at the industrial site and forestry and farming. However, a few researches have been done for one-hand lifting activity of manual materials handling tasks. The objective of this study is to compare one-hand and two-hands lifting strength in terms of static and dynamic strength of the lifting activity for the ranging from the height of knuckle to elbow. It is shown in this study that the isometric lifting strength of one-hand is ranging from 54.7 to 63.3% of the one of two-hands. However, it is found that there is no significant difference between a person's isometric lifting strength for left-hand and right-hand. It is also shown that there is no significant difference between the peak force under the dynamic sub-maximal loading with one-hand and two-hands lifting activity. Similar results were obtained for the peak acceleration and peak velocity under the dynamic sub-maximal loading with one-hand and two-hands lifting activity. Isometric lifting strength at the height of knuckle was ranging from 2 to 3 times of the dynamic peak force during sub-maximal lifting. It is concluded that the dynamic peak forces under the sub-maximal loading are not highly correlated with the isometric lifting strength in similar postures.

• 운동영양학회지
• /
• 제24권4호
• /
• pp.28-33
• /
• 2020

[Purpose] This study aimed to investigate the effects of branched-chain amino acid (BCAA) supplement on delayed onset muscle soreness (DOMS) by analyzing the maximum muscle strength and indicators of muscle damage. [Methods] Twelve men with majors in physical education were assigned to the BCAA group and placebo group in a double-blinded design, and repeated measurements were conducted. DOMS was induced with an isokinetic exercise. Following BCAA administration, the changes in the knee extension peak torque, flexion peak torque, aspartate aminotransferase (AST), creatine kinase (CK), and lactate dehydrogenase (LDH) concentrations were analyzed. The maximum knee muscle strength was measured at the baseline (pre-D0) following BCAA administration for 5 days before exercise (-D5, -4D, -3D, -2D, -1D). In contrast, the post-treatment measurements (D3) were recorded after BCAA administration for 3 days (post-D0, D1, D2). Blood samples were obtained before (pre-D0), immediately after (post-D0), 24 h (D1), 48 h (D2), and 72 h (D3) after the exercise to analyze the indicators of muscle strength. BCAA was administered twice daily for 8 days (5 days and 3 days before inducing DOMS and during the experimental period, respectively). [Results] There was no difference in the flexion peak torque between the groups. However, the BCAA group showed a significantly higher extension peak torque at D3 (second isokinetic exercise), compared to the placebo group (p<.05). There was no difference in AST changes between the groups. Nonetheless, the CK and LDH were significantly reduced in the BCAA group, compared to the placebo group. There was no correlation between the extension peak torque and flexion peak torque. However, the CK and LDH increased proportionately in DOMS. Moreover, their concentrations significantly increased with a decreasing peak torque (p<.01). [Conclusion] An exercise-induced DOMS results in a decrease in the peak torque and a proportional increase in the CK and LDH concentrations. Moreover, the administration of BCAA inhibits the reduction of the extension peak torque and elevation of CK and LDH concentrations. Therefore, BCAA might be administered as a supplement to maintain the muscle strength and prevent muscle damage during vigorous exercises that may induce DOMS in sports settings.

• 한국식품과학회지
• /
• 제34권6호
• /
• pp.1023-1029
• /
• 2002

본 연구는 천연전분과 hydroxypropyl화 전분에 가소제를 0, 16, 33, 50, 66% 비율로 첨가하여 RVA점도를 측정하고 필름을 제조한 후 물성을 측정하여 두 물성 사이의 상관관계를 알아보고자 행하였다. 필름의 인장강도는 가소제의 함량이 높아질수록 감소하였고 신장율과 수증기투과도는 증가하였으며 glycerol이 sorbitol보다 큰 변화를 보이는 것으로 나타났다. Hydroxypropyl화 전분이 천연전분에 비해 강도는 떨어지나 신장율은 높아지는 것으로 나타났고 수증기투과도는 2배 큰 것으로 나타났다. 가소제를 혼합하여 필름의 물성을 측정한 결과 sorbitol은 유연성보다는 필름의 강도를 유지하는 역할을 그리고 glycerol은 필름의 신장율을 증가시키는 역할을 하는 것으로 나타났다. RVA물성과 필름 물성의 관계에서 가장 연관성이 높은 것은 peak viscosity, 인장강도, 수증기투과도인 것으로 판명되었고 peak viscosity와 인장강도, peak viscosity와 수증기투과도의 관계는 각각 직선적인 것으로 나타났다. 따라서 RVA 물성 중 peak viscosity를 활용하여 필름의 인장강도, 수증기투과도를 예측할 수 있다고 판단되었다.

• Geomechanics and Engineering
• /
• 제17권6호
• /
• pp.553-564
• /
• 2019

This paper presents experimental results of rock-concrete bi-material discs under cyclically diametrical compression. It was found that both specimens under cyclical and static loading failed in three typical modes: shear crack, tensile crack and a combined mode of shear and wing crack. The failure modes transited gradually from the shear crack to the tensile one by increasing the interface angle between the interface and the loading direction. The cycle number and peak load increased by increasing the interface angle. The number of cycles and peak load increased with the interface groove depth and groove width, however, decreased with increase in interface groove spacing. The concrete strength can contribute more to the cycle number and peak load for specimens with a higher interface angle. Compared with the discs under static loading, the cyclically loaded discs had a lower peak load but a larger deformation. Finally, the effects of interface angle, interface asperity and concrete strength on the fatigue strength were also discussed.

• 한국전문물리치료학회지
• /
• 제20권3호
• /
• pp.45-53
• /
• 2013

The purpose of this study was to examine the differentiation of proprioception, invertor and evertor muscle strength, and time to peak torque at a velocity of $300^{\circ}/sec$ of the ankle joint in people with or without functional ankle instability (FAI). Nineteen subjects with a history of ankle sprain participated. All subjects were divided into FAI group ($n_1=9$, Cumberland ankle instability tool (CAIT)${\leq}24$) and a control group ($n_2=10$) based on their CAIT scores. Isokinetic dynamometer was used to measure the sense of active joint position of the ankle at mid-range and end-range of an inversion motion and invertor as well as the evertor muscle strength and time to peak torque at $300^{\circ}/s$. The FAI group showed a statistically reduction in invertor and evertor muscle strength and time to peak torque when compared to the control group (p<.05). Muscle strength and time to peak torque of the invertor and evertor, as well as the sense of active joint position at end-range were also lower in the FAI group than in the control (p<.05). Correlations between CAIT score and position sense at end-range (r=-.577) and invertor muscle strength (r=.554) were statistically significant (p<.05). Individuals with FAI showed reduction in invertor and evertor muscle strength and recruitment time as well as in proprioception of the ankle joint. Thus, proprioception and invertor and evertor muscle strength of the ankle joint at fast angular velocity may be investigated when examining and planning care for individuals with FAI.

• Computers and Concrete
• /
• 제22권6호
• /
• pp.563-572
• /
• 2018

Uniaxial compressive strength test and uniaxial compression creep one were produced on four groups of twelve concrete specimens with different hole number by RLW-2000 rock triaxial rheology test system. The relationships between horizontal holes and instantaneous failure stress, the strain, and creep failure stress, the strain, and the relationships between stress level and instantaneous strain, creep strain were studied, and the relationship between horizontal holes and failure mode was determined. The results showed that: with horizontal hole number increasing, compressive strength of the specimens decreased whereas its peak strain increased, while both creep failure strength and its peak strain decreased. The relationships between horizontal holes and compressive strength of the specimens, the peak strain, were represented in quadratic polynomial, the relationships between horizontal holes and creep failure strength, the peak strain were represented in both linear and quadratic polynomial, respectively. Instantaneous strain decreased with stress level increasing, and the more holes in the blocks the less the damping of instantaneous strain were recorded. In the failure stress level, instantaneous strain reversally increased, creep strain showed three stages: decreasing, increasing, and sharp increasing; in same stress level, the less holes the less creep strain rate was recorded. The compressive-shear failure was produced along specimen diagonal line where the master surface of creep failure occurred, the more holes in a block, the higher chances of specimen failure and the more obvious master surface were.