• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.315-322
• /
• 2024

In this paper, we proposes real-time operating system based PCM encoder for telemetry system that must transmit frames within a set time. In the case of large aircraft, the complexity of the system is increasing because a lot of state information is measured from each sensor and peripheral device. In addition, as the amount measurement data increases, the role of PCM encoder to transmit frames within a set time is becoming important. Existing encoder is inflexible when changing specifications or implementing additional features. Therefore, a design is needed to supplement this. We propose a PCM encoder design applying uC/OS-II. In order to confirm the validity, a simulation was performed to measure the execution time of the task to confirm the performance.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.30 no.12
• /
• pp.22-25
• /
• 2001

현재 보급되어 있는 대부분의 축열시스템은 일반적으로 물(얼음)을 PCM으로 사용하는 빙축열 방식이다. 본 원고에서는 $0^{\circ}C$이하의 상변화온도를 갖는 저온 PCM에 대한 기본 개념과 응용범위에 대하여 소개하고자 한다.

• The Magazine of the IEIE
• /
• v.3 no.2
• /
• pp.46-55
• /
• 1976

PCM 실험장치로 사용할 수 있도록 설계 제작한 2-channel PCM 송수신 시스템을 소개한다. 전체시스템의 계통과 기본전 설계조건이 검토된 후, 각 부분에 대한 구체적 설계제작 특성 및 문제점 등이 제시되었다. 또한 본 장치로서 가능한 실험중에서 몇가지를 설명 검토한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.790-792
• /
• 2004

본 논문은 PCM(Possibilistic C-Means) 알고리즘과 베이시안 분류 알고리즘을 통합한 고해상도 위성영상의 효과적인 분류방법을 제안하였다. 제안된 알고리즘은 학습데이터를 참고로 하여 PCM 알고리즘을 반복적인 과정 없이 수행한다. 각 분류항목별로 분류된 데이터에서 평균내부거리 내부에 해당되는 데이터들을 선정하여 각 항목별 비율을 구한 후 베이시안 분류기법의 사전확률로 적용하여 분류를 수행한다 PCM 알고리즘은 각 데이터와 특정 클러스터와의 거리에 소속도를 부여하는 퍼지 C-Means 알고리즘과 달리 소속도를 각 데이터와 클러스터 중심간의 절대거리에 의존하는 방법으로 퍼지 C-Means 알고리즘이 가지는 상대성 문제를 해결하였다. 제안된 분류 기법을 고해상도 다중분광 데이터인 IKONOS 위성영상에 적용하여 분류를 수행한 후 최대우도 분류기법과 비교한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.7
• /
• pp.779-784
• /
• 2005

This paper presents the theory of similarity transformations applied to the momentum and energy equations for laminar, forced, external boundary layer flow over a horizontal flat plate which leads to a set of non-linear, ordinary differential equations of phase change material slurry(PCM Slurry). The momentum and energy equation set numerically to obtain the non-dimensional velocity and temperature profiles in a laminar boundary layer are solved. The heat transfer characteristics of PCM slurry was numerically investigated with similar method. It is clarified that the similar solution method of Newtonian fluid can be used reasonably this type of PCM slurry which has low concentration. The data of local wall heat flux and convective heat transfer coefficient of PCM slurry are higher than those of water more than 150$\~$200$\%$, approximately.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.4
• /
• pp.79-84
• /
• 2010

In recent years, conventional streetlight is replaced by LED streetlight to reduce power consumption dramatically and to maximize lighting effects. However the characteristic of power LED itself driven by high current to increase the illumination, we need to develop effective heat release device. This study suggests new concept of heat dissipation device using PCM (Phase Change Material) and shows an experiment results to investigate thermal effects of PCM.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.509-523
• /
• 1998

Before an actual military communications satellite is designed and constructed, a feasibility study should take place. The basic functions of such system can be observed and demonstrated in an X-Band payload simulator. For this purpose a Payload Concept Model (PCM) for X-Band payload subsystem has been developed to simulate the workings of an actual military communications payload. This paper explains and illustrates the mechanical design, manufacture, and integration of the PCM. Basic RF tests also have been performed in order to verify the design requirement of the system. The results demonstrate successful development of the PCM and operation without RF losses.

• Journal of Biosystems Engineering
• /
• v.33 no.5
• /
• pp.303-308
• /
• 2008

The freezing characteristics of two kinds of phase change materials (PCM) encapsulated in a spherical container were investigated with various cooling air temperatures and velocities. The super cooling and solidification time of PCM were highly affected by cooling air temperature and velocity. The experimental equations are derived to express total solidification time of the PCM in terms of Nusselt number and dimensionless temperature.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.12 no.4
• /
• pp.206-213
• /
• 2004

Cycle test for developed phase change material (PCM) is necessary in order to assess the variation of latent heat, which decreases with time by deterioration. T-history method and measurement using heat-flux meter are appropriate for the cycle test in a tube filled with PCM because they do not need an extraction of sample in measuring heat of fusion. In the present study, these methods were applied to a PCM having a melting point below a room temperature, different to the past studies for PCMs melting above a room temperature. As a result of experiment using pure water as specimen, we can obtained rea-sonable values for heat of fusion.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1663-1666
• /
• 2003

TMA clathrate that is used by PCM of ice storage system in this research creates hydrate crystallization at higher temperature than pure water, and application is expected as PCM because having comparative big dormant temperature without phase separation phenomenon. In case this research uses TMA clathrate by PCM, choose admixture by purpose to control or remove subcooling of TMA clathrate and evaluated experimentally. Subcooling is improved and can expect contraction of freezing machine running time and increase of coefficient of performance as that add admixture to TMA clathrate conclusively. Also, may supply thermal storage system that apply low temperature potential heat thermal storage material that subcooling is improved more extensively laying stress on medium size building and small size building, can expect allowance through localization of ice storage system.