• 공업화학
• /
• 제22권4호
• /
• pp.439-443
• /
• 2011

수산화마그네슘이 첨가된 저밀도 폴리에틸렌-에틸렌 비닐 아세테이트 혼합물의 연소성을 시험하였다. 저밀도 폴리에틸렌-에틸렌 비닐 아세테이트에 수산화마그네슘을 40~80 wt% 첨가하여 용융 혼합하고 성형 후 콘칼로리미터(ISO 5660-1)를 이용하여 그의 연소성을 시험하였다. 수산화마그네슘을 첨가한 시험편은 첨가하지 않은 시험편에 비하여 그의 연소성이 감소하였다. 이것은 순수한 저밀도 폴리에틸렌-에틸렌 비닐 아세테이트에 첨가한 수산화마그네슘의 흡열 분해 때문에 연소 억제성이 향상된 것으로 생각된다. 수산화마그네슘을 첨가한 시험편은 첨가하지 않은 시험편에 비해 낮은 최대열방출률과 낮은 유효연소열을 나타내었고, 수산화마그네슘 함량이 증가할수록 착화시간은 길어지고, 최대열방출률은 감소하였다.

• 제3의학
• /
• 제1권1호
• /
• pp.103-113
• /
• 1996

It is thought that the quantity and quality of the heat stimulation and the mechanism of heating process are important to understand the moxa-combustion. In order to get the basic data on the effective moxa-combustion method, combustion temperature changes (average temperature, peak temperature, average gradient temperature and maximum gradient temperature) of the heating period were measured respectively by the density of moxa material. For the experiment, samples of $300mg/0.26cm^3$ , $400mg/0.26cm^3$ and $500mg/0.26cm^3$ of moxa material were molded in a conical mold with each 10mm in diameter and height. 1. The average temperature and peak temperature of heating period on the moxa-combustion showed higher in the $400mg/0.26cm^3$ and $300mg/0.26cm^3$ than in the $500mg/0.26cm^3$ sample respectively. 2. The average gradient temperature of heating period on the moxa-combustion rose quickly in the $300mg/0.26cm^3$, $400mg/0.26cm^3$ and $500mg/0.26cm^3$ in that order and the maximum gradient temperature rose more quickly in the $300mg/0.26cm^3$ and $400mg/0.26cm^3$ than in the $500mg/0.26cm^3$ sample respectively. According to the above results, it is concluded that the density of moxa material is (the) more important (factor) than the weight or volume of moxa material on the combustion temperature changes of the heating period for the evaluation of the quality and quantity of moxa-combustion.

• 한국화재소방학회논문지
• /
• 제29권4호
• /
• pp.67-72
• /
• 2015

본 연구는 콘칼로리미터 실험을 통해 건축물 마감재와 가구소재로 널리 적용되는 목재 가공품의 화염연소와 훈소시 화재특성을 파악하고자 한다. 시험대상 목재 가연물은 MDF, 합판, 칩보드이며 $50kW/m^2$의 복사열유속을 시편에 가하여 점화를 유도하였다. 실험과정에서 화재특성을 나타내는 발열량, 연소가스 생성율, 유효연소율 등의 주요 인자를 가연물의 두께에 따라 정량화하였다. 실험결과 초기 평면방향의 화염전파와 후기 시편의 관통에 의한 화재확대로 인해 단위면적당 발열량에 대한 두 개의 피크점이 관측되었다. 화염연소시의 질량감소율이 훈소시에 비해 5배 이상 높게 나타난 반면에 훈소과정에서 CO 생성율은 화염연소에 비해 10배 이상 높게 측정되어 훈소시 높은 독성가스 생성율을 보였다. 본 연구는 목재 가연물의 화재성상을 이해하고 화재해석을 위한 물성자료로 활용될 수 있다.

• 공업화학
• /
• 제24권6호
• /
• pp.616-620
• /
• 2013

본 연구에서는 자원 재활용-에너지에 바탕을 둔 돈분, 계분, 혼합물의 연소특성에 대하여 고찰하였다. 시험편은 건조 오븐을 이용하여 항량까지 건조시킨 후에, 콘칼로리미터(ISO 5660-1)를 이용하여 연소성질을 시험하였다. 그 결과 돈분의 최대유효연소열(78.72 MJ/kg)은 계분(69.41 MJ/kg)과 비교하여 탄화수소의 많은 양 때문에 비교적 증가했다. 또한 돈분의 $CO_2$ 발생속도(0.1959 g/s)와 총연기발생률($419m^2/m^2$)도 각각에 대하여 계분보다 증가하였다. 반면에 계분의 CO 발생량(0.0996 kg/kg)과 CO 발생속도(0.0034 g/s)는 계분이 함유하고 있는 많은 무기물 함량 때문에 각각 돈분보다 높았다. 따라서 높은 연소 에너지는 탄화수소 함량에 의존하여 발생되는 것으로 판단된다.

• 한국화재소방학회논문지
• /
• 제34권4호
• /
• pp.13-21
• /
• 2020

본 연구에서는 건축내장용 합판류 목재를 대상으로 목재의 두께별 다양한 입사열유속에 따른 연소특성 측정 실험을 수행하였으며, 측정한 연소특성은 EHC, HRR peak 및 도달시간, MARHE, 인화온도이다. 실험에 사용된 목재 시편은 4.8~18 mm 두께, 목재 시편에 유입되는 입사열유속은 25, 35, 50 및 60 kW/㎡을 적용하였으며, 목재 시편의 종류는 MDF 2종, 파티클 보드, 일반 합판이다. 종합적인 비교를 통하여 연소특성별 각각의 목재에 해당하는 화재패턴을 분석하여 화재에 대한 위험성을 검토하였다. 파티클 보드의 경우 화재 위험성이 높게 나타났으며, 제시한 연소특성 정량화 결과는 복합 가연물의 화재하중 산정에 중요한 입력 요소로 기여될 수 있다.

• Korean Journal of Acupuncture
• /
• 제27권4호
• /
• pp.35-47
• /
• 2010

Objectives : To characterize the thermal properties of traditional warm needle and new warm needle with various air flows as an important environmental factor and to suggest the necessity of maintaining suitable environment of clinics to maximize their efficacy. Methods : We measured the temperature characteristics of traditional moxa warm needle and new moxa charcoal warm needle by applying an automatic temperature acquisition system with thermocouples while external various air flows were supplied. Temperatures of two positions at the needle body were measured while a moxa cone burned. Typical temperature characteristics like peak temperature, duration, curve shape and the efficiency of the heat stimuli by heat amount analysis were executed. Results : Both warm needles showed similar temperature curve with an increase in the air flow. Peak temperature and duration of effective heat decreased with the air flow, as shown in indirect moxibustion on garlic. The temperature change pattern by the air flow became more apparent when the total combustion heat was compared with the effective heat. The values from two positions on the needle body were significantly different, showing a distance dependency from the heat source of warm needle acupuncture. Conclusions : Thermal properties of warm needle acupuncture was observed variously with surrounding air flow of 0.0 - 0.7 m/s. It emphasized the importance of environmental control as well as the warm needle itself such as heat source and needle. The latter has already been known to deliver designated heat to subjects. It also indicated the importance of education and skill of the practitioners of warm needle acupuncture.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.18-25
• /
• 2002

Research to discuss the fire performance of materials requires tools for measuring their burning characteristics and validated fire growth models to predict fire behavior of the materials under specific tire scenarios using the measured properties as input for the models. In this study, burning characteristics such as time to ignition, weight loss rate, flame spread, heat release rate, total heat evolved, and effective heat of combustion for four types of wood-based materials were evaluated using the cone calorimeter and inclined panel tests. Time to ignition was affected by not only surface condition and specific gravity of the tested materials but also the type and magnitude of heat source. Results of weight loss rate, measured by inclined panel tests, indicated that heat transfer from the contacted flame used as the heat source into the inner part of the specimen was inversely proportional to specific gravity of material. Flame spread was closely related with ignition time at the near part of burning zone. Under constant and severe external heat flux, there was little difference in weight loss rate and total heat evolved between four types of wood-based panels. More applied heat flux caused by longer ignition time induced a higher first peak value of heat release rate. Burning characteristics data measured in this study can be used effectively as input for fire growth models to predict the fire behavior of materials under specific fire scenarios.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권7호
• /
• pp.1123-1130
• /
• 2004

Numerical simulations have been carried out to investigate the effect of nozzle hole geometry on the combustion characteristics of the large diesel engine. 6S90MC-C. Spray and combustion phenomena were examined numerically using FIRE code. Wane breakup and Zeldovich models were adopted to describe the atomization characteristics and NOx formation processes. Predictions on the cylinder peak pressure and NOx emission were first verified with the experimental data to confirm the reliability of numerical calculations. The comparison results showed good agreements within the range of 0.64% and 4.6% respectively. Finally, the effects of fuel spray angle and diameter on the engine performance were investigated numerically to find the optimum nozzle hole geometry considering fuel consumption, NOx emission and heat flux of the combustion chamber wall. It was concluded that the combustion gas recirculation in cylinder by changing fuel injection direction is an effective method to reduce NOx emission by about 10% with increasing fuel oil consumption, 1.4% in a large diesel engine.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권9호
• /
• pp.911-917
• /
• 2015

본 논문에서는 함정용 디젤연료를 단기통 커먼레일 디젤엔진에 적용하여 연료분사압력 변화에 따른 분사율 특성, 거시적 분무 특성 및 연료분사시기와 연료압력변화에 따른 연소 및 배기가스 배출특성을 분석하는데 초점을 두었다. 분사율 특성은 Bosch법을 적용한 분사율 측정 시험 장치를 이용하여 분석하였고, 거시적 분무 특성은 정적용기 및 초고속 카메라를 이용하여 분석하였다. 또한, 연료분사시기 및 연료압력 변화를 정밀하게 제어할 수 있는 단기통 엔진을 이용하여 연소 및 배기가스 배출특성을 분석하였다. 30MPa과 50MPa의 분사조건에서 초기 분사율은 50MPa의 분사조건에서 크게 나타났으며, 분무 발달(투과) 또한 동일시간대에서 큰 것으로 분석되었다. 연료분사시기가 지각될수록 실린더 내부 최대 압력과 최대 열발생량은 떨어지는 경향으로 나타났으며, 고압분사조건에서 실린더 내부 최대압력과 최대 열발생량은 다소 큰 것으로 분석되었다. 고압분사조건에서 도시평균유효압력은 낮은 것으로 분석되었고, 연료분사시기가 TDC 쪽으로 지각될수록 도시평균유효압력 및 토크는 증가하는 것으로 나타났다. 연료분사시기가 $BTDC20^{\circ}$(30MPa)와 $BTDC15^{\circ}$(50MPa)에서 질소산화물 발생수준이 가장 높았으며, 일산화탄소는 $BTDC30^{\circ}$를 기준으로 지각될수록 저감되었다.

• International Journal of Automotive Technology
• /
• 제8권4호
• /
• pp.421-428
• /
• 2007

This paper investigates the combustion and emission characteristics of a compression ignition engine fueled with neat and blended Shell's gas-to-liquid (GTL) fuel, which was derived from natural gas through the Fischer-Tropsch process. The experiments were conducted in a 6-cylinder DI diesel engine with pump timing settings of $6^{\circ},\;9^{\circ}\;and\;12^{\circ}$crank angle before TDC over ECE R49 and US 13-mode cycles separately and compared to a conventional diesel fuel. The results show that GTL exhibited almost the same power and torque output, improved fuel economy and effective thermal efficiency. It was found that GTL displayed lower peak in-cylinder combustion pressure and maximum heat release rate (HRR), the timings of the peak pressure and the maximum HRR were generally delayed, and the combustion durations were almost equivalent for diesel and GTL under the same speed-load condition. The results also indicate that, compared to diesel fuel, GTL blends showed a trend forward decreasing four regulated emissions simultaneously and a higher GTL fraction in blends contributing to further reductions in the emissions. In particular and on average, neat GTL significantly reduced HC, CO, NOx and PM by 16.4%, 17.8%, 18.3% and 32.4%, respectively, for all cases.