• 전기학회논문지
• /
• 제61권6호
• /
• pp.783-790
• /
• 2012

Electric Vehicles(EVs) and Plug-in Hybrid Electric Vehicles(PHEVs) which have the grid connection capability, represent an important power system issue of charging demands. Analyzing impacts EVs charging demands of the power system such as increased peak demands, developed by means of modeling a stochastic distribution of charging and a demand dispatch calculation. Optimization processes proposed to determine optimal demand distribution portions so that charging costs and demand can possibly be managed. In order to solve the problems due to increasing charging demand at the peak time, alternative electricity rate such as Time-of-Use(TOU) rate has been in effect since last year. The TOU rate would in practice change the tendencies of charging time at the peak time. Nevertheless, since it focus only minimizing costs of charging from owners of the EVs, loads would be concentrated at times which have a lowest charging rate and would form a new peak load. The purpose of this paper is that to suggest a scenario of load leveling for a power system operator side. In case study results, the vehicles as regular load with time constraints, battery charging patterns and changed daily demand in the charging areas are investigated and optimization results are analyzed regarding cost and operation aspects by determining optimal demand distribution portions.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.629-635
• /
• 2006

Manufacture of motor by laser has been studying realization that was demands on market for lightening and miniaturization. Moreover. early in the 1980s. manufacture of parts for automobiles by laser welding was already successfully introduced. The purpose of this study was to develop production technology of the high quality laminated stator core for motor by pulsed Nd:YAG laser heat source. In the event of adjusting defocus and voltage to control humping in laser welding of the laminated core. sound bead could be obtained. but deep penetration was not. Therefore. explosive evaporating plasma was controlled by adjustment of peak power on pulse width. Particularly, because explosive evaporating plasma induced high peak power, made molten metal in keyhole scatter. a suitable adjustment of peak power was required to obtain sound bead. As a results of experiment. sound bead and deep penetration could be obtained.

• 대한물리의학회지
• /
• 제16권1호
• /
• pp.33-39
• /
• 2021

PURPOSE: This study compared the body composition according to the sport of short-distance and middle & long-distance athletes to identify the factors that affect the body composition. METHODS: Forty-eight athletes selected as youth national athletes in 2019 participated in the study. The study participants measured the length of the lower extremities, body composition, and anaerobic ability. An independent sample t-test was conducted to compare the body composition according to the event. In addition, the Pearson correlation was performed to identify the factors that influence the body composition. RESULTS: The leg length of the Short and Middle & long-distance athletes were similar (p = .584). On the other hand, there were differences in the body fat percentage (p = .001), lean percentage (p = .001), and BMI (p = .001). In addition, the body fat percentage was correlated with the lean body mass (r = .419) and BMI (r = .447). Furthermore, the lean body mass was correlated with the BMI (r = .849) and the peak power (r = .662) and mean power (r = .686) of the anaerobic capacity. Moreover, the BMI was correlated with the peak power (r = .490) and mean power (r = .543) of the anaerobic capacity. The peak power of the anaerobic ability was correlated with the mean power (r = .931). CONCLUSION: The body composition differed according to the sport. The body fat percentage correlated with the lean body mass and the BMI. The lean body mass correlated with the BMI, peak power of anaerobic ability, and mean power. The BMI correlated with the anaerobic capacity.

• Structural Engineering and Mechanics
• /
• 제20권5호
• /
• pp.527-542
• /
• 2005

The main objective of this study is to examine the accuracy of the complete quadratic combination (CQC) rule with the modal responses defined by the ordinates of the uniform hazard spectra (UHS) to evaluate the peak responses of the multi-degree-of-freedom (MDOF) systems subjected to nonstationary seismic excitations. For the probabilistic analysis of the peak responses, it is considered that the seismic excitations can be modeled using evolutionary power spectra density functions with uncertain model parameters. More specifically, a seismological model and the Kanai-Tajimi model with the boxcar or the exponential modulating functions were used to define the evolutionary power spectral density functions in this study. A set of UHS was obtained based on the probabilistic analysis of transient responses of single-degree-of-freedom systems subjected to the seismic excitations. The results of probabilistic analysis of the peak responses of MDOF systems were obtained, and compared with the peak responses calculated by using the CQC rule with the modal responses given by the UHS. The comparison seemed to indicate that the use of the CQC rule with the commonly employed correlation coefficient and the peak modal responses from the UHS could lead to significant under- or over-estimation when contributions from each of the modes are similarly significant.

• 전자공학회논문지
• /
• 제50권8호
• /
• pp.76-82
• /
• 2013

실내 무선 통신 환경에서 채널 추정 에러가 존재할 때의 시역전 필터와 가중치 시역전 필터의 성능을 비교 분석한다. 시역전 필터는 수신신호의 최대점을 최대화 하기 위해 채널을 시역전하여 전처리 필터로 사용한다. 즉, 시역전 필터의 등가채널은 채널의 공분산의 형태로 최대점이 최대화 된다. 그러나 채널 추정 에러가 존재하는 경우 등가채널이 채널의 공분산이 아니기 때문에 최대점이 정확히 생기지 않게 된다. 가중치 시역전 필터는 최대점을 일정 수준 이상으로 보장하고 심볼 간 간섭을 줄이기 위해 사이드로브 신호를 최소화 하도록 최적화 문제를 통해 설계되었기 때문에 채널 추정 에러가 있는 경우에도 최대점을 보장할 수 있다.

• 한국ITS학회 논문지
• /
• 제8권1호
• /
• pp.110-118
• /
• 2009

PB/MC-CDMA(Partial Block Multi Carrier Code Division Multilple Access) 시스템은 사용자간의 코드 간 간섭을 줄임으로써 성능을 향상 시키는 시스템이다. 또한, 이 시스템은 심볼 간 간섭을 피하면서 주파수 다이버시티 이득을 얻을 수 있어 MC-CDMA(Multi Carrier Code Division Multiple Access) 시스템보다 향상된 성능을 보여준다. 그러나, 다중캐리어를 사용함으로써 PAPR 문제가 발생하여 시스템의 성능을 저하 시킨다. 이 논문에서는, PB/MC-CDMA 시스템에서 추가적인 정보 없이 여분의 확산 코드를 이용하여 최적화된 확산코드를 선택함으로써, 피크전력을 줄이는 방법을 제안한다. PB/MC-CDMA 시스템은 각 블록 단위로 확산 코드를 재사용함으로써, 여분의 코드가 남게 된다. 이러한 여분의 코드를 여러 개의 그룹으로 나누어 PAPR(Peak to Average Power Ratio)을 계산하고, 피크전력이 최소가 되는 코드를 선택하여 전송함으로써 PAPR 문제를 해결할 수 있는 방법이다.

• 한국운동역학회지
• /
• 제27권4호
• /
• pp.263-268
• /
• 2017

Objective: The purpose of this study was to show differences in impact variables between treadmills with (treadmills B, C, and D) and treadmills without a shock-absorbing function (treadmill A) to propose the development of a treadmill with improved or added shock-absorbing function to reduce impact shock. Method: Thirteen male students in their twenties who had habitual rear foot strike during running ran on four treadmills at 2.67 m/sec while ankle and neck acceleration data were collected. The magnitude of the ankle and neck acceleration peaks and peak positive ankle acceleration were calculated. The power spectral density of each signal was calculated to transform the ankle and neck accelerations in the frequency domain. Results: The peak positive ankle acceleration on treadmill B was significantly lesser than that on treadmills A and D, and that on treadmill C was significantly less than that on treadmill A (p < .01). Peak positive neck acceleration was not statistically different between the treadmills. The frequencies of the peak power of the ankle and neck acceleration signal within the lower and higher frequency ranges were not statistically different between the treadmills. The signal power magnitude of the ankle in higher frequency ranges on treadmill B was significantly less than that on treadmills A, C, and D (p < .01). The signal power magnitude of the ankle in higher frequency ranges was not statistically different between the treadmills. The signal power magnitudes of the neck acceleration signal within the lower and higher frequency ranges were not statistically significantly different between the treadmills. Conclusion: Our results indicate that the shock-absorbing function of a treadmill plays a role in reducing impact shock. Therefore, in future treadmill development, shock-absorbing function should be improved or incorporated to reduce impact shock to the body.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1081-1084
• /
• 1998

In this paper, we propose the bus coding technique for low power consumption. For CMOS circuit most power is dissipated as dynamic power for charging and discharging node capacitances.Though the I/O and bus are likely to have the very large capacitances associated with them and dissipate much of the power dissipated by an IC, they have little beenthe special target for power reduction. The conventional Bus-Invert coding method can't decrease the peak power dissipation by 50% because the additional invert signal line can invoke a transition at the time when Bus-Invert coding isn't used to code original bus data. The proposed technique always constraints the Hamming distance between data transferred sequentially to be below the half of the bus width, and thus decrease the I/O peak power dissipation and the I/O average power dissipation.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.870-879
• /
• 2011

Regulated peak power tracking (RPPT) systems such as the series structure and the series-parallel structures are commonly used in satellite space power systems. However, these structures process the solar array power or the battery power to the load through two cascaded regulators during one orbit cycle, which reduces the energy transfer efficiency. Also the battery charging time is increased due to placement of converter between the battery and the solar array. In this paper a parallel structure has been proposed which can improve the energy transfer efficiency and the battery charging time for satellite space power RPPT systems. An analogue controller is used to control all of the required functions, such as load voltage regulation and solar array stabilization with maximum power point tracking (MPPT). In order to compare the system efficiency and the battery charging efficiency of the proposed structure with those of a series (conventional) structure and a simplified series-parallel structure, simulations are performed and the results are analyzed using a loss analysis model. The proposed structure charges the battery more quickly when compared to the other two structures. Also the efficiency of the proposed structure has been improved under different modes of solar array operation when compared with the other two structures. To verify the system, experiments are carried out under different modes of solar array operation, including PPT charge, battery discharge, and eclipse and trickle charge.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.203-203
• /
• 2010

Nano-crystalline Si thin films were deposited on polymer and glass by inductively coupled plasma (ICP) - assisted RF magnetron sputtering at low temperature in an argon and hydrogen atmosphere. Internal ICP coil was installed to increase hydrogen atoms dissociated by the induced magnetic field near the inlet of the working gases. The microstructure of deposited films was investigated with XRD, Raman spectroscopy and TEM. The crystalline volume fraction of the deposited films on polymer was about 70% at magnetron RF power of 600W and ICP RF power of 500W. Crystalline volume fraction was decreased slightly with increasing magnetron RF power due to thermal damage by ion bombardment. The diffraction peak consists of two peaks at $28.18^{\circ}$ and $47.10^{\circ}\;2{\theta}$ at magnetron RF power of 600W and ICP RF power of 500W, which correspond to the (111), (220) planes of crystalline Si, respectively. As magnetron power increase, (220) peak disappeared and a dominant diffraction plane was (111). In case of deposited films on glass, the diffraction peak consists of three peaks, which correspond to the (111), (220) and (311). As the substrate temperature increase, dominant diffraction plane was (220) and the thickness of incubation (amorphous) layer was decreased.