• Journal of Advanced Marine Engineering and Technology
• /
• 제15권5호
• /
• pp.38-46
• /
• 1991

In the design of an electric power plant, the capacity to meet the peak load demand is one of the important factors to be considered. This peak load usually occurs when the most of the cooling air-conditioning systems are being operated during daytime in summer season. Therefore, it is necessary to construct an additional electric power plant and to develop the new air-conditioning system for relieving the peak load. This paper analysed the performance characteristics of this experimental regenerative ice energy system by means of a bundle of the heat-pipes. And the result of this analysis was applied to the simulation of an air-conditioning system model. Also, an operation program of moisture air was made according to air load and in order to computerize the air-conditioning system a CAD program was developed by the properties of moisture air.

• Journal of Ecology and Environment
• /
• 제36권1호
• /
• pp.65-71
• /
• 2013

The concentration of airborne pollen is related to meteorological parameters. The main purpose of this study was to determine the correlation between airborne pollen and meteorological parameters in Ulsan based on sampling from 2010 to 2011. The primary factors of interest were differences in the pollen scattering start date, end date, and peak date, and the fluctuations in pollen concentration. The meteorological parameters that affected the start and peak dates of the pollen season were as follows. For Pinus and Alnus, the dates were correlated with sunshine and an increase in temperature, whereas for Quercus, the dates were correlated with increasing temperature. During the pollen season, Alnus peaked when the temperature was highest and Pinus peaked when the relative humidity was lowest. The concentration of airborne pollen was correlated with meteorological parameters during the sampling period as follows: Pinus, Alnus, and Humulus pollen concentrations were positively correlated with increasing temperature and negatively correlated with rainfall and relative humidity; Humulus pollen concentration was positively correlated with sunshine; and Quercus and Humulus pollen concentrations were positively correlated with wind speed.

• 전자공학회논문지 IE
• /
• 제49권2호
• /
• pp.40-45
• /
• 2012

본 논문은 전력용 변압기의 최적화된 온도제어를 위하여 부하율을 이용하여 권선최고점온도를 예측하고 냉각장치를 제어하는 방법을 제안하였다. 전력용 변압기의 최적화된 온도제어를 위하여, 하중함수를 사용하여 부하전류에 따른 부하율과 권선온도, 외기온도, 오일온도 등을 바탕으로 권선최고점온도를 예측하는 상관관계식을 제시한다. 또한, 이를 전력용변압기에 적용하여 제어한 결과를 제시한다.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.408-417
• /
• 1995

A study on the surface roughness variation of work roll and strip at the temper rolling was performed. The results were obtained with changes according to the surface roughness of work roll and method to make the peak count on the roll in the temper rolling, and factors to affect to the work roll surface in actual rolling machine (ie. Temper mill). The results suggests that the electro-discharge textured roll has mere uniform roughness distribution than shot blasted roll and its life time is two times longer than shot blasted because it has more sine wave roughness, and it is possible to control the Rmax. In shot blasting method, Surface roughness is related to the impeller speed, But it can't control the peak count.

• 한국환경과학회지
• /
• 제9권3호
• /
• pp.193-199
• /
• 2000

This study is carried out the analysis of the runoff characteristics for the design of the interior drainage systems by SWMM in urbanization basin. The basin analyzed in this study is Bumuh-chun basin which is located in Susung-gu of Taegu city. Huff method is used for rainfall distribution analysis. The optimal rainfall duration in Bumuh-chun basin is analyzed as about 90 minutes decided from comparison of arrival time and critical duration. Flood flow variation pattern is proposed through the comparison of the results of peak flow and peak time analyzed by SWMM about pre-urbanization and post-urbanization of Bumuh-chun basin. It is known that the variation of arrival time caused by the rapid increase of pavement rate in the upper area shows about 20∼25 minutes faster than pre- urbanization. Therefore, the management of surface water for design of water supply and drainage, and channel alteration has to considered the variation of geological factors according to urbanization.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.222-227
• /
• 2004

Under cyclic loading, the fatigue failures of welded joints occur at weld toes which induce stress concentration by weld shape. So we need to obtain the peak stress and the S-N curve to assess the fatigue strength of welded joints. However the measurement of peak stress is of high uncertainty and low reproducibility, so we use nominal stress instead in fatigue tests of welded joints. In this study, fatigue tests to obtain S-N curves and FE analyses to obtain stress concentration factors were conducted for the two types of cruciform fillet welded joints, that is, load-carrying and non load-carrying types. Then we changed the obtained S-N curves to that based on peak stress using the hot-spot stress concept. From the analyses of the S-N curves obtained, we have concluded that there is a need to develop a new method to evaluate the fatigue life.

• 한국지리정보학회지
• /
• 제5권4호
• /
• pp.9-23
• /
• 2002

본 연구에서는 홍수유출해석시 사용되는 지형특성인자와 수문기상학적 특성인자 추출에 소요되는 시간적 경제적 노력을 최소화함은 물론, 가능한 한 최소한의 인자를 사용하여 강우-유출예측이 가능하도록 모형을 구축하는데 목적을 두었다. 즉, 강우-유출해석시 일반적으로 사용되던 지형 지질특성, 토지피복상태 등의 인자를 고려하지 않고 단순히 유역의 하천 분기특성만을 고려한 유출해석방법 제안하고자 하였다. 연구대상유역은 금호강 상류에 위치한 영천댐유역을 대상으로 하여 주요 호우시 강우-유출량 관측자료와 DEM자료를 이용한 공간특성자료 추출결과를 이용하여 모형매개변수를 추출하였다. 분석결과 실측 첨두치에 대한 추정 첨두 유출량의 상대오차가 Clark 및 GIUH 모형에서 각각 1.9~23.9% 및 0.8~11.3%로 나타내고 있었으며, 전체적으로 볼 때 GIUH모형에 의한 수문곡선의 첨두치가 크게 나타나고 있는 것으로 검토되었다. 그리고, 계산된 첨두 유출량의 발생시각에 대한 검토결과 Clark 모형과 GIUH 모형을 이용한 경우에 대하여 각각 0.5~1시간 및 0~1시간의 상대오차를 나타내고 있었으며, 전체적으로 볼 때 GIUH 모형을 이용할 경우 기존에 사용되던 Clark 모형에 비해 홍수 첨두 발생시각이 늦은 것으로 검토되었다.

• The Korean Journal of Ecology
• /
• 제12권1호
• /
• pp.9-20
• /
• 1989

Annual production and decomposition of litter were studied in piuns rigida platation in Mt. Kwan-ak. The peak time of litter production was October-November. The litterfalll at that time was 54% of annual litter production. But the peak time of litterfall of reproductive parts was Junejuly. The peak times of litter production in Alnus hirsuta plantation were June-July, and November. It is thought that difference of seasonal distribution of letterfall between two forest types were assigned to litter falling factors such as temperature and insects. Total amount of letter loss increased according to time. Particulary, the peak time of loss rate was July-August. It was shown that the protein and phosphorus were accumulated in the letter for an experimental period. The amount of crude protein increased to 150% of initial amount. The amount of potassium was increased by August and then decreased rapidly. The contents of crude fat, holocellulose, lignin, and Na were decreased slowly. The loss of holocellulose was the largiest among them. Calcium was in steady state. It was thought that this variation pattern was assigned to leaching of soluble parts by high temperature, rainfall and growth rate of microorganisms.

• 자원ㆍ환경경제연구
• /
• 제15권2호
• /
• pp.269-296
• /
• 2006

본 연구는 신 재생전원설비가 전력공급설비로서의 역할을 키워감에 따라 나타날 수 있는 공급상의 문제를 신 재생에너지원별로 확률적인 분석을 통하여 제기하였다. 각 원별 패턴은 풍속, 일사량, 그리고 월력에 근거한 조수간만의 차이 등에 의해 영향을 받으며 이들은 확률적 분포를 갖는다는 점에 주목하여 피크공급에 대한 각 원별 기여도에 대한 확률적 분석을 시도하였다. 분석의 결과, 통상적인 전력수급계획에서 각 에너지원별 혹 발전원별 설비이용률만을 고려하여 설비계획에 반영하는 기존의 방법론이 갖는 한계를 보여준다.

• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.115-121
• /
• 2008

The present study performed low-pressure steam curing with mortar specimens in order to examine the temperature profile and strength development of steam curing in high-strength specimens of 100MPa. In addition, as a basic research to utilize PC products, we examined the effects of curing temperature and time in steam curing cycle on strength development resulting from the hydration of cement within the range of high strength by changing four factors affecting the quality of PC displacement time, peak curing temperature, peak temperature duration, and ascending and descending gradient of temperature - in various patterns, and analyzed the optimal strength development characteristic based on the relation between temperature profile and strength development. With regard to the high-temperature curing characteristic of PC, we performed an experiment on the strength characteristic according to the temperature profile of high-strength mortar, and from the results of the experiment according to curing characteristic, displacement time, peak curing temperature, peak temperature duration, and ascending and descending gradient of temperature, we drew conclusions as follows.