• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.5
• /
• pp.393-399
• /
• 2004

Annual reproductive cycle of Siganus canaliculatus was studied based on monthly variation of gonadosomatic index (GSI) and histological changes of gonads. Samples were monthly collected by a set net along the southern coast of Jeju Island, Korea from January to December, 1996. Variation of the monthly mean GSI values showed similar trends in female and male. The GSI values increased from June and reached a peak in the spawning season in July $(9.65{\pm}1.96\;in\;females,\;10.00{\pm}4.27\;in\;males)$, and decreased rapidly thereafter. Female hepatosomatic index (HSI) values ranged from $1.26{\pm}0.22\;(in\;April)\;to\;2.34{\pm}0.39$ (in July), and male HSI values ranged from $1.27{\pm}0.21\;(in\;April)\;to\;1.87{\pm}0.30$ (in October). Annual reproductive cycle was classified into the following successive stages: in female, growing stage (from February to June), mature stage (from June to July), ripe and spawning stage (from July to August), recovery stage (from August to March); and in male, growing stage (from January to June), mature stage (from June to July), ripe and spent stage (from July to August), and recovery stage (from August to April). Based on these data, this species has a group-synchronous oocyte development and one spawning season a year.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1618-1629
• /
• 2003

The effects of the interaction between flow field and heat transfer caused by the longitudinal vortices are experimentally investigated using a five hole probe and a transient liquid crystal technique. The test facility consists of a wind tunnel with vortex generators protruding from a bottom surface and a mesh heater. In order to control the strength of the longitudinal vortices, the angle of attack of vortex generators used in the present experiment is 20$^{\circ}$, and the spacing between the vortex generators is 25mm. The height and cord length of the vortex generator is 20mm and 50mm, respectively. Three-component mean velocity measurements are made using a f-hole probe system, and the surface temperature distribution is measured by the hue capturing method using a transient liquid crystal technique. The transient liquid crystal technique in measuring heat transfer has become one of the most effective ways in determining the full surface distributions of heat transfer coefficients. The key point of this technique is to convert the inlet flow temperature into an exponential temperature profile using the mesh heater set up in the wind tunnel. The conclusions obtained in the present experiment are as follows: The two maximum heat transfer values exist over the whole domain, and as the longitudinal vortices move to the farther downstream region, these peak values show the decreasing trends. These trends are also observed in the experimental results of other researchers to have used the uniform heat flux method.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.5
• /
• pp.541-554
• /
• 1996

A set of 1994 data was analyzed to investigate the characteristics of background surface SO$_{2}$ concentrations at Kosan, Cheju Island, Korea. The SO$_{2}$ concentrations at Kosan site show a seasonal variation with a minimum(0.46 ppb) in summer, maximum(1.02 ppb) in spring and an annual mean of 0.83 ppb. These values were 4-7 times higher than those measured in other remote areas, such as Bermuda and Oki Island, but they were similar to the baseline concentrations of other sites in the world. The diurnal variation of SO$_{2}$ concentrations was very small and it shows a peak at 10 am in spring and fall, 2 pm in summer, and 1 pm in winter, respectively. Correlations between local meteorological parameters and SO$_{2}$ concentrations were mot significant. This suggests that the variations of the Kosan's SO$_{2}$ comcentrations were relatively independent on local meteorological variables. Backward trajectory analysis results showed that the seasonal variation of the OS$_{2}$ concentration was mainly due to the inflow of air masses from the continent in spring and from the Pacific Ocean im summer. The results also revealed that the air masses with the highest SO$_{2}$ concentration came through China or the Korea peninsula in spring and through Japan during summer. It was found that the SO$_{2}$ concentrations at Kosan were under the influence of passage of air masses arriving at this site.

• Earthquakes and Structures
• /
• v.10 no.4
• /
• pp.939-963
• /
• 2016

According to the new directives about the rational and efficient use of energy, thermal bridges in buildings have to be avoided, and the thermal insulation (TI) layer should run without interruptions all around the building - even under its foundations. The paper deals with the seismic response of multi-storeyed reinforced concrete (RC) frame building structures founded on an extruded polystyrene (XPS) layer placed beneath the foundation slab. The purpose of the paper is to elucidate the problem of buildings founded on a TI layer from the seismic resistance point of view, to assess the seismic behaviour of such buildings, and to search for the critical parameters which can affect the structural and XPS layer response. Nonlinear dynamic and static analyses were performed, and the seismic response of fixed-base (FB) and thermally insulated (TI) variants of nonlinear RC building models were compared. Soil-structure interaction was also taken into account for different types of soil. The results showed that the use of a TI layer beneath the foundation slab of a superstructure generally induces a higher peak response compared to that of a corresponding system without TI beneath the foundation slab. In the case of stiff structures located on firm soil, amplification of the response might be substantial and could result in exceedance of the superstructure's moment-rotation plastic hinge capacities or allowable lateral roof and interstorey drift displacements. In the case of heavier, slenderer, and higher buildings subjected to stronger seismic excitations, the overall response is governed by the rocking mode of oscillation, and as a consequence the compressive strength of the XPS could be insufficient. On the other hand, in the case of low-rise and light-weight buildings, the friction capacity between the layers of the applied TI foundation set might be exceeded so that sliding could occur.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.50-56
• /
• 2011

To meet the NOx limit without a penalty of fuel consumption, Urea-SCR system is currently regarded as promising NOx reduction technology for diesel engines. SCR system has to achieve maximal NOx conversion in combination with minimal $NH_3$ slip. In this study, map based open loop control for urea injection was developed and assessed in the European Transient Cycle (ETC) for heavy duty diesel engine. The basic urea quantity set-value which was calculated using the look up tables of engine out NOx, exhaust flow rate and optimum NSR resulted in NOx reduction of 80% and the average $NH_3$ slip of 24 ppm and maximum of 79 ppm. In order to reduce $NH_3$ slip, $NH_3$ storage control algorithm was applied to correct the basic urea quantity and reduced $NH_3$ slip levels to the average 15 ppm and maximum 49 ppm while keeping NOx reduction of 76%. With high and increasing SCR temperature, the $NH_3$ storage capacity decreases, which leads to $NH_3$ slip. The resulting $NH_3$ slip peak can be avoided by stopping or significantly reducing the urea injection during the SCR temperature gradient is over $30^{\circ}C/min$.

• Earthquakes and Structures
• /
• v.11 no.3
• /
• pp.517-538
• /
• 2016

This paper presents a probabilistic fragility analysis for two groups of bridges: simply supported and integral bridges. Comparisons are based on the seismic fragility of the bridges subjected to accelerograms of two seismic sources. Three-dimensional finite-element models of the bridges were created for each set of bridge samples, considering the nonlinear behaviour of critical bridge components. When the seismic hazard in the site is controlled by a few seismic sources, it is important to quantify separately the contribution of each fault to the structure vulnerability. In this study, seismic records come from earthquakes that originated in strike-slip and reverse faulting mechanisms. The influence of the earthquake mechanism on the seismic vulnerability of the bridges was analysed by considering the displacement ductility of the piers. An in-depth parametric study was conducted to evaluate the sensitivity of the bridges' seismic responses to variations of structural parameters. The analysis showed that uncertainties related to the presence of lap splices in columns and superstructure type in terms of integral or simply supported spans should be considered in the fragility analysis of the bridge system. Finally, the fragility curves determine the conditional probabilities that a specific structural demand will reach or exceed the structural capacity by considering peak ground acceleration (PGA) and acceleration spectrum intensity (ASI). The results also show that the simply supported bridges perform consistently better from a seismic perspective than integral bridges and focal mechanism of the earthquakes plays an important role in the seismic fragility analysis of highway bridges.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.6
• /
• pp.303-307
• /
• 2011

This paper describes an audio watermarking using Quantization Index Modulation (QIM) on significant peaks in frequency domain. The audio signal is broken up into L samples length frames with non-overlapping and rectangular window. The zero-crossing rate of each frame is calculated for decision whether it is proper to be watermarked or not. If the frame is legitimate, frequency magnitude response is computed by discrete Fourier transform. For the QIM, we set the quantization step size based on maximum value of frequency magnitude response and select n significant peaks with w samples around them in frequency domain, totally $n{\times}(w+1)$ samples. Finally, watermark embedding is performed. Decoder extract watermarks based on Euclidean distance, that is a blind detection. The proposed method is robust against many attacks of watermark benchmark.

• Journal of Agricultural Extension & Community Development
• /
• v.24 no.4
• /
• pp.249-264
• /
• 2017

Modeling the consumer demand of fresh meat requires its distinct feature which other types of food product does not have. Most of the fresh meat products are likely to be unbranded, bought on a weight basis and affected by macro shocks such as seasonality, holiday effect and the disease incidence. Furthermore, consumers tend to purchase multiple categories of fresh meat in a week. Therefore, we apply a multiple discrete/continuous model on fresh meat consumption data to study the effect of macro shocks on fresh meat sales as well as of price change. As a result shows, Each fresh meat is relatively more likely to be bought in peak season of each fresh meat compared with imported pork which is set as a 'reference category' in this analysis. For clarity of the effect of disease incidence, we perform further analysis regarding the effect of livestock disease on fresh meat purchase probability. It shows that the avian flu in 2014 has strong negative impact on the purchase probability of chicken and the foot-and-mouth disease has negative impact on the purchase probability of pork and beef for part of outbreak periods.

• Journal of Communications and Networks
• /
• v.12 no.6
• /
• pp.568-576
• /
• 2010

The paper presents a control architecture aimed at implementing bandwidth optimization combined with call admission control (CAC) over a digital video broadcasting (DVB) return channel satellite terminal (RCST) under quality of service (QoS) constraints. The approach can be applied in all cases where traffic flows, coming from a terrestrial portion of the network, are merged together within a single DVB flow, which is then forwarded over the satellite channel. The paper introduces the architecture of data and control plane of the RCST at layer 2. The data plane is composed of a set of traffic buffers served with a given bandwidth. The control plane proposed in this paper includes a layer 2 resource manager (L2RM), which is structured into decision makers (DM), one for each traffic buffer of the data plane. Each DM contains a virtual queue, which exactly duplicates the corresponding traffic buffer and performs the actions to compute the minimum bandwidth need to assure the QoS constraints. After computing the minimum bandwidth through a given algorithm (in this view the paper reports some schemes taken in the literature which may be applied), each DM communicates this bandwidth value to the L2RM, which allocates bandwidth to traffic buffers at the data plane. Real bandwidth allocations are driven by the information provided by the DMs. Bandwidth control is linked to a CAC scheme, which uses current bandwidth allocations and peak bandwidth of the call entering the network to decide admission. The performance evaluation is dedicated to show the efficiency of the proposed combined bandwidth allocation and CAC.