• 말소리와 음성과학
• /
• 제6권2호
• /
• pp.3-8
• /
• 2014

This paper deals with how mental fatigue has an effect on human voice. For this a monotonous task to increase the feeling of the fatigue and a set of subjective questionnaire for rating the fatigue were designed. From the experiments the designed task was proven to be monotonous based on the results of the questionnaire responses. To investigate a statistical relationship between speech features extracted from the collected speech data and fatigue, the T test for two-related-samples was used. Statistical analysis shows that speech parameters deeply related to the fatigue are the first formant bandwidth, Jitter, H1-H2, cepstral peak prominence, and harmonics-to-noise ratio. According to the experimental results, it can be seen that voice is changed to be breathy as mental fatigue proceeds.

• 천문학회보
• /
• 제39권1호
• /
• pp.32.2-32.2
• /
• 2014

We present a prediction for 21cm differential brightness temperature (dTb) from a set of strongly clustered sources of Population III and II objects at high redshift, from a suite of numerical simulations of their formation and radiative processes. These objects are located inside a highly biased density environment ("Rarepeak"), which is a rare, high-density peak which extends to ~7 comoving Mpcs. We study the impact on the resulting 21 cm signal from their ultraviolet and X-ray properties. The boost of emission (dTb>0) by high-density environment, moderate leakage of X-ray photons, and strong absorption due to Lyman-alpha pumping contrive to make Rarepeak a discernible, spatially-extended (sky angle~10') object around z~15, which is found to be detectable as a single object by Square Kilometre Array (SKA) with integration time of ~[600-2000] hours. We also examine detectability of many such peaks through SKA precursors.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.445-451
• /
• 2010

This paper presents a threshold adaptation based voice query transcription scheme for music information retrieval. The proposed scheme analyzes monophonic voice signal and generates its transcription for diverse music retrieval applications. For accurate transcription, we propose several advanced features including (i) Energetic Feature eXtractor (EFX) for onset, peak, and transient area detection; (ii) Modified Windowed Average Energy (MWAE) for defining multiple small but coherent windows with local threshold values as offset detector; and finally (iii) Circular Average Magnitude Difference Function (CAMDF) for accurate acquisition of fundamental frequency (F0) of each frame. In order to evaluate the performance of our proposed scheme, we implemented a prototype music transcription system called AMT2 (Automatic Music Transcriber version 2) and carried out various experiments. In the experiment, we used QBSH corpus [1], adapted in MIREX 2006 contest data set. Experimental result shows that our proposed scheme can improve the transcription performance.

• 한국지역사회생활과학회지
• /
• 제20권4호
• /
• pp.493-502
• /
• 2009

The purpose of this study was to investigate the properties of baguettes containing buckwheat flour. Physical properties of the bread flour mixed with buckwheat flour were tested by rapid visco analyzer(RVA), farinogram, and alveogram. Water activity of baguettes were measured and their properties were tested by rheometer. As the amount of buckwheat flour increased the peak viscosity and the holding strength were decreased, but the set back value was increased. Therefore, buckwheat flour prevented the gelatinization process. As the amount of buckwheat flour increased, the consistency and water absorption were increased, but development and stability were lower than the control. The bread flour containing high amount of buckwheat flour resulted in less breakdown and low farinogram quality number. As the amount of buckwheat flour was increased, Pmax, L, G, and W values were decreased on alveogram. The water activity and the springness of all samples were decreased during the storage, but the hardness was increased, especially after two days of storage. The sensory properties of baguette containing 10% buckwheat flour had the best scores.

• Structural Engineering and Mechanics
• /
• 제6권1호
• /
• pp.63-76
• /
• 1998

This paper presents dynamic responses of structures with sliding base which limits the translation of external loads from ground excitation. A discrete element model based on the discontinuous deformation analysis method is proposed to study this sliding boundary problem. The sliding base is simulated using sets of fictitious contact springs along the sliding interface. The set of contact spring is to translate friction force from ground to superstructure. Validity of the proposed model is examined by the closed-form solutions of an idealized mass-spring structural model subjected to harmonic ground excitation. This model is also applied to a problem of a three-story structural model subjected to the ground excitation of 1940 El Centro earthquake. Analyses of both sliding-base and fixed-base conditions are performed as comparisons. This study shows that using this model can simulate the dynamic response of a sliding structure with frictional cut-off quite accurately. Results reveal that lowering the frictional coefficient of the sliding joint will reduce the peak responses. The structure responses in little deformation, but it displaces at the end of excitation.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1390-1393
• /
• 1993

An 8b Fuzzy Coprocessor (FC) is presented that has eight programmable fuzzy algorithms and up to 256 inputs, 64 outputs and 16,384 rules. The 6.4mm2 chip fabricated in 1.0$\mu\textrm{m}$ CMOS technology can be used as a stand-alone device or as a macrocell for microcontrollers. Operating at 20MHz crystal frequency, it has a peak performance of 7.9M rules/s. Perspectives of future FC generations are also outlined, including a 12-16b resolution, additional fuzzy set operations, and optimized inference and defuzzification strategies.

• 대한전기학회논문지
• /
• 제45권4호
• /
• pp.517-525
• /
• 1996

A Simple AC complex circuit analysis for LCL type series resonant converter with phase shift control is proposed. Based on these analyses, a set of characteristic curves which allows a optimal design procedure for this converter is shown, without increasing the volt-ampere rating of tank circuit Especially, inverter output peak current can be minimized in both full load and partial load conditions. The presented design considerations can make the load range wide from full loads to light loads achieving turn-on with zero voltage switching (ZVS) operation. The detailed analysis and experimental results show the effectiveness of the proposed design algorithms. (author). refs., figs., tab.

• 대한산업공학회지
• /
• 제33권3호
• /
• pp.303-311
• /
• 2007

This study deals with a type of vehicle routing problem faced by manager of some department stores during peak sales periods. The problem is to find a set of traveling paths of vehicles that leave a department store and arrive at a destination specified for each vehicle after visiting customers without violating time and capacity constraints. The mathematical model is formulated with the objective of maximizing the sum of the rewards collected by each vehicle. Since the problem is known to be NP-hard, a heuristic algorithm is developed to find the solution. The performance of the algorithm is compared with the optimum solutions obtained from CPLEX for small size problems and a priority-based Genetic Algorithm for large size problems.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.587-588
• /
• 2005

Ozone is useful oxidizing gas for the fabrication of BSCCO thin films. In order to obtain high quality oxide BSCCO thin films, higher ozone concentration is necessary. The growth rates of the films was set in the region from 0.17 to 0.27 nm/min. MgO(100) was used as a substrate. In this paper oxidation property was evaluated relation between oxide gas pressure and inverse temperature(CuO reaction). The obtained condition was formulated by the fabrication of Cu metal thin film by co-deposition using the Ion Beam Sputtering method. Because the CuO phase peak appeared at the XRD evaluation of the CuO thin film using ozone gas, this study has succeeded in the fabrication of the CuO phase at $825^{\circ}C$.

• Macromolecular Research
• /
• 제10권6호
• /
• pp.365-368
• /
• 2002

Thermoplastic polyurethanes (TPUs) with different hard segment length has been prepared from a fixed molar ratio of poly(tetramethylene ether glycol), 4,4'-diphenylmethane diisocyanate, and 1,4-butanediol by different polymerization procedures. Results reveal that the on-set temperature of endotherms ( $T_{cc}$ ) due to the crystallization of hard segments by cooling the TPUs from melt and the peak temperature of endotherms due to the melting of hard segments ( $T_{mh}$ ) by heating the TPUs increased and levelled off with increasing the hard segment length of TPUs. It has also been observed that soft segment glass transition temperature ( $T_{gs}$ ) of TPU decreased slightly with increasing the hard segment length, which explains less mixing of soft segments and hard segments. In tensile measurement of TPUs, strain hardening is observed with increasing the hard segment length, which is attributed to the strain induced crystallization of soft segments.