• ETRI Journal
• /
• v.18 no.4
• /
• pp.229-244
• /
• 1997

Realization of the economical, reliable, and efficient ATM interface block becomes an important key to development of the ATM switching system when we consider new issues raised recently. In this paper, we summarize requirements for the ATM interface block and present the UNI (User Network Interface)/NNI (Network Node Interface) architecture to meet these requirements. We also evaluate the performance of the multiplexer adopting the various multiplexing schemes and service disciplines. For ATM UNI/NNI interface technologies, we have developed a new policing device using the priority encoding scheme. It can reduce the decision time for policing significantly. We have also designed a new spacer that can space out the clumped cell stream almost perfectly. This algorithm guarantees more than 99 % conformance to the negotiated peak cell rate. Finally, we propose the interface architecture for accommodation of the ABR (Available Bit Rate) transfer capability. The proposed structure that performs virtual source and virtual destination functions as well as a switch algorithm can efficiently accommodate the ABR service.

• The Journal of Korean Physical Therapy
• /
• v.30 no.3
• /
• pp.96-99
• /
• 2018

Purpose: The purpose of this study was to determine the effects of a chair backrest on respiratory function after prolonged sitting. Methods: Twenty-four young healthy subjects (12 males and 12 females) volunteered to participate in this study, and were equally allocated to a backrest (n=12) or a without backrest group (n=12). A spirometer was used to measure the respiratory functions of all subjects. Results: The chair with backrest group were significant difference in forced vital capacity (FVC), Forced expiratory volume in 1 second (FEV1), and peak expiratory flow (PEF) after sitting for 1 hour, compared with chair without backrest group (p<0.05). The chair with backrest group showed a significantly decreased in FVC, FEV1, and PEF. Conclusion: Using a chair without a backrest may help to reduce lung function deterioration as compared with a chair with a backrest.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.2
• /
• pp.80-87
• /
• 1994

Fetal monitoring is a routine procedure to obtain a record of physiologic functions during pregnancy and labor. It is required to determine fetal heart frequency accurately. There are various types of fetal heart rate(FHR) determination and the most frequently applied method is transabdominal Doppler ultrasound. However, in the case of weak or noise corrupted Doppler ultrasound signals, conventional peak detections and the autocorrelation function method have many difficulties to determine FHR precisely. Also the autocorrelation function is effected by threshold level and window size. To solve these problems, the high resolution pitch determination algorinthm is introduced to detect FHR from Doppler ultrasound signals. This scheme digitally processes Doppler ultrasound signal for digital rectification, envelope detection, decimation and correlation calculation of two interconnected segments and then FHR is determined by its maximal value. Even in the case of a greatly smeared noise signal, this algorithm is able to search FHR more accurately than autocorrelation function by means of compensating FHR with a constant correlation threshold. This algorithm is simulated by 386-MATLAB on PC 486/DX and verified that it is superior to the autocorrelation function method.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.4
• /
• pp.61-70
• /
• 1989

A new analytical method is proposed to monitor the chip form of cutting forces applying the techinque of signal process. Cutting experiments are carried out under various cutting conditons and cutting forces are measured in-processing through Tool Dynamometer. In this report, auto-correlation functions, frequency characteristics of dynamic force, high frequency distribution and Peak/RMS values are calculated from the measured cutting forces, and the concept of method is also discussed. The experimental results show that six types of the form of chips are possible to classify from the signal of cutting forces not related to cutting conditions.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.41-44
• /
• 2000

The mixed-state Hall angle has been measured in Hg-based superconducting thin films as functions of magnetic fields (H) up to 18 T. The temperature dependence of the Hall angle shows a peak (T$^{\ast}$) at low temperature, which is consistent with a crossover point from the thermally activated flux flow (TAFF) to a critical region (CR). At low fields below 10 T, T$^{\ast}$ shifts to low temperature with increasing fields. Interestingly, however, we found that T$^{\ast}$ is independent of fields above 10 T, suggesting unusual vortex state. A physical implication of H - T$^{\ast}$ line will be discussed.

• Progress in Superconductivity
• /
• v.2 no.1
• /
• pp.39-42
• /
• 2000

The mixed-state Hall angle has been measured in Hg-based superconducting thin films as functions of magnetic fields (H) up to 18 T. The temperature dependence of the Hall angle shows a peak (T*) at low temperature, which is consistent with a crossover point from the thermally activated flux flow (TAFF) to a critical region (CR). At low fields below 10 T, T* shifts to low temperature with increasing fields. Interestingly, however, we found that T* is independent of fields above 10 T, suggesting unusual vortex state. A physical implication of H-T* line will be discussed.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.144-146
• /
• 2002

The latest development flow of MCCB(Molded Case Circuit Breaker) is largely separated from which are high capability of interrupting compact of size and multi-ability in functions. As follow of development of industrial system. MCCB which are including communication function and having a ultimate interrupting capability is required in electrical system. to attain an effective limitation of the peak let-through current and the let-through energy, the arc has to move rapidly off the contacts and has to increase the arc voltage which mainly effect to interrupt. In this paper. we made high performance circuit breaker which including current limiting unit which is attached to the main which is simulated by CAE tool that are repulsion force and mechanical dynamics after that we tested and finally selected optimized for circuit breaker.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.731-732
• /
• 2011

This paper shows a whole noise quality checking system for the new developed 6th speed automatic transmission manufactured in USA. Due to demand for manufacturing of the high NVH quality transmissions in the mass product line, some special checking system called EOL is adapted. This EOL system is using vibration analysis technologies. Through adapting vibration analysis technologies and functions likewise RMS, Crest Factor, Harmonics, Peak, Band, and Order tracking, various noise problems caused by wear, nick, and deformations could be successfully detected and predicted. Therefore, automatic transmissions manufactured in the USA could get high NVH quality.

• The Korean Journal of Applied Statistics
• /
• v.7 no.2
• /
• pp.159-171
• /
• 1994

Some rank score tests are proposed for testing the equality of all sampling distribution functions against umbrella location-scale alternatives in k-sample problem. Only the case of known peak $\ell$ is considered. Under the null hypothesis and a contiguous sequence of unbrella location-scale alternatives, the asymptotic properties of the proposed test statistics are investigated. Also, the asymptotic local powers are compared with each others. The results show that the tests based on the Chen-Wolfe rank analogue statistic are more powerful than others for unequally spaced umbrella location-scale alternatives and robust.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2167-2169
• /
• 1999

A pulse transformer producing pulses with the peak power of 200-MW (400 kV 500 A at load side with $4.4{\mu}s$ flat-top) is required to drive the 80-MW pulsed klystron in the PLS linac. We have designed and manufactured the high power pulse transformer with 1 : 17 turn ratio. Its primary functions are to match the impedance of klystron tube to the modulators, and to provide step-up of the voltage. To obtain a fast rise time of the pulse voltage. Low leakage inductance and low distributed capacitance design is very important. In this paper, we discuss the equivalent circuit analysis of the pulse transformer, and present the full power performance test results of pulse transformer.