• Toxicological Research
• /
• v.13 no.3
• /
• pp.187-191
• /
• 1997

Cell death induced by polychlorinated biphenyls (PCBs), environmental toxicant, was investigated in mouse splenocytes. The fragmentation of intact DNA, a parameter of apoptotic cell death, was evaluated qualitatively by agarose gel electrophoresis analysis and quantitatively by diphenylamine reaction method. PCBs induced apoptotic cell death of splenocytes in a dose- and time- dependent manner. The effect of serum on the apoptotic cell death induced by PCBs was also investigated. The DNA fragmentation induced by PCB treatment in serum-free medium was clearly inhibited by an addition of serum to the culture medium. The decrease of DNA fragmentation due to serum addition was accompanied with the increase of cell viability.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.76-85
• /
• 2003

In this paper, a technical method for removing the solder from PCBs has been proposed to simplify the pulverizing process and to get higher quality of materials for recycling of the electronic parts in the Printed Circuit Boards (PCBs). There are several techniques to remove the solder from PCB, such as physical and chemical method, vibration, suction and blowing and so on. Among them, the suction technique turned out the best method by investigation. In the suction method, there are three variables for removing the solder. They are a temperature of the thermal wire, a velocity of moving PCB and a gap between PCB and thermal wire. To find the optimal variables for the system, an experiment has been conducted by a trial and error method. The optimal variables were found $220^{\circ}C$ of temperature, 11.58mm/s of velocity, 10mm of gap (A gap between suction hole and bottom of PCBs is 5mm). The result of the experiment shows that 50% of the solder were removed.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.170-174
• /
• 2006

In this paper electromagnetic topology (EMT) is used to analyze the lumped components on printed circuit boards (PCBs). It is difficult to obtain desirable results about the electromagnetic coupling problems by using a numerical or an experimental method on complex systems. The EMT can be considered as a helpful method to the analysis of electromagnetic interference / electromagnetic compatibility (EMI/EMC) problems in the complex system. To verify the validity of this method, three types of the PCBs mounting a simple circuit are fabricated and experimented.

• Animal cells and systems
• /
• v.5 no.4
• /
• pp.327-331
• /
• 2001

There is a critical developmental period during which brain sexual differentiation proceeds irreversibly under the influence of gonadal hormone. Recently, kinesin superfamily-associated protein 3 (KAP3) gene expressed during the 'critical period' of rat brain differentiation was identified by us (Choi and Lee, 1999). KAP3 functions as a microtubule-based motor that transports membranous organelles anterogradely in cells, including neurons (Yamazaki et al., 1996). mRNA level of KAP3 gene markedly increased before the initiation of puberty. Neonatal treatment of estrogen clearly inhibited the prepubertal increase in KAP3 mRNA level (Choi and Lee, 1999). In the present study, we aimed to investigate the effects of polychlorinated biphenyls (PCBs), as endocrine disruptors (EDs) on the expression of KAP3 gene during the 'critical period' of rat brain development. In our data, PCBs significantly decreased the expression of KAP3 gene in the fetal (day 17) and the neonatal (day 6 after birth in) male and female rat brains. The body weight and the breeding ability were significantly decreased in the PCBs-exposed rats compared with the control. These results showed that PCBs affect the transcriptional level of brain sexual differentiation related gene, KAP3, in the fetal and the neonatal rat brains. The maternal exposure to the PCBs may lead to toxic response in embryonic brain sexual differentiation and breeding ability after sexual maturation. This study indicates that KAP3 gene may be useful as a gene marker to analyze the molecular mechanism of toxic response in the animal brain development and sexual maturation exposed to PCBs.

• Analytical Science and Technology
• /
• v.18 no.5
• /
• pp.410-418
• /
• 2005

PCBs had numerous uses such as hydraulic fluid, heat exchange fluid, sealant, lubricant, and carbonless copy paper. They are most likely found in electric utilities, power stations, industrial facilities, electronic manufacturing plants, petrochemical plants, railroad systems, electric equipment repair facilities, mining sites (active or abandoned), and military camps. Due to its outstanding chemical and thermal stabilities and electrical insulation properties, the commercial and industrial products of PCBs, such as Aroclors, Kaneclors, Clophens, Phenaclors etc., had been widely used as thermal oil and transformer oil from 1930s until the 1970s. The transformer oils were analyzed as a main source of polychlorinated biphenyls (PCBs) emission into the environment. Qualitative estimation of oil extracts as carried out with Aroclor 1242, 1248, 1254, 1260. The transformer oils contained the pure and mixed of Aroclor 1242, Aroclor 1254, and Aroclor 1260. Also, commercial screening kit of 20 ppm and 50 ppm were applied to the transformer oil samples.

• Resources Recycling
• /
• v.24 no.1
• /
• pp.66-72
• /
• 2015

Various waste PCBs arose during disassembly of LCD TVs and monitors in which they originally functioned for transmission of imaging signal, power supply, and imaging control. In those functional PCBs, gold and copper are contained at far more acceptable level, exceeding mining grade ores. Those valuable metals and their contents widely vary with functionality and end use of PCBs. Therefore, compositional analysis of individual waste PCBs from disassembled LCD TVs and monitors were performed in the present study to classify them into three categories: high gold yield and low gold yield PCBs and those without gold contents. Besides, additional chemical analysis was made to reveal gold and copper contents in the waste PCBs arising from actual disassembly/separation of end-of-life LCD TVs and monitors.

• Ocean and Polar Research
• /
• v.33 no.1
• /
• pp.45-53
• /
• 2011

Distribution of Polychlorinated biphenyls (PCBs) and organochlorine pesticides in sediments, seawater and fish tissues were examined. Concentrations of ${\Sigma}PCBs$ and ${\Sigma}DDTs$ in the intertidal sediments of Asan Bay ranged from $1.90{\sim}3.27\;ng\;g^{-1}$ dw (dry weight) and $0.51{\sim}1.26\;ng\;g^{-1}$ dw, respectively. ${\Sigma}PCBs$ concentrations in the tissue of greenling (Hexagrammos otakii), olive flounder (Paralichthys olivaceus) and finespotted flounder (Pleuronichthys cornutus) were $1.27{\pm}0.55$, $1.30{\pm}0.71$ and $1.19{\pm}0.43\;ng\;g^{-1}$ ww (wet weight), respectively. The profile of PCBs in the sediments and the 3 species of fish differed as witnessed by the dominance of tetra- to penta-chlorinated congeners in sediments while penta- to hexa-chlorinated congeners dominated in fish. ${\Sigma}DDTs$ concentrations were $0.67{\pm}0.52$, $0.79{\pm}0.61$, $1.58{\pm}1.05\;ng\;g^{-1}$ ww respectively in the tissue of greenling, olive flounder and finespotted flounder. The p,p'-DDE appeared to be the most important metabolite of DDT in studied fishes. The concentrations of PCBs and organochlorine pesticides measured in this study for fish were generally lower than those of previous studies. Compared to the pollutant concentration quality guidelines in marine fish, the environment of Asan Bay appears to be in a healthy state.

• Applied Biological Chemistry
• /
• v.23 no.1
• /
• pp.58-63
• /
• 1980

Present investigation is undertaken to evaluate residues of organochlorine pesticides and PCBs in river sediments and cultivated soils by GLC. Main sampling areas chosen were three industrial estates, Suwon, Iri and Kumi. Samples consist of river sediments and cultivated soils, in Suwon, Iri and Chilgok, which are likely to be accumulated with PCBs from nearby factories. Organochlorine pesticide residues were found in all sediments and soil samples while no PCBs residue was detected in all samples analyzed. The pesticide residues were greatest in the Suwon and least in Chilgok soils. p,p'-DDT and BHC isomers $({\alpha}-,\;and\;{\gamma}-)$ were found in all soil samples. p,p'-DDT, at the range of 0.006-0.840 ppm, was the most abundant residues among organochlorine insecticides.

• Journal of Environmental Health Sciences
• /
• v.40 no.2
• /
• pp.147-156
• /
• 2014

Objectives: This study was carried out to examine whether the apparent photolysis with or without sensitizers [NaOH and humic acid (HA)] was prompted photodegradation of polychlorinated biphenyl (PCB) in aqueous solution. Methods: PCBs photodegradation occurred using fluorescence black lamps at ${\lambda}_{max}=300nm$. PCB congeners were exposed in 10 ppm HA or 0.05N NaOH solutions, to investigate the decreasing profile of PCB concentration with time. The PCBs were then analyzed by gas chromatography/mass spectrometry (GC-MS). Reductive degradation profile of PCB congeners in the presence of both sensitizers under oxygen-saturated protic conditions was described using the wind-rose diagrams. Results: Use of HA or NaOH decreased PCB concentration with time in the dark and on irradiation, indicating that photolysis underwent through reductive dechlorination through energy transfer and possibly with reactive oxygens. The dechlorination was marked by a chromatographic shift, observed in the GC-MS plots. Therefore it is logical to assume that increasing the dose of sensitizers would increase the photodegradation rates of PCBs. The half-lives of pentachloro-PCB (penta-3) in 0.05N NaOH and 10 ppm HA were estimated at about 47 hours and 39 hours, respectively, under the same experimental conditions of photolysis. It was found that the rate of photolysis of pentachloro-PCB in aqueous solution followed apparent first-order kinetics compared to other congeners. Conclusion: Photochemical degradation (using 328 nm UV light) of penta- and hexa-PCBs in HA or alkaline solution is a viable method for pretreatment method. The results are helpful for the further comprehension of the reaction mechanism for photolytic dechlorination of PCBs in aquatic system.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.117-121
• /
• 1998

In the study to reduce the error on the method of sampling pine needles to monitor the atmospheric concentration of polychlorinated biphenyls(PBCs),it was found that: 1. Concentration of PCBs almost linearly increased from new to three-years-old pine needles, so that the biomonitoring method using pine needles canbe applied to measuring long-term contamination from air in a local area. Needles of differernt age should not be mixed in sampling but be seperately analysed .It no good idea comparing PCB concentrations of differently aged needles. 2. Concentratio n of PCBs on pine needles had nothing to do whit the indivisual and age of the pine tree. 3. Concentration of PCBs on pine needles growing avobe was lower than that on needke below. 4. Concentration of PCBs on pine needles locatied in poorly ventilative places such as needle of a forest was lower than that on needles in well-ventilated areas.